# Stippy's 86' Trans Am **URL:** \ **Category:** Builds\ **Created:** [December 21, 2008, 9:03am UTC](https://forums.speedlife.net/t/stippys-86-trans-am/201168 "2008-12-21T09:03:48Z")\ **Posts on this page:** 1\ **Showing post:** 80
**Author:** ![Stippy17](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/stippy17/32/6053_2.png) [@Stippy17](https://forums.speedlife.net/u/Stippy17)\ **Post date:** [May 6, 2009, 7:58pm UTC](https://forums.speedlife.net/t/stippys-86-trans-am/201168/80 "2009-05-06T19:58:29Z")
> [@5.1 System Noise](https://forums.speedlife.net/t/5-1-system-noise/40276/14): > > Most mechanical pumps can be rotated to fit. Its the Edelbrock High Volume one, so hopefully it rotates. We were hoping it does, but were too busy to take a look at it to see if it would. After tonight we have done: Welded air tubes shut Headers stretched onto block 4 Qts Royal Purple Break-In oil added (3 left) B&M flywheel swapped on Motor sat and bolted down Art Carr Torque Converter put in TH400 Tranny put up in place and bolted to engine Speedo Converter bolted onto tranny Tranny mount installed Crossmember reinstalled Torque Arm bolted back in Spohn Driveshaft bolted in Champion Rad sat in place Im going to need a different starter because my OEM isnt going to work with this flexplate. Also need to run fuel lines, rad hoses, go through all the wiring of what I need/dont need and hook everything up, and a few more misc things. --- _[View the full topic](https://forums.speedlife.net/t/stippys-86-trans-am/201168)._