# Super-Beast The Tear Down **URL:** \ **Category:** SON240sx Automotive\ **Created:** [November 14, 2007, 10:06pm UTC](https://forums.speedlife.net/t/super-beast-the-tear-down/111088 "2007-11-14T22:06:12Z")\ **Posts on this page:** 13\ **Page:** 1
**Author:** ![vugi](https://avatars.discourse-cdn.com/v4/letter/v/c89c15/32.png) [@vugi](https://forums.speedlife.net/u/vugi)\ **Post date:** [November 14, 2007, 10:06pm UTC](https://forums.speedlife.net/t/super-beast-the-tear-down/111088/1 "2007-11-14T22:06:12Z")
Hey Guys I have started my project finally well its about time to get some real work done on the car. I have posted up some stuff on [240sx.org](http://240sx.org) about the project. Enjoy tips are always welcome. My goal with the car is to have a strong track drag and street ride come summer 08. Few Hints of whats to come Rb26Dett Build head and block hoping to run 15psi normal and 25on the dyno to see what the car can really do, Hks Coilovers, Big Brake Upgrade not sure what ones yet thou, New Seats and mabye a new paint job if this motor dosnt drain more the 15g ☹ Hope yah all enjoy tips are welcome. [http://forums.nicoclub.com/zerothread?id=292232](http://forums.nicoclub.com/zerothread?id=292232) Oh can anyone help me with my bumper here is the post Thanks [http://forums.nicoclub.com/zerothread?id=292571](http://forums.nicoclub.com/zerothread?id=292571) ---
**Author:** ![JamesS](https://avatars.discourse-cdn.com/v4/letter/j/87869e/32.png) [@JamesS](https://forums.speedlife.net/u/JamesS)\ **Post date:** [November 15, 2007, 4:05am UTC](https://forums.speedlife.net/t/super-beast-the-tear-down/111088/2 "2007-11-15T04:05:18Z")
Your from Stoney Creek too…I think I have seen your car around…I have the same lip as you. Good Luck! ---
**Author:** ![roast](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/roast/32/5498_2.png) [@roast](https://forums.speedlife.net/u/roast)\ **Post date:** [November 15, 2007, 5:35am UTC](https://forums.speedlife.net/t/super-beast-the-tear-down/111088/3 "2007-11-15T05:35:26Z")
> [@Sign The OTHER Anti Sabres Jersey Petition](https://forums.speedlife.net/t/sign-the-other-anti-sabres-jersey-petition/14590/14): > > Your from Stoney Creek too…I think I have seen your car around…I have the same lip as you. Good Luck! I speak for JamesS when I say, don’t forget to invite us over to see the build in progress! ---
**Author:** ![sil8t](https://avatars.discourse-cdn.com/v4/letter/s/ea666f/32.png) [@sil8t](https://forums.speedlife.net/u/sil8t)\ **Post date:** [November 15, 2007, 6:06am UTC](https://forums.speedlife.net/t/super-beast-the-tear-down/111088/4 "2007-11-15T06:06:04Z")
i sell u parts and this is how you thank me. i have to find out about it on here. geees so what are you doing with the ka??? i maybe interested in her sr needs a refresh ---
**Author:** ![\_RSTuning.ca](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/_rstuning.ca/32/6098_2.png) [@\_RSTuning.ca](https://forums.speedlife.net/u/_RSTuning.ca)\ **Post date:** [November 15, 2007, 9:26am UTC](https://forums.speedlife.net/t/super-beast-the-tear-down/111088/5 "2007-11-15T09:26:00Z")
Well at least my(now yours) nissan went to a good home. if you decide to sell the motor computer combo, i can help whoever uses the bikirom. let me know when you need help tuning the rb26det. ---
**Author:** ![vugi](https://avatars.discourse-cdn.com/v4/letter/v/c89c15/32.png) [@vugi](https://forums.speedlife.net/u/vugi)\ **Post date:** [November 15, 2007, 11:21am UTC](https://forums.speedlife.net/t/super-beast-the-tear-down/111088/6 "2007-11-15T11:21:42Z")
> [@Can someone please make me a SIG slight\_smile](https://forums.speedlife.net/t/can-someone-please-make-me-a-sig/14908/4): > > Well at least my(now yours) nissan went to a good home. > > if you decide to sell the motor computer combo, i can help whoever uses the bikirom. > > let me know when you need help tuning the rb26det. For Sure Man this is what i am thinking of getting for management [http://www.greddy.com/products/display/?Category=electronics&SubCategory=47](http://www.greddy.com/products/display/?Category=electronics&SubCategory=47) With The Ka-t I was thinking of building it and dropping it in a s13 for drift since there are plenty of them around at junkyard when i crash.😛 Now Dose anyone know how i would remove the undercoat on the bottom of the car i want to see and repair any rust then get it rhino Lined so it can last :). I will keep yah guys updated as work progress on the car. Thanks ---
**Author:** ![\_RSTuning.ca](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/_rstuning.ca/32/6098_2.png) [@\_RSTuning.ca](https://forums.speedlife.net/u/_RSTuning.ca)\ **Post date:** [November 15, 2007, 11:44am UTC](https://forums.speedlife.net/t/super-beast-the-tear-down/111088/7 "2007-11-15T11:44:04Z")
the best and only way would be to have the underbody sand blasted. for management, i can burn you a custom chip, ---
**Author:** ![vugi](https://avatars.discourse-cdn.com/v4/letter/v/c89c15/32.png) [@vugi](https://forums.speedlife.net/u/vugi)\ **Post date:** [November 15, 2007, 2:12pm UTC](https://forums.speedlife.net/t/super-beast-the-tear-down/111088/8 "2007-11-15T14:12:47Z")
I spent sometime calling around today about sandblasting. Got some quotes but this one guy i talked with said he has done about 5 240sx this year already.😛 “Ace Sandblast” is the placement i was wondering if anyone here has been there. But now i have to completely strip the car inside and out might as well do it all. Now should i cage the car full / half what do yah guys think? I do want to keep the interior thou i like it a lot. Thanks ---
**Author:** ![sidewayz240](https://avatars.discourse-cdn.com/v4/letter/s/e99b99/32.png) [@sidewayz240](https://forums.speedlife.net/u/sidewayz240)\ **Post date:** [November 15, 2007, 3:11pm UTC](https://forums.speedlife.net/t/super-beast-the-tear-down/111088/9 "2007-11-15T15:11:12Z")
Looks good so far, keep it up. Out of curiosity, what was the average quote to sandblast the underbody? ---
**Author:** ![vugi](https://avatars.discourse-cdn.com/v4/letter/v/c89c15/32.png) [@vugi](https://forums.speedlife.net/u/vugi)\ **Post date:** [November 15, 2007, 3:18pm UTC](https://forums.speedlife.net/t/super-beast-the-tear-down/111088/10 "2007-11-15T15:18:42Z")
> [@\*\*Official: LaserTron Go-Karts\*\*](https://forums.speedlife.net/t/official-lasertron-go-karts/14226/41): > > Looks good so far, keep it up. Out of curiosity, what was the average quote to sandblast the underbody? Under body + Engine Bay with 3 coats urethane primer was around 700 But that with you taking everything off motor, Suspension, Wiring, Fuel/Brake lines, Drive train and fuel tank. Not to bad for a brand new bottom pretty much. ---
**Author:** ![2fourti\_jordi](https://avatars.discourse-cdn.com/v4/letter/2/c37758/32.png) [@2fourti\_jordi](https://forums.speedlife.net/u/2fourti_jordi)\ **Post date:** [November 15, 2007, 3:34pm UTC](https://forums.speedlife.net/t/super-beast-the-tear-down/111088/11 "2007-11-15T15:34:54Z")
as for your bumper… i would find a scrap bumper(any car) cut peices for your wholes. ( jsut like welding in a rust repair patch) heat them with a heat gun to achieve the correct contour. then sand or grind to bare plastic on the patch and the bumper(leave a rough finish). get yourself some duramix or a 2part plastic repair adhesive. use the adhesive as a weld basically and glue your patches in… once they cure. you can do any filler work and prime that son bitch. or il come down there and steal it…lol j/p( i need a stock bumper) good luck with her bro. if u need any more info pm me. im a body man jord also i wouldnt suggest any sort of polyester resin or fiber glass on your bumper. ---
**Author:** ![vugi](https://avatars.discourse-cdn.com/v4/letter/v/c89c15/32.png) [@vugi](https://forums.speedlife.net/u/vugi)\ **Post date:** [November 15, 2007, 3:56pm UTC](https://forums.speedlife.net/t/super-beast-the-tear-down/111088/12 "2007-11-15T15:56:01Z")
> [@\*\*\*\*\*Official: Mighty Meet Thread\*\*\*\*\*](https://forums.speedlife.net/t/official-mighty-meet-thread/10918/485): > > as for your bumper… i would find a scrap bumper(any car) cut peices for your wholes. ( jsut like welding in a rust repair patch) heat them with a heat gun to achieve the correct contour. then sand or grind to bare plastic on the patch and the bumper(leave a rough finish). get yourself some duramix or a 2part plastic repair adhesive. use the adhesive as a weld basically and glue your patches in… once they cure. you can do any filler work and prime that son bitch. or il come down there and steal it…lol j/p( i need a stock bumper) > > good luck with her bro. > if u need any more info pm me. im a body man > > jord > > also i wouldnt suggest any sort of polyester resin or fiber glass on your bumper. Looks like am going to the scrap tomorrow and i will give it my best. Thanks for the help i will keep yah all posted. ---
**Author:** ![drunkmunky](https://avatars.discourse-cdn.com/v4/letter/d/fbc32d/32.png) [@drunkmunky](https://forums.speedlife.net/u/drunkmunky)\ **Post date:** [November 15, 2007, 8:12pm UTC](https://forums.speedlife.net/t/super-beast-the-tear-down/111088/13 "2007-11-15T20:12:57Z")
oh man… how much does that front lip weigh now? thank god i bought the urethane one.