# STM now has a bead roller!!!

**URL:** https://forums.speedlife.net/t/stm-now-has-a-bead-roller/42571
**Category:** Vendor Marketplace
**Created:** [January 28, 2008, 11:27am UTC](https://forums.speedlife.net/t/stm-now-has-a-bead-roller/42571 "2008-01-28T11:27:22Z")
**Posts on this page:** 7
**Page:** 1

<div class="post-metadata">

### Author: ![Emery](https://avatars.discourse-cdn.com/v4/letter/e/c4cdca/32.png) [@Emery](https://forums.speedlife.net/u/Emery)
#### Post date: [January 28, 2008, 11:27am UTC](https://forums.speedlife.net/t/stm-now-has-a-bead-roller/42571/1 "2008-01-28T11:27:22Z")

</div>

We will do them for $6 each pipe end. Just stop by!  
 ![http://www.streettunedmotorsports.com/used/stm_bead_roller.jpg](http://www.streettunedmotorsports.com/used/stm_bead_roller.jpg)  
 ![http://www.streettunedmotorsports.com/used/stm_bead_roller2.jpg](http://www.streettunedmotorsports.com/used/stm_bead_roller2.jpg)

---

<div class="post-metadata">

### Author: ![turbo\_ls1\_ss](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/turbo_ls1_ss/32/7303_2.png) [@turbo\_ls1\_ss](https://forums.speedlife.net/u/turbo_ls1_ss)
#### Post date: [January 28, 2008, 3:26pm UTC](https://forums.speedlife.net/t/stm-now-has-a-bead-roller/42571/2 "2008-01-28T15:26:47Z")

</div>

awesome. i might be seeing you if my other guy can’t for whatever reason. def need some stuff rolled 🙂

6 ends, (2) 3", (4) 3.5", all aluminum

---

<div class="post-metadata">

### Author: ![Geehee](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/geehee/32/7238_2.png) [@Geehee](https://forums.speedlife.net/u/Geehee)
#### Post date: [January 28, 2008, 4:07pm UTC](https://forums.speedlife.net/t/stm-now-has-a-bead-roller/42571/3 "2008-01-28T16:07:31Z")

</div>

advertiser?

---

<div class="post-metadata">

### Author: ![SoloIIscoob](https://avatars.discourse-cdn.com/v4/letter/s/35a633/32.png) [@SoloIIscoob](https://forums.speedlife.net/u/SoloIIscoob)
#### Post date: [January 28, 2008, 4:53pm UTC](https://forums.speedlife.net/t/stm-now-has-a-bead-roller/42571/4 "2008-01-28T16:53:25Z")

</div>

hott

---

<div class="post-metadata">

### Author: ![HydroStream6](https://avatars.discourse-cdn.com/v4/letter/h/8e8cbc/32.png) [@HydroStream6](https://forums.speedlife.net/u/HydroStream6)
#### Post date: [January 28, 2008, 5:15pm UTC](https://forums.speedlife.net/t/stm-now-has-a-bead-roller/42571/5 "2008-01-28T17:15:11Z")

</div>

> [@evolve](#):
>
> advertiser?

STM is listed as a sponsor under the “Sponsor” thread…

---

<div class="post-metadata">

### Author: ![Emery](https://avatars.discourse-cdn.com/v4/letter/e/c4cdca/32.png) [@Emery](https://forums.speedlife.net/u/Emery)
#### Post date: [January 28, 2008, 5:26pm UTC](https://forums.speedlife.net/t/stm-now-has-a-bead-roller/42571/6 "2008-01-28T17:26:20Z")

</div>

> [@turbo ls1 ss](#):
>
> awesome. i might be seeing you if my other guy can’t for whatever reason. def need some stuff rolled 🙂
> 
> 6 ends, (2) 3", (4) 3.5", all aluminum

Let us know… Not an issue for those.

---

<div class="post-metadata">

### Author: ![Geehee](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/geehee/32/7238_2.png) [@Geehee](https://forums.speedlife.net/u/Geehee)
#### Post date: [January 28, 2008, 5:58pm UTC](https://forums.speedlife.net/t/stm-now-has-a-bead-roller/42571/7 "2008-01-28T17:58:58Z")

</div>

> [@HydroStream6](#):
>
> STM is listed as a sponsor under the “Sponsor” thread…

:tup: