# Stoopid exhaust

**URL:** <https://forums.speedlife.net/t/stoopid-exhaust/144047>\
**Category:** Canada Nissan Automotive\
**Created:** [September 1, 2006, 9:27am UTC](https://forums.speedlife.net/t/stoopid-exhaust/144047 "2006-09-01T09:27:12Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![Cavey](https://avatars.discourse-cdn.com/v4/letter/c/ecb155/32.png) [@Cavey](https://forums.speedlife.net/u/Cavey)\
**Post date:** [September 1, 2006, 9:27am UTC](https://forums.speedlife.net/t/stoopid-exhaust/144047/1 "2006-09-01T09:27:12Z")

</div>

Actually I am the retard who put it on. The tip doesn’t come out past the bumper far enough and it’s all burned and melted above the exhaust tip. Any1 have a time machine so I can go back and do it over again? :butthead:

---

<div class="post-metadata">

**Author:** ![MrRage](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/mrrage/32/5804_2.png) [@MrRage](https://forums.speedlife.net/u/MrRage)\
**Post date:** [September 1, 2006, 9:33am UTC](https://forums.speedlife.net/t/stoopid-exhaust/144047/2 "2006-09-01T09:33:33Z")

</div>

Sorry Man… Mr Fusion is down… But if you can find some plutonium I can do somthing… But really I didn’t know the spec v’s exhaust was that warm. On mine there is about 4mm of space between mine and it’s never melted it.

---

<div class="post-metadata">

**Author:** ![Cavey](https://avatars.discourse-cdn.com/v4/letter/c/ecb155/32.png) [@Cavey](https://forums.speedlife.net/u/Cavey)\
**Post date:** [September 1, 2006, 9:43am UTC](https://forums.speedlife.net/t/stoopid-exhaust/144047/3 "2006-09-01T09:43:09Z")

</div>

My car is just such a hot performance machine is all. :E

---

<div class="post-metadata">

**Author:** ![Cavey](https://avatars.discourse-cdn.com/v4/letter/c/ecb155/32.png) [@Cavey](https://forums.speedlife.net/u/Cavey)\
**Post date:** [September 1, 2006, 11:10am UTC](https://forums.speedlife.net/t/stoopid-exhaust/144047/4 "2006-09-01T11:10:55Z")

</div>

[![http://img1.putfile.com/thumb/9/24314075995.jpg](http://img1.putfile.com/thumb/9/24314075995.jpg)](http://www.putfile.com/pic.php?img=3299775)

---

<div class="post-metadata">

**Author:** ![Cavey](https://avatars.discourse-cdn.com/v4/letter/c/ecb155/32.png) [@Cavey](https://forums.speedlife.net/u/Cavey)\
**Post date:** [September 1, 2006, 1:50pm UTC](https://forums.speedlife.net/t/stoopid-exhaust/144047/5 "2006-09-01T13:50:01Z")

</div>

'm going to grab a sawzall and cut that out. :E

---

<div class="post-metadata">

**Author:** ![Doozer](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/doozer/32/5818_2.png) [@Doozer](https://forums.speedlife.net/u/Doozer)\
**Post date:** [September 1, 2006, 3:08pm UTC](https://forums.speedlife.net/t/stoopid-exhaust/144047/6 "2006-09-01T15:08:58Z")

</div>

Holy crap. Good luck with that.

I haven’t checked on my Altima, but on my old Integra I could drive from Calgary to Red Deer and put my hand straight on the muffler after the trip. It would be barely lukewarm.

---

<div class="post-metadata">

**Author:** ![PyreXXX](https://avatars.discourse-cdn.com/v4/letter/p/bbe5ce/32.png) [@PyreXXX](https://forums.speedlife.net/u/PyreXXX)\
**Post date:** [September 1, 2006, 3:21pm UTC](https://forums.speedlife.net/t/stoopid-exhaust/144047/7 "2006-09-01T15:21:12Z")

</div>

Wow…that’s crazy! You would think the GReddy Evo exhaust fartcan would do that too, but I haven’t noticed any excessive heat there! Ouch man, although you can always make your car look more JDM by attaching a polished square metal bit there to act as a heat shield! 😃

---

<div class="post-metadata">

**Author:** ![Cavey](https://avatars.discourse-cdn.com/v4/letter/c/ecb155/32.png) [@Cavey](https://forums.speedlife.net/u/Cavey)\
**Post date:** [September 1, 2006, 3:30pm UTC](https://forums.speedlife.net/t/stoopid-exhaust/144047/8 "2006-09-01T15:30:20Z")

</div>

That started after I installed the header. With the stocker on it didn’t do that.