# stainless steal pipe and mandrel bends

**URL:** <https://forums.speedlife.net/t/stainless-steal-pipe-and-mandrel-bends/120342>\
**Category:** Classifieds\
**Created:** [December 4, 2008, 4:15am UTC](https://forums.speedlife.net/t/stainless-steal-pipe-and-mandrel-bends/120342 "2008-12-04T04:15:56Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![superstar](https://avatars.discourse-cdn.com/v4/letter/s/f4b2a3/32.png) [@superstar](https://forums.speedlife.net/u/superstar)\
**Post date:** [December 4, 2008, 4:15am UTC](https://forums.speedlife.net/t/stainless-steal-pipe-and-mandrel-bends/120342/1 "2008-12-04T04:15:56Z")

</div>

**Condition** : New **Location** : City, Province  
**Will Ship?** : N  
**Contact Info** : Send PM for contact details and to schedule a meet  
**Description** :i have an unlimited surpply ( this is not a group but )

stainless steel 304ss sch10 for exhaust or intercooler piping

3’’ 90 - $27

3’’ 45 - $24

3’’ pipe - $25 per ft (must buy at least 10 ft)

11/2’’ 90 - $14

11/2’’ 45 - $13

11/2’’ pipe - $15per ft (must buy at least 10ft)

can also get 2’’ pipe and fitting also can get reducing couplings to bump sizes up or down.

with these prices you can do a full 3’’ exhaust for about $300

please move to group buy section

---

<div class="post-metadata">

**Author:** ![Qred13](https://avatars.discourse-cdn.com/v4/letter/q/8c91f0/32.png) [@Qred13](https://forums.speedlife.net/u/Qred13)\
**Post date:** [December 4, 2008, 4:49am UTC](https://forums.speedlife.net/t/stainless-steal-pipe-and-mandrel-bends/120342/2 "2008-12-04T04:49:18Z")

</div>

Can you do mandrel bents? How much for 3’ SS 2.5’ pipe with two bends: one 90’ and one 45’?

---

<div class="post-metadata">

**Author:** ![superstar](https://avatars.discourse-cdn.com/v4/letter/s/f4b2a3/32.png) [@superstar](https://forums.speedlife.net/u/superstar)\
**Post date:** [December 4, 2008, 10:21am UTC](https://forums.speedlife.net/t/stainless-steal-pipe-and-mandrel-bends/120342/3 "2008-12-04T10:21:38Z")

</div>

it would cost

2.5’’ 90 - $24  
2.5"" 45 - $21  
2.5 pipe - $22 per ft must buy at least 10ft

---

<div class="post-metadata">

**Author:** ![GetARide](https://avatars.discourse-cdn.com/v4/letter/g/e495f1/32.png) [@GetARide](https://forums.speedlife.net/u/GetARide)\
**Post date:** [December 4, 2008, 1:10pm UTC](https://forums.speedlife.net/t/stainless-steal-pipe-and-mandrel-bends/120342/4 "2008-12-04T13:10:34Z")

</div>

do you even own a 240? Maybe you should introduce yourself first and become a vendor or something.

---

<div class="post-metadata">

**Author:** ![sidewayz240](https://avatars.discourse-cdn.com/v4/letter/s/e99b99/32.png) [@sidewayz240](https://forums.speedlife.net/u/sidewayz240)\
**Post date:** [December 4, 2008, 1:52pm UTC](https://forums.speedlife.net/t/stainless-steal-pipe-and-mandrel-bends/120342/5 "2008-12-04T13:52:27Z")

</div>

FYI, noyzboyz sells 10’ lengths of 3" Stainless piping for quite abit less then $250.

---

<div class="post-metadata">

**Author:** ![EviltoM](https://avatars.discourse-cdn.com/v4/letter/e/97f17d/32.png) [@EviltoM](https://forums.speedlife.net/u/EviltoM)\
**Post date:** [December 4, 2008, 10:14pm UTC](https://forums.speedlife.net/t/stainless-steal-pipe-and-mandrel-bends/120342/6 "2008-12-04T22:14:35Z")

</div>

uhhh sch 10 is fricken thick. Ive never heard of anyone using it for exhaust pipes or intercooler pipes. Maybe exhaust manifolds. I think your just confused about what you have. 16 gauge might be a little more suitable.