# SR swap in progress.....

**URL:** <https://forums.speedlife.net/t/sr-swap-in-progress/84972>\
**Category:** SON240sx Automotive\
**Created:** [April 12, 2005, 8:33pm UTC](https://forums.speedlife.net/t/sr-swap-in-progress/84972 "2005-04-12T20:33:00Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![koz](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/koz/32/5478_2.png) [@koz](https://forums.speedlife.net/u/koz)\
**Post date:** [April 12, 2005, 8:33pm UTC](https://forums.speedlife.net/t/sr-swap-in-progress/84972/1 "2005-04-12T20:33:00Z")

</div>

Well the KA finally came out today. The only part that really gave us a problem was the clutch line… I couldn’t seperate any of the hardlines from the softline on the slave cylinder. I ended up cutting a hardline coming off the dampener. I’m hoping it won’t be a problem when I bypass it later. I also made a huge fackin mess of fluids all over my driveway… the gas was pouring out of the fuel lines like a mofo #-o

Would anyone with experience (In Barrie) be willing to stop by and supervise while the SR goes in… probably next week sometime. I guess my main concerns are the clutch line, PS lines, and heater hoses. I’m working from a complete front clip (courtesy of Varun).

Anyways, lots of beer and pizza will be provided for anyone interested. lemme know, and I’ll PM you more info. :wiggle:

---

<div class="post-metadata">

**Author:** ![Lith](https://avatars.discourse-cdn.com/v4/letter/l/fbc32d/32.png) [@Lith](https://forums.speedlife.net/u/Lith)\
**Post date:** [April 12, 2005, 8:38pm UTC](https://forums.speedlife.net/t/sr-swap-in-progress/84972/2 "2005-04-12T20:38:03Z")

</div>

Hey you bought that white front clip from Varun with the redtop, right?

good luck with the swap man… hopefully you won’t have too much trouble finishing it up.

---

<div class="post-metadata">

**Author:** ![koz](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/koz/32/5478_2.png) [@koz](https://forums.speedlife.net/u/koz)\
**Post date:** [April 12, 2005, 8:45pm UTC](https://forums.speedlife.net/t/sr-swap-in-progress/84972/3 "2005-04-12T20:45:35Z")

</div>

yeah, that’s the one… I’m pretty sure I’ve got everything I need to get this sucker going (Walbro pump, 3" downpipe and exhaust). I’m hoping it goes smoothly. :?

---

<div class="post-metadata">

**Author:** ![Sasha\_SG](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/sasha_sg/32/5477_2.png) [@Sasha\_SG](https://forums.speedlife.net/u/Sasha_SG)\
**Post date:** [April 12, 2005, 9:20pm UTC](https://forums.speedlife.net/t/sr-swap-in-progress/84972/4 "2005-04-12T21:20:06Z")

</div>

just for future notice bud, usually for the clutch just take the 2 14s off the slave on the tranny and that way you dont have to rebleed the clutch line 😃

---

<div class="post-metadata">

**Author:** ![koz](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/koz/32/5478_2.png) [@koz](https://forums.speedlife.net/u/koz)\
**Post date:** [April 13, 2005, 8:17pm UTC](https://forums.speedlife.net/t/sr-swap-in-progress/84972/5 "2005-04-13T20:17:51Z")

</div>

^^^ that way worked out much better when I did the SR. ](\*,)