# standard gurus. Throwout bearing?

**URL:** <https://forums.speedlife.net/t/standard-gurus-throwout-bearing/259287>\
**Category:** Shift518 Automotive\
**Created:** [July 6, 2011, 6:22pm UTC](https://forums.speedlife.net/t/standard-gurus-throwout-bearing/259287 "2011-07-06T18:22:26Z")\
**Posts on this page:** 1\
**Showing post:** 12

<div class="post-metadata">

**Author:** ![SSmokinn\_SS](https://avatars.discourse-cdn.com/v4/letter/s/ec9cab/32.png) [@SSmokinn\_SS](https://forums.speedlife.net/u/SSmokinn_SS)\
**Post date:** [July 6, 2011, 6:37pm UTC](https://forums.speedlife.net/t/standard-gurus-throwout-bearing/259287/12 "2011-07-06T18:37:40Z")

</div>

> [@Scrap or Donate?](https://forums.speedlife.net/t/scrap-or-donate/43681/5):
>
> If the clutch is heavier than stock and comes with a slave cylinder it does so for a reason. If you delete it from the kit you may find yourself blowing seals down the line on the stock slave cylinder due to excessive pressure.

I had a Ram powergrip HD clutch in the car to begin with which was rated for 600hp. Im upgrading to a diamond stage 3 which is a 6 puck rated at 700hp.

---

_[View the full topic](https://forums.speedlife.net/t/standard-gurus-throwout-bearing/259287)._