# Steelies won't fit?

**URL:** <https://forums.speedlife.net/t/steelies-wont-fit/80247>\
**Category:** SON240sx Automotive\
**Created:** [November 7, 2003, 3:06pm UTC](https://forums.speedlife.net/t/steelies-wont-fit/80247 "2003-11-07T15:06:13Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![khiz](https://avatars.discourse-cdn.com/v4/letter/k/2bfe46/32.png) [@khiz](https://forums.speedlife.net/u/khiz)\
**Post date:** [November 7, 2003, 3:06pm UTC](https://forums.speedlife.net/t/steelies-wont-fit/80247/1 "2003-11-07T15:06:13Z")

</div>

I got a set of winter tires w/steelies. the bolt pattern from what i was told was 4x114 so i put them on and all the holes match up but the rim doesn’t sit in properly. The hub in the middle is too big. So now i am stuck. Any suggestions on other steelies that would fit. thanks

---

<div class="post-metadata">

**Author:** ![MRWmotorsports](https://avatars.discourse-cdn.com/v4/letter/m/f14d63/32.png) [@MRWmotorsports](https://forums.speedlife.net/u/MRWmotorsports)\
**Post date:** [November 7, 2003, 3:21pm UTC](https://forums.speedlife.net/t/steelies-wont-fit/80247/2 "2003-11-07T15:21:50Z")

</div>

I believe that what he’s saying is that the bolt pattern is correct, but teh hole in teh center isn’t big enough. Nissan has a very g\big center hole…

I’ll bet thet the rims you got are from a Toyota. You have two options, find someone who can put the rims on a lathe and enlarge the hole, or get Nissan rims.

-Martin.

---

<div class="post-metadata">

**Author:** ![khiz](https://avatars.discourse-cdn.com/v4/letter/k/2bfe46/32.png) [@khiz](https://forums.speedlife.net/u/khiz)\
**Post date:** [November 7, 2003, 3:45pm UTC](https://forums.speedlife.net/t/steelies-wont-fit/80247/3 "2003-11-07T15:45:07Z")

</div>

yeah that is exactly it…these are toyota rims from an AE86. thanks for the help.