# stainless turbo header

**URL:** https://forums.speedlife.net/t/stainless-turbo-header/181577
**Category:** PittSpeed Automotive
**Created:** [April 10, 2006, 8:29pm UTC](https://forums.speedlife.net/t/stainless-turbo-header/181577 "2006-04-10T20:29:19Z")
**Posts on this page:** 8
**Page:** 1

<div class="post-metadata">

### Author: ![Dominator](https://avatars.discourse-cdn.com/v4/letter/d/a4c791/32.png) [@Dominator](https://forums.speedlife.net/u/Dominator)
#### Post date: [April 10, 2006, 8:29pm UTC](https://forums.speedlife.net/t/stainless-turbo-header/181577/1 "2006-04-10T20:29:19Z")

</div>

Almost there. Close to equal leanth. Just have to trim em, merge, and curve up to the turbo.

90 Daytona by the way.

![http://img.photobucket.com/albums/v683/Jaycoop/shoppotos1216.jpg](http://img.photobucket.com/albums/v683/Jaycoop/shoppotos1216.jpg)  
 ![http://img.photobucket.com/albums/v683/Jaycoop/shoppotos1217.jpg](http://img.photobucket.com/albums/v683/Jaycoop/shoppotos1217.jpg)

---

<div class="post-metadata">

### Author: ![Quik](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/quik/32/5979_2.png) [@Quik](https://forums.speedlife.net/u/Quik)
#### Post date: [April 10, 2006, 8:32pm UTC](https://forums.speedlife.net/t/stainless-turbo-header/181577/2 "2006-04-10T20:32:53Z")

</div>

you suck like always

looking good

---

<div class="post-metadata">

### Author: ![A468Bu](https://avatars.discourse-cdn.com/v4/letter/a/278dde/32.png) [@A468Bu](https://forums.speedlife.net/u/A468Bu)
#### Post date: [April 10, 2006, 8:36pm UTC](https://forums.speedlife.net/t/stainless-turbo-header/181577/3 "2006-04-10T20:36:06Z")

</div>

I’m am going to need a new set soon. I’ll have to get in contact with you.

---

<div class="post-metadata">

### Author: ![Dominator](https://avatars.discourse-cdn.com/v4/letter/d/a4c791/32.png) [@Dominator](https://forums.speedlife.net/u/Dominator)
#### Post date: [April 10, 2006, 8:39pm UTC](https://forums.speedlife.net/t/stainless-turbo-header/181577/4 "2006-04-10T20:39:03Z")

</div>

> [@A468Bu](#):
>
> I’m am going to need a new set soon. I’ll have to get in contact with you.

Cool I hope you do.

To be honest with you that one is a quicky. If it was for a customer instead of my car I would have made the primary pipes fit into the flange and welded in from the back side, on the inside.

---

<div class="post-metadata">

### Author: ![Converted2LSX](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/converted2lsx/32/5962_2.png) [@Converted2LSX](https://forums.speedlife.net/u/Converted2LSX)
#### Post date: [April 10, 2006, 9:18pm UTC](https://forums.speedlife.net/t/stainless-turbo-header/181577/5 "2006-04-10T21:18:14Z")

</div>

I was wondering what you were building out of that when i seen it when I was down there with Kurt

---

<div class="post-metadata">

### Author: ![Jeff95TA](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jeff95ta/32/5935_2.png) [@Jeff95TA](https://forums.speedlife.net/u/Jeff95TA)
#### Post date: [April 11, 2006, 4:22am UTC](https://forums.speedlife.net/t/stainless-turbo-header/181577/6 "2006-04-11T04:22:08Z")

</div>

Nice. I’d like to make everything I own out of stainless steel.

---

<div class="post-metadata">

### Author: ![Pewter](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pewter/32/5936_2.png) [@Pewter](https://forums.speedlife.net/u/Pewter)
#### Post date: [April 11, 2006, 4:24am UTC](https://forums.speedlife.net/t/stainless-turbo-header/181577/7 "2006-04-11T04:24:28Z")

</div>

very nice

---

<div class="post-metadata">

### Author: ![The1SloR\_T](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/the1slor_t/32/5984_2.png) [@The1SloR\_T](https://forums.speedlife.net/u/The1SloR_T)
#### Post date: [April 13, 2006, 9:22am UTC](https://forums.speedlife.net/t/stainless-turbo-header/181577/8 "2006-04-13T09:22:40Z")

</div>

thats sick