# summer specials on custom exhaust **URL:** \ **Category:** PittSpeed Automotive\ **Created:** [July 25, 2006, 8:03am UTC](https://forums.speedlife.net/t/summer-specials-on-custom-exhaust/183767 "2006-07-25T08:03:01Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![7.5hotrod](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/7.5hotrod/32/5993_2.png) [@7.5hotrod](https://forums.speedlife.net/u/7.5hotrod)\ **Post date:** [July 25, 2006, 8:03am UTC](https://forums.speedlife.net/t/summer-specials-on-custom-exhaust/183767/1 "2006-07-25T08:03:01Z")
i have super deals on custom exhaust, i can bend anything you want, and if you want mandrel, i can build it to suit your needs… - 2 & 4x4 trucks, duel exhaust w-s/s tips 350$ installed(flowmaster or magnaflow muffler) - axle backs for just about any 4/6cyl 200$ installed (magnaflow) - high flow cats, s/s magnaflow, 75$ + 50$ to install -724-737-5088 ---
**Author:** ![DTMVENG24](https://avatars.discourse-cdn.com/v4/letter/d/da6949/32.png) [@DTMVENG24](https://forums.speedlife.net/u/DTMVENG24)\ **Post date:** [July 25, 2006, 2:21pm UTC](https://forums.speedlife.net/t/summer-specials-on-custom-exhaust/183767/2 "2006-07-25T14:21:53Z")
Sounds like some good deals. Check your mail. ---
**Author:** ![yamaha](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/yamaha/32/5929_2.png) [@yamaha](https://forums.speedlife.net/u/yamaha)\ **Post date:** [July 25, 2006, 2:24pm UTC](https://forums.speedlife.net/t/summer-specials-on-custom-exhaust/183767/3 "2006-07-25T14:24:03Z")
Damn good deals, can you quote anything on after a downpipe with 2.5 piping and a cat, resonator and muffler I have? ---
**Author:** ![7.5hotrod](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/7.5hotrod/32/5993_2.png) [@7.5hotrod](https://forums.speedlife.net/u/7.5hotrod)\ **Post date:** [July 26, 2006, 5:40am UTC](https://forums.speedlife.net/t/summer-specials-on-custom-exhaust/183767/4 "2006-07-26T05:40:01Z")
> [@yamaha](#): > > Damn good deals, can you quote anything on after a downpipe with 2.5 piping and a cat, resonator and muffler I have? prob around 250$ out the door. ---
**Author:** ![Pewter](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pewter/32/5936_2.png) [@Pewter](https://forums.speedlife.net/u/Pewter)\ **Post date:** [July 26, 2006, 7:09am UTC](https://forums.speedlife.net/t/summer-specials-on-custom-exhaust/183767/5 "2006-07-26T07:09:08Z")
i may be down to see u! ---
**Author:** ![95V8TBird](https://avatars.discourse-cdn.com/v4/letter/9/a8b319/32.png) [@95V8TBird](https://forums.speedlife.net/u/95V8TBird)\ **Post date:** [July 26, 2006, 8:41pm UTC](https://forums.speedlife.net/t/summer-specials-on-custom-exhaust/183767/6 "2006-07-26T20:41:24Z")
I need a true dual cat back, with two new cats. I have a magnaflow di/do muffler. brand new, still in the box, and two stainless tips. I just need the 2.5" piping run, and the cats. What kind of price would I be looking at??? ---
**Author:** ![7.5hotrod](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/7.5hotrod/32/5993_2.png) [@7.5hotrod](https://forums.speedlife.net/u/7.5hotrod)\ **Post date:** [July 27, 2006, 7:04am UTC](https://forums.speedlife.net/t/summer-specials-on-custom-exhaust/183767/7 "2006-07-27T07:04:55Z")
> [@95V8TBird](#): > > I need a true dual cat back, with two new cats. I have a magnaflow di/do muffler. brand new, still in the box, and two stainless tips. I just need the 2.5" piping run, and the cats. What kind of price would I be looking at??? well, if you want it on the car in the pic, i have done a few t-birds with dual 2.5" and we had to run it straight under the gas tank, however one of the people is a really good friend of mine and i keep a good eye on it and he has had no problems at all, if you want this done please give me a call…the cats are 75$ each for high flows and the sticks are 20$ each so like prob 340$ plus tax… ---
**Author:** ![naeh2na](https://avatars.discourse-cdn.com/v4/letter/n/ed8c4c/32.png) [@naeh2na](https://forums.speedlife.net/u/naeh2na)\ **Post date:** [March 10, 2007, 7:59pm UTC](https://forums.speedlife.net/t/summer-specials-on-custom-exhaust/183767/8 "2007-03-10T19:59:16Z")
4" aluminium on a civic? ---
**Author:** ![7.5hotrod](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/7.5hotrod/32/5993_2.png) [@7.5hotrod](https://forums.speedlife.net/u/7.5hotrod)\ **Post date:** [March 11, 2007, 10:37pm UTC](https://forums.speedlife.net/t/summer-specials-on-custom-exhaust/183767/9 "2007-03-11T22:37:09Z")
> [@WTF internet?](https://forums.speedlife.net/t/wtf-internet/28479/236): > > 4" aluminium on a civic? i have no idea… if you are serious i will get you a price… ---
**Author:** ![Bravada\_442](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bravada_442/32/5982_2.png) [@Bravada\_442](https://forums.speedlife.net/u/Bravada_442)\ **Post date:** [March 12, 2007, 9:00am UTC](https://forums.speedlife.net/t/summer-specials-on-custom-exhaust/183767/10 "2007-03-12T09:00:13Z")
Just a general question for you, if you don’t mind. I’m going to be running an LT1 engine that requires o2 sensors. Where is a better place to have the bungs welded in, before the collector in the header or after the collector in the early part of the exhaust pipes? Also, what would you charge to weld in a couple of bungs for them? Thanks. ---
**Author:** ![Pewter](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pewter/32/5936_2.png) [@Pewter](https://forums.speedlife.net/u/Pewter)\ **Post date:** [March 12, 2007, 9:31am UTC](https://forums.speedlife.net/t/summer-specials-on-custom-exhaust/183767/11 "2007-03-12T09:31:29Z")
before the collector ---
**Author:** ![Jper](https://avatars.discourse-cdn.com/v4/letter/j/a3d4f5/32.png) [@Jper](https://forums.speedlife.net/u/Jper)\ **Post date:** [March 13, 2007, 9:05am UTC](https://forums.speedlife.net/t/summer-specials-on-custom-exhaust/183767/12 "2007-03-13T09:05:36Z")
Where are you located? ---
**Author:** ![Jeff95TA](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jeff95ta/32/5935_2.png) [@Jeff95TA](https://forums.speedlife.net/u/Jeff95TA)\ **Post date:** [March 13, 2007, 11:48am UTC](https://forums.speedlife.net/t/summer-specials-on-custom-exhaust/183767/13 "2007-03-13T11:48:54Z")
> [@FS: 2000 BLK/BLK Jetta glx vr6 5 speed](https://forums.speedlife.net/t/fs-2000-blk-blk-jetta-glx-vr6-5-speed/25748/24): > > Where are you located? Near Uniontown. [http://www.rodeheavershotrod.com/contact.html](http://www.rodeheavershotrod.com/contact.html) ---
**Author:** ![Jper](https://avatars.discourse-cdn.com/v4/letter/j/a3d4f5/32.png) [@Jper](https://forums.speedlife.net/u/Jper)\ **Post date:** [March 14, 2007, 5:47am UTC](https://forums.speedlife.net/t/summer-specials-on-custom-exhaust/183767/14 "2007-03-14T05:47:08Z")
Any pics of the magnaflow exhausts? I have a 97 sunfire. ---
**Author:** ![xlogic](https://avatars.discourse-cdn.com/v4/letter/x/59ef9b/32.png) [@xlogic](https://forums.speedlife.net/u/xlogic)\ **Post date:** [March 14, 2007, 4:34pm UTC](https://forums.speedlife.net/t/summer-specials-on-custom-exhaust/183767/15 "2007-03-14T16:34:09Z")
how much for a cat back 2.5" to a dual exhaust muffler on a neon? ---
**Author:** ![The1SloR\_T](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/the1slor_t/32/5984_2.png) [@The1SloR\_T](https://forums.speedlife.net/u/The1SloR_T)\ **Post date:** [March 14, 2007, 5:32pm UTC](https://forums.speedlife.net/t/summer-specials-on-custom-exhaust/183767/16 "2007-03-14T17:32:31Z")
> [@WTF internet?](https://forums.speedlife.net/t/wtf-internet/28479/236): > > 4" aluminium on a civic? :eek: a school bus exhaust??? ---
**Author:** ![Joker6](https://avatars.discourse-cdn.com/v4/letter/j/b38774/32.png) [@Joker6](https://forums.speedlife.net/u/Joker6)\ **Post date:** [March 15, 2007, 8:38pm UTC](https://forums.speedlife.net/t/summer-specials-on-custom-exhaust/183767/17 "2007-03-15T20:38:08Z")
Just wondering, how much for a Magnaflow on a 95 2wd pre-tacoma 4cyl? ---
**Author:** ![7.5hotrod](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/7.5hotrod/32/5993_2.png) [@7.5hotrod](https://forums.speedlife.net/u/7.5hotrod)\ **Post date:** [March 17, 2007, 10:16am UTC](https://forums.speedlife.net/t/summer-specials-on-custom-exhaust/183767/18 "2007-03-17T10:16:45Z")
> [@Bravada 442"](#): > > Just a general question for you, if you don’t mind. I’m going to be running an LT1 engine that requires o2 sensors. Where is a better place to have the bungs welded in, before the collector in the header or after the collector in the early part of the exhaust pipes? > > Also, what would you charge to weld in a couple of bungs for them? > > Thanks. 2 bungs would be like 45$ installed ---
**Author:** ![7.5hotrod](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/7.5hotrod/32/5993_2.png) [@7.5hotrod](https://forums.speedlife.net/u/7.5hotrod)\ **Post date:** [March 17, 2007, 10:17am UTC](https://forums.speedlife.net/t/summer-specials-on-custom-exhaust/183767/19 "2007-03-17T10:17:52Z")
> [@Gumball Fatality](https://forums.speedlife.net/t/gumball-fatality/28728/111): > > how much for a cat back 2.5" to a dual exhaust muffler on a neon? prob around 250$ installed ---
**Author:** ![7.5hotrod](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/7.5hotrod/32/5993_2.png) [@7.5hotrod](https://forums.speedlife.net/u/7.5hotrod)\ **Post date:** [March 17, 2007, 10:19am UTC](https://forums.speedlife.net/t/summer-specials-on-custom-exhaust/183767/20 "2007-03-17T10:19:08Z")
> [@I know I wasnt the coolest in jr. high but...](https://forums.speedlife.net/t/i-know-i-wasnt-the-coolest-in-jr-high-but/28782/15): > > Just wondering, how much for a Magnaflow on a 95 2wd pre-tacoma 4cyl? did you mean magna flow muffler or cat, the muffler would be like 175$ installed, and the cat would be like 120-150$ installed. [Next page](https://forums.speedlife.net/t/summer-specials-on-custom-exhaust/183767.md?page=2)