# sway bay issues

**URL:** <https://forums.speedlife.net/t/sway-bay-issues/112421>\
**Category:** SON240sx Automotive\
**Created:** [January 13, 2008, 4:11pm UTC](https://forums.speedlife.net/t/sway-bay-issues/112421 "2008-01-13T16:11:03Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![CrypticNissan](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/crypticnissan/32/5663_2.png) [@CrypticNissan](https://forums.speedlife.net/u/CrypticNissan)\
**Post date:** [January 13, 2008, 4:11pm UTC](https://forums.speedlife.net/t/sway-bay-issues/112421/1 "2008-01-13T16:11:03Z")

</div>

hey guys got a problem.

my sway bar link nut is completly striped, its a bitch enough holding a wrench above it to stop it from moving when spinning, like i belive i used the proper wrench. but it stripped almost right away. now that links bottom half is snapped (thus needing a new one, the sway bar is dangling on the pass side-its still bolted to the car but that side is fucked) pics soon as i go out to the garage) i tried brake line wrenches(flare wrenches) no go, ill try with some lube and vicegrips/channel locks later. any ideas guys?  
(its still bolted prety good on the LCA if im not mistaken is were it is)

---

<div class="post-metadata">

**Author:** ![Pants](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pants/32/5590_2.png) [@Pants](https://forums.speedlife.net/u/Pants)\
**Post date:** [January 13, 2008, 6:27pm UTC](https://forums.speedlife.net/t/sway-bay-issues/112421/2 "2008-01-13T18:27:41Z")

</div>

cut it off and get new links

---

<div class="post-metadata">

**Author:** ![Theo23](https://avatars.discourse-cdn.com/v4/letter/t/43a26b/32.png) [@Theo23](https://forums.speedlife.net/u/Theo23)\
**Post date:** [January 13, 2008, 8:27pm UTC](https://forums.speedlife.net/t/sway-bay-issues/112421/3 "2008-01-13T20:27:36Z")

</div>

Bing sells end links with poly bushings in them.