# STi in the STM House. **URL:** \ **Category:** Vendor Marketplace\ **Created:** [January 9, 2013, 11:02am UTC](https://forums.speedlife.net/t/sti-in-the-stm-house/228092 "2013-01-09T11:02:52Z")\ **Posts on this page:** 9\ **Page:** 3
**Author:** ![4g63girl](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/4g63girl/32/7483_2.png) [@4g63girl](https://forums.speedlife.net/u/4g63girl)\ **Post date:** [January 15, 2013, 1:29pm UTC](https://forums.speedlife.net/t/sti-in-the-stm-house/228092/41 "2013-01-15T13:29:49Z")
[The STM Rear Crash Bar.](http://www.streettunedmotorsports.com/parts/stm_sti_rear_crash_bar.htm) The STM Rear Crash Bar is designed to fit the 2006-2007 Subaru STi rear bumpers. Made in-house of 1 5/8" chromoly steel, finished with satin black enamel with new mounting hardware included. Weighs only 11.1 pounds vs the stock bar at 29.75 pounds. The Rear Crash Bar is a lightweight racing product designed to remove 18 pounds and help keep the rear of the car boxed in, while still offering a bit of protection. - No Drilling Nesessary for Mounting - Mounting Hardware Included - 1 5/8" Welded Chromoly - Weighs 11.1 pounds - Save 18 pounds! - Satin Black Finish - 2006-2007 STi - Made in the USA! ![http://www.streettunedmotorsports.com/z/stm_sti/stm_sti15.jpg](http://www.streettunedmotorsports.com/z/stm_sti/stm_sti15.jpg) ![http://www.streettunedmotorsports.com/z/stm_sti/stm_sti17.jpg](http://www.streettunedmotorsports.com/z/stm_sti/stm_sti17.jpg) ![http://www.streettunedmotorsports.com/z/stm_sti/stm_sti18.jpg](http://www.streettunedmotorsports.com/z/stm_sti/stm_sti18.jpg) ![http://www.streettunedmotorsports.com/z/stm_sti/stm_sti19.jpg](http://www.streettunedmotorsports.com/z/stm_sti/stm_sti19.jpg) ![http://www.streettunedmotorsports.com/z/stm_sti/stm_sti16.jpg](http://www.streettunedmotorsports.com/z/stm_sti/stm_sti16.jpg) ![http://www.streettunedmotorsports.com/z/stm_sti/stm_sti20.jpg](http://www.streettunedmotorsports.com/z/stm_sti/stm_sti20.jpg) ![http://www.streettunedmotorsports.com/z/stm_sti/stm_sti21.jpg](http://www.streettunedmotorsports.com/z/stm_sti/stm_sti21.jpg) ---
**Author:** ![4g63girl](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/4g63girl/32/7483_2.png) [@4g63girl](https://forums.speedlife.net/u/4g63girl)\ **Post date:** [January 18, 2013, 11:55am UTC](https://forums.speedlife.net/t/sti-in-the-stm-house/228092/42 "2013-01-18T11:55:32Z")
Next on the list… [The STM Aluminum Cat-Back Exhaust](http://www.streettunedmotorsports.com/parts/stm_subaru_wrx_sti_aluminum_cat_back_exhaust.htm) 9.25 pounds. Yeah. Stock Cat-Back weighs 31.5, so we are minus another 22.25 pounds. Looking good, Suby, looking good. ![http://www.streettunedmotorsports.com/parts/b/stm_subaru_wrx_sti_aluminum_cat_back_exhaust.jpg](http://www.streettunedmotorsports.com/parts/b/stm_subaru_wrx_sti_aluminum_cat_back_exhaust.jpg) ![http://www.streettunedmotorsports.com/parts/b/stm_subaru_wrx_sti_aluminum_cat_back_exhaust2.jpg](http://www.streettunedmotorsports.com/parts/b/stm_subaru_wrx_sti_aluminum_cat_back_exhaust2.jpg) ![http://www.streettunedmotorsports.com/parts/b/stm_subaru_wrx_sti_aluminum_cat_back_exhaust3.jpg](http://www.streettunedmotorsports.com/parts/b/stm_subaru_wrx_sti_aluminum_cat_back_exhaust3.jpg) ![http://www.streettunedmotorsports.com/parts/b/stm_subaru_wrx_sti_aluminum_cat_back_exhaust4.jpg](http://www.streettunedmotorsports.com/parts/b/stm_subaru_wrx_sti_aluminum_cat_back_exhaust4.jpg) ![http://www.streettunedmotorsports.com/parts/b/stm_subaru_wrx_sti_aluminum_cat_back_exhaust5.jpg](http://www.streettunedmotorsports.com/parts/b/stm_subaru_wrx_sti_aluminum_cat_back_exhaust5.jpg) ![http://www.streettunedmotorsports.com/parts/b/stm_subaru_wrx_sti_aluminum_cat_back_exhaust6.jpg](http://www.streettunedmotorsports.com/parts/b/stm_subaru_wrx_sti_aluminum_cat_back_exhaust6.jpg) ![http://www.streettunedmotorsports.com/parts/b/stm_subaru_wrx_sti_aluminum_cat_back_exhaust7.jpg](http://www.streettunedmotorsports.com/parts/b/stm_subaru_wrx_sti_aluminum_cat_back_exhaust7.jpg) ![http://www.streettunedmotorsports.com/parts/b/stm_subaru_wrx_sti_aluminum_cat_back_exhaust8.jpg](http://www.streettunedmotorsports.com/parts/b/stm_subaru_wrx_sti_aluminum_cat_back_exhaust8.jpg) ![http://www.streettunedmotorsports.com/parts/b/stm_subaru_wrx_sti_aluminum_cat_back_exhaust9.jpg](http://www.streettunedmotorsports.com/parts/b/stm_subaru_wrx_sti_aluminum_cat_back_exhaust9.jpg) ![http://www.streettunedmotorsports.com/parts/b/stm_subaru_wrx_sti_aluminum_cat_back_exhaust10.jpg](http://www.streettunedmotorsports.com/parts/b/stm_subaru_wrx_sti_aluminum_cat_back_exhaust10.jpg) The [STM Aluminum Cat-Back Exhaust](http://www.streettunedmotorsports.com/parts/stm_subaru_wrx_sti_aluminum_cat_back_exhaust.htm) is on our website and available for purchase if you’re interested. Fits 2002-2007 WRX & STi. Priced at $700. ---
**Author:** ![MOBOOST4U](https://avatars.discourse-cdn.com/v4/letter/m/f4b2a3/32.png) [@MOBOOST4U](https://forums.speedlife.net/u/MOBOOST4U)\ **Post date:** [January 18, 2013, 12:05pm UTC](https://forums.speedlife.net/t/sti-in-the-stm-house/228092/43 "2013-01-18T12:05:01Z")
Daayyuuum, that underside is clean for an 06!!! ---
**Author:** ![Saxon](https://avatars.discourse-cdn.com/v4/letter/s/59ef9b/32.png) [@Saxon](https://forums.speedlife.net/u/Saxon)\ **Post date:** [January 18, 2013, 2:39pm UTC](https://forums.speedlife.net/t/sti-in-the-stm-house/228092/44 "2013-01-18T14:39:47Z")
> [@cougarspeed](#): > > Suggestions on where to go/order? The only thing I looked at is acces port.(around $275 used IIRC) Would I nee that is STM tuned it? I have had my XT for over a year now but have honestly not really looked into the aftermarket. But I would always enjoy some more funtime power. just find someone with a tactrix cable and start with that, not sure if any of the tuners up there will street tune it, but i got mine tuned through [www.j-k-tuning.com](http://www.j-k-tuning.com) and he did a great job, couldnt believe the difference in power and gas mileage ---
**Author:** ![deebo](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/deebo/32/5218_2.png) [@deebo](https://forums.speedlife.net/u/deebo)\ **Post date:** [January 18, 2013, 2:41pm UTC](https://forums.speedlife.net/t/sti-in-the-stm-house/228092/45 "2013-01-18T14:41:29Z")
You guys could probably have this conversation in another thread… :lol: ---
**Author:** ![4g63girl](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/4g63girl/32/7483_2.png) [@4g63girl](https://forums.speedlife.net/u/4g63girl)\ **Post date:** [January 24, 2013, 9:51am UTC](https://forums.speedlife.net/t/sti-in-the-stm-house/228092/46 "2013-01-24T09:51:58Z")
Drop another 20 pounds? Why not. STM just released the Front Crash Bar for 06-07 STi Weighs only 6.95 pounds vs the stock bar at 26.85. [Click me](http://www.streettunedmotorsports.com/parts/stm_sti_front_crash_bar.htm) ![http://www.streettunedmotorsports.com/parts/b/stm_sti_front_crash_bar.jpg](http://www.streettunedmotorsports.com/parts/b/stm_sti_front_crash_bar.jpg) ![http://www.streettunedmotorsports.com/parts/b/stm_sti_front_crash_bar2.jpg](http://www.streettunedmotorsports.com/parts/b/stm_sti_front_crash_bar2.jpg) ![http://www.streettunedmotorsports.com/parts/b/stm_sti_front_crash_bar3.jpg](http://www.streettunedmotorsports.com/parts/b/stm_sti_front_crash_bar3.jpg) ![http://www.streettunedmotorsports.com/parts/b/stm_sti_front_crash_bar4.jpg](http://www.streettunedmotorsports.com/parts/b/stm_sti_front_crash_bar4.jpg) The STM Front Crash Bar is designed to fit the 2006-2007 Subaru STi front bumper. Made in-house of 1 5/8" chromoly steel, finished with satin black enamel with new mounting hardware included. Weighs only 6.95 pounds vs the stock bar at 26.85 pounds. The Front Crash Bar will remove almost 20 pounds! - No Drilling Nesessary for Mounting - Mounting Hardware Included - 1 5/8" Welded Chromoly - Weighs 6.95 pounds - Save 19.9 pounds! - Satin Black Finish - 2006-2007 STi - Made in the USA [Click for more info.](http://www.streettunedmotorsports.com/parts/stm_sti_front_crash_bar.htm) ---
**Author:** ![CW00EK](https://avatars.discourse-cdn.com/v4/letter/c/db5fbb/32.png) [@CW00EK](https://forums.speedlife.net/u/CW00EK)\ **Post date:** [January 24, 2013, 10:50am UTC](https://forums.speedlife.net/t/sti-in-the-stm-house/228092/47 "2013-01-24T10:50:54Z")
You guys should make that with an option for mounting a FMIC. Seems like this is a good option to not totally lose the crash bar and not block your front mount. ---
**Author:** ![Beck](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/beck/32/28683_2.png) [@Beck](https://forums.speedlife.net/u/Beck)\ **Post date:** [January 24, 2013, 11:28am UTC](https://forums.speedlife.net/t/sti-in-the-stm-house/228092/48 "2013-01-24T11:28:26Z")
If you guys need a GR sedan to fab any parts/exhaust for, let me know 😉 ---
**Author:** ![4g63girl](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/4g63girl/32/7483_2.png) [@4g63girl](https://forums.speedlife.net/u/4g63girl)\ **Post date:** [February 6, 2013, 12:28pm UTC](https://forums.speedlife.net/t/sti-in-the-stm-house/228092/49 "2013-02-06T12:28:12Z")
What is this!? What do we have here? ![http://www.streettunedmotorsports.com/parts/b/seibon_subaru_dry_carbon_fiber_trunk_06_07_wrx_sti.jpg](http://www.streettunedmotorsports.com/parts/b/seibon_subaru_dry_carbon_fiber_trunk_06_07_wrx_sti.jpg) ![http://www.streettunedmotorsports.com/parts/b/seibon_subaru_dry_carbon_fiber_trunk_06_07_wrx_sti2.jpg](http://www.streettunedmotorsports.com/parts/b/seibon_subaru_dry_carbon_fiber_trunk_06_07_wrx_sti2.jpg) I didn’t get it on a scale yet… but, DAMN. She light. [SEIBON DRY CARBON TRUNK | 06-07 WRX & STI | OEM STYLE](http://www.streettunedmotorsports.com/parts/seibon_subaru_dry_carbon_fiber_trunk_06_07_wrx_sti.htm) [Previous page](https://forums.speedlife.net/t/sti-in-the-stm-house/228092.md?page=2)