# standard gurus. Throwout bearing?

**URL:** <https://forums.speedlife.net/t/standard-gurus-throwout-bearing/259287>\
**Category:** Shift518 Automotive\
**Created:** [July 6, 2011, 6:22pm UTC](https://forums.speedlife.net/t/standard-gurus-throwout-bearing/259287 "2011-07-06T18:22:26Z")\
**Posts on this page:** 1\
**Showing post:** 56

<div class="post-metadata">

**Author:** ![Johawk](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/johawk/32/6284_2.png) [@Johawk](https://forums.speedlife.net/u/Johawk)\
**Post date:** [July 7, 2011, 4:14pm UTC](https://forums.speedlife.net/t/standard-gurus-throwout-bearing/259287/56 "2011-07-07T16:14:22Z")

</div>

> [@FS: desk top pc complete $250 with dvd burner](https://forums.speedlife.net/t/fs-desk-top-pc-complete-250-with-dvd-burner/43277/19):
>
> When you do the clutch, do the throwout and slave while you’re at it.
> 
> Throwout is a MUST.
> 
> Slave is optional, but recommended. I drove with a brand new slipping clutch for a YEAR and it was my slave the whole time.+
> 
> Also, inspect the fork for wear, it may need to be replaced as well. I had about 1/4" of material worn off mine where the throwout bearing rode on the fork.

No fork on this ride. Slave is a cylinder around the input shaft.

I used ARP flywheel bolts for my billet flywheel. Used blue loctite as well.

---

_[View the full topic](https://forums.speedlife.net/t/standard-gurus-throwout-bearing/259287)._