# SR20 Head Removal, inrelation to KA24 Head Removal

**URL:** <https://forums.speedlife.net/t/sr20-head-removal-inrelation-to-ka24-head-removal/145742>\
**Category:** Canada Nissan Automotive\
**Created:** [January 30, 2007, 9:05pm UTC](https://forums.speedlife.net/t/sr20-head-removal-inrelation-to-ka24-head-removal/145742 "2007-01-30T21:05:07Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![lourens13](https://avatars.discourse-cdn.com/v4/letter/l/e19b73/32.png) [@lourens13](https://forums.speedlife.net/u/lourens13)\
**Post date:** [January 30, 2007, 9:05pm UTC](https://forums.speedlife.net/t/sr20-head-removal-inrelation-to-ka24-head-removal/145742/1 "2007-01-30T21:05:07Z")

</div>

I have the order that you’re supposed to remove the head bolts on a KA, but not the SR. I would imagine its the same, but…?

Iunno, just kinda wanted to get some confirmation from someone?

---

<div class="post-metadata">

**Author:** ![imported\_brian](https://avatars.discourse-cdn.com/v4/letter/i/b3f665/32.png) [@imported\_brian](https://forums.speedlife.net/u/imported_brian)\
**Post date:** [January 30, 2007, 9:08pm UTC](https://forums.speedlife.net/t/sr20-head-removal-inrelation-to-ka24-head-removal/145742/2 "2007-01-30T21:08:10Z")

</div>

I allwas start from the edges and work my way in…if [vancouver240.com](http://vancouver240.com) wasnt such a poorly hosted site I could tell you.

---

<div class="post-metadata">

**Author:** ![RS13](https://avatars.discourse-cdn.com/v4/letter/r/46a35a/32.png) [@RS13](https://forums.speedlife.net/u/RS13)\
**Post date:** [January 30, 2007, 9:45pm UTC](https://forums.speedlife.net/t/sr20-head-removal-inrelation-to-ka24-head-removal/145742/3 "2007-01-30T21:45:10Z")

</div>

Removal  
[![http://img440.imageshack.us/img440/245/removeai1.png](http://img440.imageshack.us/img440/245/removeai1.png)](http://imageshack.us)  
Install  
[![http://img250.imageshack.us/img250/6462/installi3.png](http://img250.imageshack.us/img250/6462/installi3.png)](http://imageshack.us)

If you want the SR FSM look here

[http://www.n-e-c-c.com/forum/viewtopic.php?t=1312](http://www.n-e-c-c.com/forum/viewtopic.php?t=1312)

The s15 (easier to use) one is what i use but for the ignition side use the S14 (as it is the same as the S13)

---

<div class="post-metadata">

**Author:** ![95Integra](https://avatars.discourse-cdn.com/v4/letter/9/958977/32.png) [@95Integra](https://forums.speedlife.net/u/95Integra)\
**Post date:** [February 2, 2007, 2:31pm UTC](https://forums.speedlife.net/t/sr20-head-removal-inrelation-to-ka24-head-removal/145742/4 "2007-02-02T14:31:30Z")

</div>

Whenever you tighten any manifold or the head down, you should start from the inside out. Opposite for when you remove something. 🙂