# Stock SR Elbow

**URL:** https://forums.speedlife.net/t/stock-sr-elbow/144019
**Category:** Canada Nissan Automotive
**Created:** [August 30, 2006, 3:45pm UTC](https://forums.speedlife.net/t/stock-sr-elbow/144019 "2006-08-30T15:45:28Z")
**Posts on this page:** 5
**Page:** 1

<div class="post-metadata">

### Author: ![SRS\_3](https://avatars.discourse-cdn.com/v4/letter/s/ecae2f/32.png) [@SRS\_3](https://forums.speedlife.net/u/SRS_3)
#### Post date: [August 30, 2006, 3:45pm UTC](https://forums.speedlife.net/t/stock-sr-elbow/144019/1 "2006-08-30T15:45:28Z")

</div>

just wondering what you guys used to plug the hole on the stock sr turbo elbow. i went to edmonton nut and they said they didn’t have anything that would work… wha do u guys think would work?

---

<div class="post-metadata">

### Author: ![imported\_silvia](https://avatars.discourse-cdn.com/v4/letter/i/e79b87/32.png) [@imported\_silvia](https://forums.speedlife.net/u/imported_silvia)
#### Post date: [August 30, 2006, 6:10pm UTC](https://forums.speedlife.net/t/stock-sr-elbow/144019/2 "2006-08-30T18:10:28Z")

</div>

my aftermarket elbow came with a bolt in the O2 sensor hole, it was the perfect size. however I lost it when I installed it. but maybe someone else will have one of these kicking around if thats what you need?

---

<div class="post-metadata">

### Author: ![RS13](https://avatars.discourse-cdn.com/v4/letter/r/46a35a/32.png) [@RS13](https://forums.speedlife.net/u/RS13)
#### Post date: [August 30, 2006, 6:11pm UTC](https://forums.speedlife.net/t/stock-sr-elbow/144019/3 "2006-08-30T18:11:58Z")

</div>

Weld a penny over it. It will only cost you 1 cent.

---

<div class="post-metadata">

### Author: ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)
#### Post date: [August 31, 2006, 9:55am UTC](https://forums.speedlife.net/t/stock-sr-elbow/144019/4 "2006-08-31T09:55:32Z")

</div>

1.10  
an american penny would be funner

real copper too 🙂

---

<div class="post-metadata">

### Author: ![jdms13rhd](https://avatars.discourse-cdn.com/v4/letter/j/f05b48/32.png) [@jdms13rhd](https://forums.speedlife.net/u/jdms13rhd)
#### Post date: [August 31, 2006, 12:20pm UTC](https://forums.speedlife.net/t/stock-sr-elbow/144019/5 "2006-08-31T12:20:38Z")

</div>

pennies just melt. I tried quarters and dimes too. I tryed to weld Robs like 2 years ago with change from my pocket and it didnt work. I went to an irrigation shop and used a pipe cap on mine after we did robs. I had to tap it and it was a waist of time. Spend the money and get the aftermarket one or just go to Canadian tire and throw a gob of JB weld in it.