# SRBURG13's 240sx **URL:** \ **Category:** Builds\ **Created:** [April 5, 2004, 11:11pm UTC](https://forums.speedlife.net/t/srburg13s-240sx/137416 "2004-04-05T23:11:32Z")\ **Posts on this page:** 15\ **Page:** 4
**Author:** ![Slide](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/slide/32/3301_2.png) [@Slide](https://forums.speedlife.net/u/Slide)\ **Post date:** [December 30, 2004, 1:47am UTC](https://forums.speedlife.net/t/srburg13s-240sx/137416/61 "2004-12-30T01:47:05Z")
me ?! mmm i dont think so. I would remember a s13 like that and the owner if i met 🙂 you probably met scott ?! and he used to own the sileighty ?! ---
**Author:** ![TyPhOOn](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/typhoon/32/5800_2.png) [@TyPhOOn](https://forums.speedlife.net/u/TyPhOOn)\ **Post date:** [December 30, 2004, 9:06am UTC](https://forums.speedlife.net/t/srburg13s-240sx/137416/62 "2004-12-30T09:06:49Z")
shaved …ugh ---
**Author:** ![SRBURG13](https://avatars.discourse-cdn.com/v4/letter/s/9fc29f/32.png) [@SRBURG13](https://forums.speedlife.net/u/SRBURG13)\ **Post date:** [December 30, 2004, 10:40am UTC](https://forums.speedlife.net/t/srburg13s-240sx/137416/63 "2004-12-30T10:40:30Z")
> [@Slide](#): > > me ?! > > mmm i dont think so. I would remember a s13 like that and the owner if i met 🙂 > > you probably met scott ?! and he used to own the sileighty ?! OH, my bad, I’m thinking of someone else. Oops. ---
**Author:** ![TyPhOOn](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/typhoon/32/5800_2.png) [@TyPhOOn](https://forums.speedlife.net/u/TyPhOOn)\ **Post date:** [December 30, 2004, 2:01pm UTC](https://forums.speedlife.net/t/srburg13s-240sx/137416/64 "2004-12-30T14:01:26Z")
that other guy is andy I thin kyo uare talking about Aaron ---
**Author:** ![Slide](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/slide/32/3301_2.png) [@Slide](https://forums.speedlife.net/u/Slide)\ **Post date:** [December 30, 2004, 3:09pm UTC](https://forums.speedlife.net/t/srburg13s-240sx/137416/65 "2004-12-30T15:09:50Z")
> [@TyPhOOn](#): > > shaved …ugh now that u said ugh, maybe i like the spoiler ? mwa ha ha 😃 ---
**Author:** ![LeRenard](https://avatars.discourse-cdn.com/v4/letter/l/d78d45/32.png) [@LeRenard](https://forums.speedlife.net/u/LeRenard)\ **Post date:** [March 17, 2005, 7:57pm UTC](https://forums.speedlife.net/t/srburg13s-240sx/137416/66 "2005-03-17T19:57:39Z")
what did you do with the rebar behind your bumper, did you remove it or did you just cut the shit outta it to make it fit under the bumper and fmic? ---
**Author:** ![SRBURG13](https://avatars.discourse-cdn.com/v4/letter/s/9fc29f/32.png) [@SRBURG13](https://forums.speedlife.net/u/SRBURG13)\ **Post date:** [March 17, 2005, 8:02pm UTC](https://forums.speedlife.net/t/srburg13s-240sx/137416/67 "2005-03-17T20:02:58Z")
I pulled it off and cut it. See other topic. lol. ---
**Author:** ![LeRenard](https://avatars.discourse-cdn.com/v4/letter/l/d78d45/32.png) [@LeRenard](https://forums.speedlife.net/u/LeRenard)\ **Post date:** [March 17, 2005, 8:55pm UTC](https://forums.speedlife.net/t/srburg13s-240sx/137416/68 "2005-03-17T20:55:13Z")
nm ---
**Author:** ![LeRenard](https://avatars.discourse-cdn.com/v4/letter/l/d78d45/32.png) [@LeRenard](https://forums.speedlife.net/u/LeRenard)\ **Post date:** [March 18, 2005, 10:03am UTC](https://forums.speedlife.net/t/srburg13s-240sx/137416/69 "2005-03-18T10:03:40Z")
is your roof black, i can’t really see it in any of the pictures. if so that’s pretty cool, my roof is being painted black and the body is being painted 350z daytona blue. ---
**Author:** ![SRBURG13](https://avatars.discourse-cdn.com/v4/letter/s/9fc29f/32.png) [@SRBURG13](https://forums.speedlife.net/u/SRBURG13)\ **Post date:** [March 18, 2005, 10:12am UTC](https://forums.speedlife.net/t/srburg13s-240sx/137416/70 "2005-03-18T10:12:32Z")
Yes, it is black. ---
**Author:** ![SRBURG13](https://avatars.discourse-cdn.com/v4/letter/s/9fc29f/32.png) [@SRBURG13](https://forums.speedlife.net/u/SRBURG13)\ **Post date:** [August 7, 2006, 10:19am UTC](https://forums.speedlife.net/t/srburg13s-240sx/137416/71 "2006-08-07T10:19:09Z")
Well, as many of you may know, I popped the engine last September, and I have completed a rebuild of the engine. The problem was that I blew the rings on pistons 2 and 4. Rings went first, and then the top of piston #4 peeled off. This I think was the source of my lack of power. It’s all taken care of now. 😃 Here are a couple of photos. More to come when I can get them off my phone. haha. ![http://www.n-e-c-c.com/aaron/gt25r/cylinder4.JPG](http://www.n-e-c-c.com/aaron/gt25r/cylinder4.JPG) ![http://www.n-e-c-c.com/aaron/gt25r/Built1.jpg](http://www.n-e-c-c.com/aaron/gt25r/Built1.jpg) ![http://www.n-e-c-c.com/aaron/gt25r/Built2.jpg](http://www.n-e-c-c.com/aaron/gt25r/Built2.jpg) Inside: Eagle H-beam Rods JE Pistons 8.5:1 compression 87mm (1mm overbore) Clevite Main bearings Clevite Rod Bearings Clevite Thrust Bearings Polished crank Balanced Rotating assembly, including rods and pistons Decked Head and Block Valve cleanup jobby, new seats etc etc. Apparently it is now a 2.1L. So I guess SR21Det? lol Break-in was a real pain in the ass. I really wanted to mash on it, but had to wait 1000km. Finally made it there, and just got it tuned up a little bit better this week. It finally runs really strong, and holds nicely at 19psi. Scared to go any higher. lol. More tuning to come, and more pics to come. ---
**Author:** ![Invalid\_Zero](https://avatars.discourse-cdn.com/v4/letter/i/ecae2f/32.png) [@Invalid\_Zero](https://forums.speedlife.net/u/Invalid_Zero)\ **Post date:** [August 7, 2006, 8:21pm UTC](https://forums.speedlife.net/t/srburg13s-240sx/137416/72 "2006-08-07T20:21:48Z")
I thought you had to re-sleeve when you went anything bigger than 86.5mm pistons? Looks good though. Nothing like fresh hot tanked aluminum huh? Looks soo fresh. ---
**Author:** ![TylerH](https://avatars.discourse-cdn.com/v4/letter/t/f05b48/32.png) [@TylerH](https://forums.speedlife.net/u/TylerH)\ **Post date:** [August 7, 2006, 9:47pm UTC](https://forums.speedlife.net/t/srburg13s-240sx/137416/73 "2006-08-07T21:47:14Z")
Thanks for the spin Aaron…damn that thing can pull. Next time i’ll take you out, and it’ll be a little ricey yellow car with a snail under the hood 😉 ---
**Author:** ![SRBURG13](https://avatars.discourse-cdn.com/v4/letter/s/9fc29f/32.png) [@SRBURG13](https://forums.speedlife.net/u/SRBURG13)\ **Post date:** [August 8, 2006, 12:50am UTC](https://forums.speedlife.net/t/srburg13s-240sx/137416/74 "2006-08-08T00:50:29Z")
> [@2003specv](#): > > I thought you had to re-sleeve when you went anything bigger than 86.5mm pistons? > > Looks good though. Nothing like fresh hot tanked aluminum huh? Looks soo fresh. No, not at all. There are plenty of guys that run .050" overbores without problems. I’m currently at .040" overbore, which gives me some room to play. Plus, if the walls do cave, I’ll just have that much better of a story to tell 😉 ---
**Author:** ![SRBURG13](https://avatars.discourse-cdn.com/v4/letter/s/9fc29f/32.png) [@SRBURG13](https://forums.speedlife.net/u/SRBURG13)\ **Post date:** [August 8, 2006, 12:51am UTC](https://forums.speedlife.net/t/srburg13s-240sx/137416/75 "2006-08-08T00:51:47Z")
> [@TylerH](#): > > Thanks for the spin Aaron…damn that thing can pull. Next time i’ll take you out, and it’ll be a little ricey yellow car with a snail under the hood 😉 Anytime. I can’t wait to make sure these injectors are good to go, advance some timing, lean it out, and nail it. Sorry, but no Honda will be on this thing 😉 But I will be more than happy to come for a ride. lol. [Previous page](https://forums.speedlife.net/t/srburg13s-240sx/137416.md?page=3)