# stuff i don't want **URL:** \ **Category:** Classifieds\ **Created:** [February 1, 2009, 3:47pm UTC](https://forums.speedlife.net/t/stuff-i-dont-want/121530 "2009-02-01T15:47:46Z")\ **Posts on this page:** 12\ **Page:** 1
**Author:** ![CRXsi2NR](https://avatars.discourse-cdn.com/v4/letter/c/9de0a6/32.png) [@CRXsi2NR](https://forums.speedlife.net/u/CRXsi2NR)\ **Post date:** [February 1, 2009, 3:47pm UTC](https://forums.speedlife.net/t/stuff-i-dont-want/121530/1 "2009-02-01T15:47:46Z")
$20 - 91 Front brakes with rotors , 25% pads left and earl’s stainless brake lines (new) , both calipers are in working order , rotors are pretty done . $10 - 180sx climate control , no sensors or harness , seen it work , no scratch’s or sticky buttons $50 - Bings 3" exhaust used for 4 months , kind of rusty but nothing too bad , muffler needs to be replaced 4" tip and muffler are crushed ,was thinking of turning into track exhaust with no muffler at all but no more need $20 - N60 Maf get more power from your sr/ka turbo setup , by playing with a safc to correct fuel , more air aloud to flow into compressor housing , i have (4) of these $20 - Greddy grey faced , manual oil pressure gauge , with tee fitting for the stock oil pressure switch $10 - Greddy boost gauge , grey faced gauge , no lighting , $20 - Apex-i turbo timer , no directions on how to install, shop would be able to find out ---
**Author:** ![tatti](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/tatti/32/5742_2.png) [@tatti](https://forums.speedlife.net/u/tatti)\ **Post date:** [February 1, 2009, 3:52pm UTC](https://forums.speedlife.net/t/stuff-i-dont-want/121530/2 "2009-02-01T15:52:00Z")
hey, interested in the turbo timer, where abouts in hamilton are you? shoot me a PM ---
**Author:** ![CRXsi2NR](https://avatars.discourse-cdn.com/v4/letter/c/9de0a6/32.png) [@CRXsi2NR](https://forums.speedlife.net/u/CRXsi2NR)\ **Post date:** [February 1, 2009, 4:10pm UTC](https://forums.speedlife.net/t/stuff-i-dont-want/121530/3 "2009-02-01T16:10:05Z")
adding , 91 -94 Ka24de nkk clutch kit , never used , no pilot bearing , no through out bearing , just clutch and pressure plate , i will through in a stock ka resurfaced flywheel for free $100 ---
**Author:** ![XSNRGE](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/xsnrge/32/5565_2.png) [@XSNRGE](https://forums.speedlife.net/u/XSNRGE)\ **Post date:** [February 1, 2009, 5:11pm UTC](https://forums.speedlife.net/t/stuff-i-dont-want/121530/4 "2009-02-01T17:11:38Z")
GReddy oil press. gauge - Is it 52mm / 2-1/16"? Is everything needed to install included? Pics? ---
**Author:** ![CRXsi2NR](https://avatars.discourse-cdn.com/v4/letter/c/9de0a6/32.png) [@CRXsi2NR](https://forums.speedlife.net/u/CRXsi2NR)\ **Post date:** [February 1, 2009, 5:33pm UTC](https://forums.speedlife.net/t/stuff-i-dont-want/121530/5 "2009-02-01T17:33:43Z")
ALL the gauges are 52 mm and yes u take out the stock oil pressure switch right beside the oil filter and install brass tee , no pics of any of this cause, really its cheap enough and i’m negotiable ---
**Author:** ![danbikes](https://avatars.discourse-cdn.com/v4/letter/d/f9ae1b/32.png) [@danbikes](https://forums.speedlife.net/u/danbikes)\ **Post date:** [February 2, 2009, 9:28am UTC](https://forums.speedlife.net/t/stuff-i-dont-want/121530/6 "2009-02-02T09:28:10Z")
Do any of the N60 MAF’s have pigtails? hows the condition of them, i.e. anything broken? ---
**Author:** ![sil8t](https://avatars.discourse-cdn.com/v4/letter/s/ea666f/32.png) [@sil8t](https://forums.speedlife.net/u/sil8t)\ **Post date:** [February 2, 2009, 9:52am UTC](https://forums.speedlife.net/t/stuff-i-dont-want/121530/7 "2009-02-02T09:52:08Z")
hey ill take the exh. oil gauge, if it has the line too, and the maf. im located in hamilton aswell pm me ur number and ill pick em up ---
**Author:** ![CRXsi2NR](https://avatars.discourse-cdn.com/v4/letter/c/9de0a6/32.png) [@CRXsi2NR](https://forums.speedlife.net/u/CRXsi2NR)\ **Post date:** [February 2, 2009, 2:58pm UTC](https://forums.speedlife.net/t/stuff-i-dont-want/121530/8 "2009-02-02T14:58:25Z")
earl’s lines gone , 91 brakes for free who needs working brakes peace ---
**Author:** ![Dj-Infinit](https://avatars.discourse-cdn.com/v4/letter/d/7cd45c/32.png) [@Dj-Infinit](https://forums.speedlife.net/u/Dj-Infinit)\ **Post date:** [February 2, 2009, 3:38pm UTC](https://forums.speedlife.net/t/stuff-i-dont-want/121530/9 "2009-02-02T15:38:45Z")
catback for s13 or s14? ---
**Author:** ![CRXsi2NR](https://avatars.discourse-cdn.com/v4/letter/c/9de0a6/32.png) [@CRXsi2NR](https://forums.speedlife.net/u/CRXsi2NR)\ **Post date:** [February 2, 2009, 3:49pm UTC](https://forums.speedlife.net/t/stuff-i-dont-want/121530/10 "2009-02-02T15:49:10Z")
S13 ka or sr , sad too inform the gauges are autometer not greddy ---
**Author:** ![craz\_azn](https://avatars.discourse-cdn.com/v4/letter/c/90db22/32.png) [@craz\_azn](https://forums.speedlife.net/u/craz_azn)\ **Post date:** [February 2, 2009, 4:12pm UTC](https://forums.speedlife.net/t/stuff-i-dont-want/121530/11 "2009-02-02T16:12:17Z")
Do you have pics of the exhaust? ---
**Author:** ![CRXsi2NR](https://avatars.discourse-cdn.com/v4/letter/c/9de0a6/32.png) [@CRXsi2NR](https://forums.speedlife.net/u/CRXsi2NR)\ **Post date:** [February 3, 2009, 4:21am UTC](https://forums.speedlife.net/t/stuff-i-dont-want/121530/12 "2009-02-03T04:21:47Z")
exhaust gone and turbo timer thanks