# stainless steel
**URL:** https://forums.speedlife.net/t/stainless-steel/197823
**Category:** Classifieds
**Created:** [June 3, 2008, 8:58pm UTC](https://forums.speedlife.net/t/stainless-steel/197823 "2008-06-03T20:58:09Z")
**Posts on this page:** 12
**Page:** 1
### Author:  [@daytdayt1](https://forums.speedlife.net/u/daytdayt1)
#### Post date: [June 3, 2008, 8:58pm UTC](https://forums.speedlife.net/t/stainless-steel/197823/1 "2008-06-03T20:58:09Z")
came across this today and figured i would see if anyone here was interested
have 2 sheets about 3by5 foot $50 a piece
and 2 table covers with front lip and a backsplash no table just covers 1 is about 2x4 $50 and the other is about 2x8 $80 will take exact measurements if anyone wants
---
### Author:  [@foz](https://forums.speedlife.net/u/foz)
#### Post date: [June 3, 2008, 10:34pm UTC](https://forums.speedlife.net/t/stainless-steel/197823/2 "2008-06-03T22:34:23Z")
how close to appliance grade finish is the sheet? I only need a section about 32ish by10-12ish inches…
---
### Author:  [@dyingwish](https://forums.speedlife.net/u/dyingwish)
#### Post date: [June 4, 2008, 7:48am UTC](https://forums.speedlife.net/t/stainless-steel/197823/3 "2008-06-04T07:48:24Z")
how thick?
---
### Author:  [@daytdayt1](https://forums.speedlife.net/u/daytdayt1)
#### Post date: [June 4, 2008, 7:53pm UTC](https://forums.speedlife.net/t/stainless-steel/197823/4 "2008-06-04T19:53:33Z")
they are all finished the 3x5 is polished like the stainless grills and the others look like a prep table in a restaraunt not as shiney
not sure about thickness maybe a 16th of an inch its pretty strong
had it in a 6 pickup bed and it hung over and never bent
---
### Author:  [@foz](https://forums.speedlife.net/u/foz)
#### Post date: [June 5, 2008, 12:24am UTC](https://forums.speedlife.net/t/stainless-steel/197823/5 "2008-06-05T00:24:56Z")
I’d like to split one with someone, since I would only need to take a foot off an end, leaving a 3x4… but if noone will split, then I’ll take a whole sheet…
---
### Author:  [@dyingwish](https://forums.speedlife.net/u/dyingwish)
#### Post date: [June 5, 2008, 3:09am UTC](https://forums.speedlife.net/t/stainless-steel/197823/6 "2008-06-05T03:09:26Z")
I would like a piece about 3 x 1 or so. Foz, I will go in on it with you if you like. Let me know
---
### Author:  [@foz](https://forums.speedlife.net/u/foz)
#### Post date: [June 5, 2008, 11:17am UTC](https://forums.speedlife.net/t/stainless-steel/197823/7 "2008-06-05T11:17:34Z")
Consider it done… we can just split it right down the middle (3x2.5 each) or find a third party… I already sent a pm to the op… w/ number and e-mail… I’m in the North hills and have a van we can put it in to pick it up, then meet and split it in 1/2…
---
### Author:  [@dyingwish](https://forums.speedlife.net/u/dyingwish)
#### Post date: [June 5, 2008, 11:21am UTC](https://forums.speedlife.net/t/stainless-steel/197823/8 "2008-06-05T11:21:45Z")
works for me.
---
### Author:  [@foz](https://forums.speedlife.net/u/foz)
#### Post date: [June 5, 2008, 11:29am UTC](https://forums.speedlife.net/t/stainless-steel/197823/9 "2008-06-05T11:29:50Z")
shibby!
daytdayt1, just waiting on you…
---
### Author:  [@daytdayt1](https://forums.speedlife.net/u/daytdayt1)
#### Post date: [June 11, 2008, 3:42pm UTC](https://forums.speedlife.net/t/stainless-steel/197823/10 "2008-06-11T15:42:06Z")
1 sold anyone else interested before i post on craigslist
---
### Author:  [@daytdayt1](https://forums.speedlife.net/u/daytdayt1)
#### Post date: [June 27, 2008, 9:59pm UTC](https://forums.speedlife.net/t/stainless-steel/197823/11 "2008-06-27T21:59:36Z")
any1 need this if not it all goes to scrap yard next week
make offers
---
### Author:  [@SP71Supra](https://forums.speedlife.net/u/SP71Supra)
#### Post date: [June 30, 2008, 5:39am UTC](https://forums.speedlife.net/t/stainless-steel/197823/12 "2008-06-30T05:39:38Z")
Pics?
[http://www.pittspeed.com/forums/showthread.php?t=34947](http://www.pittspeed.com/forums/showthread.php?t=34947)