# sticky clutch pedal

**URL:** <https://forums.speedlife.net/t/sticky-clutch-pedal/214072>\
**Category:** SON240sx Automotive\
**Created:** [June 30, 2011, 5:34pm UTC](https://forums.speedlife.net/t/sticky-clutch-pedal/214072 "2011-06-30T17:34:17Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![accelr8](https://avatars.discourse-cdn.com/v4/letter/a/e99b99/32.png) [@accelr8](https://forums.speedlife.net/u/accelr8)\
**Post date:** [June 30, 2011, 5:34pm UTC](https://forums.speedlife.net/t/sticky-clutch-pedal/214072/1 "2011-06-30T17:34:17Z")

</div>

i was driving home from work today,and noticed lack of pressure from the clutch pedal.I had a hard time getting into 1st and second.tried bleeding my slave cylinder and still no luck. what do i do now?

---------- Post added at 12:34 AM ---------- Previous post was at 12:20 AM ----------

i can also throw it in any gear when the car is not on without having to step on the clutch

---

<div class="post-metadata">

**Author:** ![Datenshi](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/datenshi/32/5899_2.png) [@Datenshi](https://forums.speedlife.net/u/Datenshi)\
**Post date:** [July 1, 2011, 8:35pm UTC](https://forums.speedlife.net/t/sticky-clutch-pedal/214072/2 "2011-07-01T20:35:54Z")

</div>

Fucked up master cylinder? Only thing I can think of if its bled properly, and you’ve got a soft pedal. I think mine has same problem. Grinds and makes weird noises in 1st and reverse… pretty sure its my master as I bled the fuck outta the slave definitely no air in that bitch. \>\_\>

Oh… You can push any car into gear without pushing the clutch, depends how hard you push 😛

---

<div class="post-metadata">

**Author:** ![accelr8](https://avatars.discourse-cdn.com/v4/letter/a/e99b99/32.png) [@accelr8](https://forums.speedlife.net/u/accelr8)\
**Post date:** [July 3, 2011, 12:38pm UTC](https://forums.speedlife.net/t/sticky-clutch-pedal/214072/3 "2011-07-03T12:38:55Z")

</div>

clutch master cylinder was replaced.i will replace the slave cylinder.hope this solves it

---

<div class="post-metadata">

**Author:** ![accelr8](https://avatars.discourse-cdn.com/v4/letter/a/e99b99/32.png) [@accelr8](https://forums.speedlife.net/u/accelr8)\
**Post date:** [July 5, 2011, 4:12pm UTC](https://forums.speedlife.net/t/sticky-clutch-pedal/214072/4 "2011-07-05T16:12:30Z")

</div>

got new slave and master was new.still same problem.how did you bleed it ?

---

<div class="post-metadata">

**Author:** ![S13GG](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/s13gg/32/5506_2.png) [@S13GG](https://forums.speedlife.net/u/S13GG)\
**Post date:** [July 6, 2011, 4:45am UTC](https://forums.speedlife.net/t/sticky-clutch-pedal/214072/5 "2011-07-06T04:45:22Z")

</div>

did you bypass that little block? attached to the floor?

---

<div class="post-metadata">

**Author:** ![accelr8](https://avatars.discourse-cdn.com/v4/letter/a/e99b99/32.png) [@accelr8](https://forums.speedlife.net/u/accelr8)\
**Post date:** [July 6, 2011, 7:38am UTC](https://forums.speedlife.net/t/sticky-clutch-pedal/214072/6 "2011-07-06T07:38:15Z")

</div>

yeah.both lines that go into it were T’d together.basically i just got rid of that bitch ass block

---

<div class="post-metadata">

**Author:** ![sherlock](https://avatars.discourse-cdn.com/v4/letter/s/0ea827/32.png) [@sherlock](https://forums.speedlife.net/u/sherlock)\
**Post date:** [July 6, 2011, 8:06am UTC](https://forums.speedlife.net/t/sticky-clutch-pedal/214072/7 "2011-07-06T08:06:18Z")

</div>

you may have to adjust your clutch pedal, same issue i had in my skyline and that fixed it