# Sully's 93' VR-4 Build
**URL:** https://forums.speedlife.net/t/sullys-93-vr-4-build/241199
**Category:** Builds
**Created:** [January 5, 2009, 1:35pm UTC](https://forums.speedlife.net/t/sullys-93-vr-4-build/241199 "2009-01-05T13:35:38Z")
**Posts on this page:** 20
**Page:** 64
### Author:  [@Sully93vr4](https://forums.speedlife.net/u/Sully93vr4)
#### Post date: [April 27, 2010, 7:02pm UTC](https://forums.speedlife.net/t/sullys-93-vr-4-build/241199/1261 "2010-04-27T19:02:10Z")
> [@On another topic](https://forums.speedlife.net/t/31447/17):
>
> Pretty sure ARP also has tq specs for 30 weight motor oil, but as Brett suggested, a good parts store should have moly.
Called them and got the new specs with 30wt. 🙂
> [@chris beniot and family found dead](https://forums.speedlife.net/t/chris-beniot-and-family-found-dead/31463/8):
>
> I have a ring compressor if you still need one.
Bought one, $12 🙂
-I have the bottom end back together and the oil pan on. I’m in the process of putting the heads on now, But I need a torque wrench that can do 115ftlb, mine only goes up to 75ftlb… :Idiots
---
### Author:  [@Murrdog9000](https://forums.speedlife.net/u/Murrdog9000)
#### Post date: [April 27, 2010, 7:03pm UTC](https://forums.speedlife.net/t/sullys-93-vr-4-build/241199/1262 "2010-04-27T19:03:55Z")
Mcsully doin work
---
### Author:  [@TurboTravis](https://forums.speedlife.net/u/TurboTravis)
#### Post date: [April 27, 2010, 7:05pm UTC](https://forums.speedlife.net/t/sullys-93-vr-4-build/241199/1263 "2010-04-27T19:05:01Z")
> [@chris beniot and family found dead](https://forums.speedlife.net/t/chris-beniot-and-family-found-dead/31463/11):
>
> Called them and got the new specs with 30wt. 🙂
>
> Bought one, $12 🙂
>
> -I have the bottom end back together and the oil pan on. I’m in the process of putting the heads on now, But I need a torque wrench that can do 115ftlb, mine only goes up to 75ftlb… :Idiots
Good work with the call, and do yourself a favor and get a good quality tq wrench that can be recalibrated if needed. Checking ebay for a Snap-On or Mac would be a good place to start.
---
### Author:  [@Sully93vr4](https://forums.speedlife.net/u/Sully93vr4)
#### Post date: [April 28, 2010, 8:40am UTC](https://forums.speedlife.net/t/sullys-93-vr-4-build/241199/1264 "2010-04-28T08:40:40Z")
Bottom end is done, Heads are done and torqued down, Exhaust manis are on.
Making decent progress, But Brett found a broken “finger” on my clutch pressure plate last night, so I dunno whats going to happen with that now. fml.
---
### Author:  [@Boost\_Creep](https://forums.speedlife.net/u/Boost_Creep)
#### Post date: [April 28, 2010, 8:42am UTC](https://forums.speedlife.net/t/sullys-93-vr-4-build/241199/1265 "2010-04-28T08:42:56Z")
Sully pants, Sully pants.
---
### Author:  [@Sully93vr4](https://forums.speedlife.net/u/Sully93vr4)
#### Post date: [April 28, 2010, 8:44am UTC](https://forums.speedlife.net/t/sullys-93-vr-4-build/241199/1266 "2010-04-28T08:44:05Z")
Shut it BRYAN.
---
### Author:  [@zee\_oh\_sex](https://forums.speedlife.net/u/zee_oh_sex)
#### Post date: [April 28, 2010, 8:46am UTC](https://forums.speedlife.net/t/sullys-93-vr-4-build/241199/1267 "2010-04-28T08:46:00Z")
this will be walked by my vette
---
### Author:  [@Mike3](https://forums.speedlife.net/u/Mike3)
#### Post date: [April 28, 2010, 9:38am UTC](https://forums.speedlife.net/t/sullys-93-vr-4-build/241199/1268 "2010-04-28T09:38:08Z")
> [@Win $10k for your ride](https://forums.speedlife.net/t/win-10k-for-your-ride/30764/31):
>
> this will be walked by my vette
Obviously this shit ain’t ever runnin again
---
### Author:  [@zee\_oh\_sex](https://forums.speedlife.net/u/zee_oh_sex)
#### Post date: [April 28, 2010, 9:42am UTC](https://forums.speedlife.net/t/sullys-93-vr-4-build/241199/1269 "2010-04-28T09:42:52Z")
> [@2 recent cycle crashes](https://forums.speedlife.net/t/2-recent-cycle-crashes/31481/2):
>
> Obviously this shit ain’t ever runnin again
:rofl :+1
---
### Author:  [@Boost\_Creep](https://forums.speedlife.net/u/Boost_Creep)
#### Post date: [April 28, 2010, 10:20am UTC](https://forums.speedlife.net/t/sullys-93-vr-4-build/241199/1270 "2010-04-28T10:20:22Z")
> [@FLR Autocross @ Seneca Army Depot 6/24](https://forums.speedlife.net/t/flr-autocross-seneca-army-depot-6-24/31215/31):
>
> Shut it BRYAN.
đź‘Ź'(
---
### Author:  [@94Gt5.0](https://forums.speedlife.net/u/94Gt5.0)
#### Post date: [April 28, 2010, 10:21am UTC](https://forums.speedlife.net/t/sullys-93-vr-4-build/241199/1271 "2010-04-28T10:21:54Z")
I might hafta slap mine back together just to walk this piece on motor again! :rofl
:hug
---
### Author:  [@Boost\_Creep](https://forums.speedlife.net/u/Boost_Creep)
#### Post date: [April 28, 2010, 10:23am UTC](https://forums.speedlife.net/t/sullys-93-vr-4-build/241199/1272 "2010-04-28T10:23:51Z")
I’ll pull the turbz off and run em!!!
---
### Author:  [@GermanPSI](https://forums.speedlife.net/u/GermanPSI)
#### Post date: [April 28, 2010, 10:32am UTC](https://forums.speedlife.net/t/sullys-93-vr-4-build/241199/1273 "2010-04-28T10:32:42Z")
> [@Why you shouldn't buy no-name tires (recall)](https://forums.speedlife.net/t/why-you-shouldnt-buy-no-name-tires-recall/31483/3):
>
> Making decent progress, But Brett found a broken “finger” on my clutch pressure plate last night, so I dunno whats going to happen with that now. fml.
Southbend is JUNK
---
### Author:  [@psi2high](https://forums.speedlife.net/u/psi2high)
#### Post date: [April 28, 2010, 11:14am UTC](https://forums.speedlife.net/t/sullys-93-vr-4-build/241199/1274 "2010-04-28T11:14:16Z")
Send the clutch back and raise hell my friend
---
### Author:  [@Sully93vr4](https://forums.speedlife.net/u/Sully93vr4)
#### Post date: [April 28, 2010, 11:17am UTC](https://forums.speedlife.net/t/sullys-93-vr-4-build/241199/1275 "2010-04-28T11:17:26Z")
> [@On another topic](https://forums.speedlife.net/t/29846/292):
>
> Send the clutch back and raise hell my friend
I’m about to call them now.
I’m wondering if this is the reason whhy the car didn’t want to shift at high rpm last year. If all the “fingers” dont get pushed in, there will still be some friction on the clutch===\> therefore grinding??
---
### Author:  [@zee\_oh\_sex](https://forums.speedlife.net/u/zee_oh_sex)
#### Post date: [April 28, 2010, 11:19am UTC](https://forums.speedlife.net/t/sullys-93-vr-4-build/241199/1276 "2010-04-28T11:19:09Z")
thats possible sully, but you really think one finger would do it? theres quite a few others, i would think its something more than that.
---
### Author:  [@Sully93vr4](https://forums.speedlife.net/u/Sully93vr4)
#### Post date: [April 28, 2010, 11:22am UTC](https://forums.speedlife.net/t/sullys-93-vr-4-build/241199/1277 "2010-04-28T11:22:44Z")
Well, its possible. It’s a beefy pressure plate, so it could require more adjusting or a new slave cylinder…
I dunno. Either way, I need to get that clutch fixed.
---
### Author:  [@bennyfizzle](https://forums.speedlife.net/u/bennyfizzle)
#### Post date: [April 28, 2010, 11:26am UTC](https://forums.speedlife.net/t/sullys-93-vr-4-build/241199/1278 "2010-04-28T11:26:15Z")
What exactly is there to adjust in a hydro clutch??
---
### Author:  [@plaf713](https://forums.speedlife.net/u/plaf713)
#### Post date: [April 28, 2010, 11:26am UTC](https://forums.speedlife.net/t/sullys-93-vr-4-build/241199/1279 "2010-04-28T11:26:21Z")
hope this thing fucking runs in my lifetime, gluck sullivan
---
### Author:  [@Sully93vr4](https://forums.speedlife.net/u/Sully93vr4)
#### Post date: [April 28, 2010, 11:28am UTC](https://forums.speedlife.net/t/sullys-93-vr-4-build/241199/1280 "2010-04-28T11:28:00Z")
> [@chris beniot and family found dead](https://forums.speedlife.net/t/chris-beniot-and-family-found-dead/31463/49):
>
> What exactly is there to adjust in a hydro clutch??
Pedal adjustment… thats it
> [@On another topic](https://forums.speedlife.net/t/29846/293):
>
> hope this thing fucking runs in my lifetime, gluck sullivan
Don’t count on it.
[Previous page](https://forums.speedlife.net/t/sullys-93-vr-4-build/241199.md?page=63)
[Next page](https://forums.speedlife.net/t/sullys-93-vr-4-build/241199.md?page=65)