# STM now stocks CNC Staging Brakes!!!
**URL:** https://forums.speedlife.net/t/stm-now-stocks-cnc-staging-brakes/221742
**Category:** Vendor Marketplace
**Created:** [April 2, 2012, 7:43am UTC](https://forums.speedlife.net/t/stm-now-stocks-cnc-staging-brakes/221742 "2012-04-02T07:43:32Z")
**Posts on this page:** 3
**Page:** 1
### Author:  [@Justin\_at\_STM](https://forums.speedlife.net/u/Justin_at_STM)
#### Post date: [April 2, 2012, 7:43am UTC](https://forums.speedlife.net/t/stm-now-stocks-cnc-staging-brakes/221742/1 "2012-04-02T07:43:32Z")
**STM now stocks the CNC Series 412 Staging Brake.**
These are ready to ship!
[](http://www.streettunedmotorsports.com/parts/cnc_staging_brake.htm)
The CNC Staging Brake was engineered to be spliced into the brake line between the brake master cylinder and the rear brakes. The staging brake should be mounted LEVEL next to the driver. It is recommended that steel brake line be used for the entire system. The steel line should be clean and the entire brake system must be free from dirt.
The staging brake comes equipped with fittings for either standard American 3/16" inverted flare brake line or 10mm metric thread-bubble flare brake line.
**Features:**
- Total-seal rubber boots
- Straight Handle (Chrome)
- Does not affect or hinder foot brakes
[](http://www.streettunedmotorsports.com/parts/cnc_staging_brake.htm)
**You can purchase this part by [clicking right here!](http://www.streettunedmotorsports.com/parts/cnc_staging_brake.htm)**
As every product we off we can ship this to you for **$4**!
Questions or inquires please feel free to PM me pr call me at 585-226-8226!
As always thank you for your support!
-Justin
> **[STM Tuned Inc. | Performance Parts & Dyno Tuning](https://stmtuned.com/)**
>
> Quality parts & service for the Evo, DSM, R35 GTR, 3000GT, WRX, STi, Lamborghini Gallardo, Huracan and more! Schedule your dyno tune today! (585) 226-8226
---
### Author:  [@Justin\_at\_STM](https://forums.speedlife.net/u/Justin_at_STM)
#### Post date: [June 18, 2012, 7:39am UTC](https://forums.speedlife.net/t/stm-now-stocks-cnc-staging-brakes/221742/2 "2012-06-18T07:39:04Z")
Have some of these in stock! Give us a call at 585-226-8226 for this or any other part that you are looking for a great price!
-Justin
---
### Author:  [@Justin\_at\_STM](https://forums.speedlife.net/u/Justin_at_STM)
#### Post date: [September 20, 2012, 7:57am UTC](https://forums.speedlife.net/t/stm-now-stocks-cnc-staging-brakes/221742/3 "2012-09-20T07:57:38Z")
These are a great universal part for those that want to make a staging brake kit!