# Strut tower repair

**URL:** <https://forums.speedlife.net/t/strut-tower-repair/115379>\
**Category:** SON240sx Automotive\
**Created:** [May 9, 2008, 4:25pm UTC](https://forums.speedlife.net/t/strut-tower-repair/115379 "2008-05-09T16:25:34Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Kyle](https://avatars.discourse-cdn.com/v4/letter/k/848f3c/32.png) [@Kyle](https://forums.speedlife.net/u/Kyle)\
**Post date:** [May 9, 2008, 4:25pm UTC](https://forums.speedlife.net/t/strut-tower-repair/115379/1 "2008-05-09T16:25:34Z")

</div>

found a guy. close thread please.

---

<div class="post-metadata">

**Author:** ![frankduxx](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/frankduxx/32/5647_2.png) [@frankduxx](https://forums.speedlife.net/u/frankduxx)\
**Post date:** [May 9, 2008, 4:56pm UTC](https://forums.speedlife.net/t/strut-tower-repair/115379/2 "2008-05-09T16:56:20Z")

</div>

?

---

<div class="post-metadata">

**Author:** ![Gatecrasher3](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/gatecrasher3/32/5617_2.png) [@Gatecrasher3](https://forums.speedlife.net/u/Gatecrasher3)\
**Post date:** [May 9, 2008, 5:46pm UTC](https://forums.speedlife.net/t/strut-tower-repair/115379/3 "2008-05-09T17:46:21Z")

</div>

if it cant be saved I will buy your coilovers.  
just kidding…or am i?

there are not to many good places in burlington (im in burl also), so you might need to branch out to miss or bramp area.

---

<div class="post-metadata">

**Author:** ![Osad](https://avatars.discourse-cdn.com/v4/letter/o/3ab097/32.png) [@Osad](https://forums.speedlife.net/u/Osad)\
**Post date:** [May 9, 2008, 6:29pm UTC](https://forums.speedlife.net/t/strut-tower-repair/115379/4 "2008-05-09T18:29:33Z")

</div>

Doesn’t look too bad to be honest with you. I saw remove your fenders  
pry off that top plate that joins the strut tower and the wheel well and see what ur lookin at. Most of the time, It’s just that top plate that is rotted.

The easiest fix to tell any welder to do, is to run a bead between the gap then weld a new plate over it.

Good luck man.

---

<div class="post-metadata">

**Author:** ![Kyle](https://avatars.discourse-cdn.com/v4/letter/k/848f3c/32.png) [@Kyle](https://forums.speedlife.net/u/Kyle)\
**Post date:** [May 9, 2008, 11:58pm UTC](https://forums.speedlife.net/t/strut-tower-repair/115379/5 "2008-05-09T23:58:24Z")

</div>

thanks for quick response. close thread please.