# Sr20det Build Project

**URL:** <https://forums.speedlife.net/t/sr20det-build-project/229823>\
**Category:** Classifieds\
**Created:** [April 7, 2013, 9:54am UTC](https://forums.speedlife.net/t/sr20det-build-project/229823 "2013-04-07T09:54:16Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![brentjj](https://avatars.discourse-cdn.com/v4/letter/b/ecb155/32.png) [@brentjj](https://forums.speedlife.net/u/brentjj)\
**Post date:** [April 7, 2013, 9:54am UTC](https://forums.speedlife.net/t/sr20det-build-project/229823/1 "2013-04-07T09:54:16Z")

</div>

I have an sr20det swap that I’ve been collecting for the last 2 years. I was planning on making a 400+ build out of this thing but I’d rather put the money in to my VG right now. I started this project with just a short block and put together a longblock from it, minus intercooler/intake plumbing, wiring and ecu. Transmission is included. I have 2 different blocks, 1 is clean and comes with oem pistons, the other block had a melted piston and needs hone. This is the block I was planning on using, over bore and new forged pistons and you’re on you way to 400+. The crank shaft was purchased brand new online and has under 200 kilometers on it. There is also a t25 turbo with manifold kicking around some where that can be included if wanted. transmission and 810cc injectors will come with it as well.

I have documentation for every purchase that I have made for this engine wth names, prices and phone numbers written down in a book. All parts are individually wrapped, labeled and are stored in totes in a heated climate controlled room. All bearing surfaces were grease coated before being wrapped to prevent any oxidization. because of how I have stored every thing I have not included pictures. Lets be real, I’m not goign to cut open over 600 individually wrapped parts for some pictures, but if some shows some serious interest I will pull every thing out.

I have spent almost $2000, ($1924.63 to be exact) on putting this together. I’d rather focus on one engine build at a time and I’m running out of room to keep things too, so cash talks here. Make an offer.

Text is best, 2eight9-440-4044. Located in Hamilton.

Thanks for reading, Brent.

---

<div class="post-metadata">

**Author:** ![brentjj](https://avatars.discourse-cdn.com/v4/letter/b/ecb155/32.png) [@brentjj](https://forums.speedlife.net/u/brentjj)\
**Post date:** [May 12, 2013, 3:14pm UTC](https://forums.speedlife.net/t/sr20det-build-project/229823/2 "2013-05-12T15:14:44Z")

</div>

Still available. Really need the space. Best offer? Looking to sell quick.

---

<div class="post-metadata">

**Author:** ![Irff](https://avatars.discourse-cdn.com/v4/letter/i/a3d4f5/32.png) [@Irff](https://forums.speedlife.net/u/Irff)\
**Post date:** [May 14, 2013, 12:25am UTC](https://forums.speedlife.net/t/sr20det-build-project/229823/3 "2013-05-14T00:25:42Z")

</div>

part with the t25?

---

<div class="post-metadata">

**Author:** ![1990supraman](https://avatars.discourse-cdn.com/v4/letter/1/ecccb3/32.png) [@1990supraman](https://forums.speedlife.net/u/1990supraman)\
**Post date:** [May 14, 2013, 7:13am UTC](https://forums.speedlife.net/t/sr20det-build-project/229823/4 "2013-05-14T07:13:04Z")

</div>

Excellent man to deal with here folks

---

<div class="post-metadata">

**Author:** ![brentjj](https://avatars.discourse-cdn.com/v4/letter/b/ecb155/32.png) [@brentjj](https://forums.speedlife.net/u/brentjj)\
**Post date:** [May 22, 2013, 1:22pm UTC](https://forums.speedlife.net/t/sr20det-build-project/229823/5 "2013-05-22T13:22:44Z")

</div>

- 
- 
- 

Bringing this up one more time before I put these blocks out for scrap alu. Not looking for much here, $7-800 range.

Text your offers - 2eight9-440-4044

> [@Irff](#):
>
> part with the t25?

Sorry, ran out of room, had to scrap it.

> [@1990supraman](#):
>
> Excellent man to deal with here folks

Thanks Tyler!