# /testing water Fully built d series **URL:** \ **Category:** Classifieds\ **Created:** [September 8, 2009, 4:51pm UTC](https://forums.speedlife.net/t/testing-water-fully-built-d-series/73224 "2009-09-08T16:51:32Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![TikiHutCrew](https://avatars.discourse-cdn.com/v4/letter/t/e47774/32.png) [@TikiHutCrew](https://forums.speedlife.net/u/TikiHutCrew)\ **Post date:** [September 8, 2009, 4:51pm UTC](https://forums.speedlife.net/t/testing-water-fully-built-d-series/73224/1 "2009-09-08T16:51:32Z")
so out of sheer boredom while i am in college i built a mini me swap d series this is being sold as if it were a crate motor the motor is running at 13:1cr and comes w. obd1 harness and properly tuned ecu stage 2 clutch motor and trans out of a del sol si make an offer i will be getting it dynoed this week for horsepower and torque numbers ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\ **Post date:** [September 8, 2009, 5:01pm UTC](https://forums.speedlife.net/t/testing-water-fully-built-d-series/73224/2 "2009-09-08T17:01:51Z")
specs? pics? price? ---
**Author:** ![TikiHutCrew](https://avatars.discourse-cdn.com/v4/letter/t/e47774/32.png) [@TikiHutCrew](https://forums.speedlife.net/u/TikiHutCrew)\ **Post date:** [September 8, 2009, 5:12pm UTC](https://forums.speedlife.net/t/testing-water-fully-built-d-series/73224/3 "2009-09-08T17:12:32Z")
Sorry for the Shitty post im doing this all from my Fone cause i just moved and my house doesn’t have internet yet but we think its going to be running about 290-300hp to the wheels ill get pics up as soon as i have access to a computer and the price is all on reasonable offers ---
**Author:** ![TikiHutCrew](https://avatars.discourse-cdn.com/v4/letter/t/e47774/32.png) [@TikiHutCrew](https://forums.speedlife.net/u/TikiHutCrew)\ **Post date:** [September 8, 2009, 5:14pm UTC](https://forums.speedlife.net/t/testing-water-fully-built-d-series/73224/4 "2009-09-08T17:14:50Z")
I will no for sure the hp and torque specs in i few days when i dyno it ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\ **Post date:** [September 8, 2009, 5:18pm UTC](https://forums.speedlife.net/t/testing-water-fully-built-d-series/73224/5 "2009-09-08T17:18:27Z")
brand and extent of the aftermarket internals are going to be the $$ maker here. you probably want to add them in as much detail as possible. ---
**Author:** ![stmotorsports](https://avatars.discourse-cdn.com/v4/letter/s/bb73d2/32.png) [@stmotorsports](https://forums.speedlife.net/u/stmotorsports)\ **Post date:** [September 8, 2009, 7:56pm UTC](https://forums.speedlife.net/t/testing-water-fully-built-d-series/73224/6 "2009-09-08T19:56:07Z")
in for dyno printout ---
**Author:** ![lsvtechatch](https://avatars.discourse-cdn.com/v4/letter/l/e5b9ba/32.png) [@lsvtechatch](https://forums.speedlife.net/u/lsvtechatch)\ **Post date:** [September 8, 2009, 8:44pm UTC](https://forums.speedlife.net/t/testing-water-fully-built-d-series/73224/7 "2009-09-08T20:44:20Z")
did i miss something? a 300whp all motor d series?! ---
**Author:** ![luisitoR](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/luisitor/32/5135_2.png) [@luisitoR](https://forums.speedlife.net/u/luisitoR)\ **Post date:** [September 8, 2009, 8:57pm UTC](https://forums.speedlife.net/t/testing-water-fully-built-d-series/73224/8 "2009-09-08T20:57:34Z")
ill trade him for my ls/vtec so that i can put it in my integra… ---
**Author:** ![deebo](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/deebo/32/5218_2.png) [@deebo](https://forums.speedlife.net/u/deebo)\ **Post date:** [September 8, 2009, 9:02pm UTC](https://forums.speedlife.net/t/testing-water-fully-built-d-series/73224/9 "2009-09-08T21:02:21Z")
> [@lsvtechatch](#): > > did i miss something? a 300whp all motor d series?! there are 10 second all motor dseries cars out there ---
**Author:** ![lsvtechatch](https://avatars.discourse-cdn.com/v4/letter/l/e5b9ba/32.png) [@lsvtechatch](https://forums.speedlife.net/u/lsvtechatch)\ **Post date:** [September 8, 2009, 9:03pm UTC](https://forums.speedlife.net/t/testing-water-fully-built-d-series/73224/10 "2009-09-08T21:03:57Z")
> [@deebo](#): > > there are 10 second all motor dseries cars out there Thats suprising, t-up to that though. Details on this build would be nice. ---
**Author:** ![shocker911](https://avatars.discourse-cdn.com/v4/letter/s/c0e974/32.png) [@shocker911](https://forums.speedlife.net/u/shocker911)\ **Post date:** [September 9, 2009, 9:52am UTC](https://forums.speedlife.net/t/testing-water-fully-built-d-series/73224/11 "2009-09-09T09:52:46Z")
> [@deebo](#): > > there are 10 second all motor dseries cars out there SCRATCH that there is NO D-series 275+ single cam NA cars putting down that much power…christ B-series can barley do it with out so many mods…H2Bs do it off displacment and Ks do it as well…Bs can get there HARD TO DO…D’s can not do it. [D-series.org](http://D-series.org) is where i got all my information ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\ **Post date:** [September 9, 2009, 2:02pm UTC](https://forums.speedlife.net/t/testing-water-fully-built-d-series/73224/12 "2009-09-09T14:02:19Z")
> [@shocker911](#): > > SCRATCH that there is NO D-series 275+ single cam NA cars putting down that much power…christ B-series can barley do it with out so many mods…H2Bs do it off displacment and Ks do it as well…Bs can get there HARD TO DO…D’s can not do it. > > [D-series.org](http://D-series.org) is where i got all my information poor source LOL this motor won’t do it (NA mine-me) regaurdless of what modifications are done. Bisimoto ran 10’s with their d15 and then 9.4 with their carb’d SOHC F22 > 1988 CRX Unibody, D15 full race: > 10.77 @ 123mph > 2006 Insight Unibody, F22A: > 9.42, 150mph > source: > [http://www.bisimoto.net/cms/index.php?option=com\_content&view=article&id=46:bisimoto-dyno-tuning&catid=38:bisimoto-tuning&Itemid=57](http://www.bisimoto.net/cms/index.php?option=com_content&view=article&id=46:bisimoto-dyno-tuning&catid=38:bisimoto-tuning&Itemid=57) ---
**Author:** ![TikiHutCrew](https://avatars.discourse-cdn.com/v4/letter/t/e47774/32.png) [@TikiHutCrew](https://forums.speedlife.net/u/TikiHutCrew)\ **Post date:** [September 9, 2009, 2:03pm UTC](https://forums.speedlife.net/t/testing-water-fully-built-d-series/73224/13 "2009-09-09T14:03:38Z")
its all speculation for me til i get it on the dyno i was jus guessing ill get all the internals up tomorrow when i drive back to west seneca from cleveland ---
**Author:** ![shocker911](https://avatars.discourse-cdn.com/v4/letter/s/c0e974/32.png) [@shocker911](https://forums.speedlife.net/u/shocker911)\ **Post date:** [September 9, 2009, 2:13pm UTC](https://forums.speedlife.net/t/testing-water-fully-built-d-series/73224/14 "2009-09-09T14:13:53Z")
yes bissi used a F22 that is not a D-series MOTOR yes its a single came but NOT a D-series ---
**Author:** ![shocker911](https://avatars.discourse-cdn.com/v4/letter/s/c0e974/32.png) [@shocker911](https://forums.speedlife.net/u/shocker911)\ **Post date:** [September 9, 2009, 2:15pm UTC](https://forums.speedlife.net/t/testing-water-fully-built-d-series/73224/15 "2009-09-09T14:15:33Z")
ill ask the bishi tech that is on there about the D-series b/c he has already said that it is BS that there is a 300+D out there… him running 10’s dosent show that he had 300NA ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\ **Post date:** [September 9, 2009, 2:20pm UTC](https://forums.speedlife.net/t/testing-water-fully-built-d-series/73224/16 "2009-09-09T14:20:38Z")
> [@shocker911](#): > > ill ask the bishi tech that is on there about the D-series b/c he has already said that it is BS that there is a 300+D out there… him running 10’s dosent show that he had 300NA True… but a quick lookup in the chart shows that with 300hp vehicle weight would be around **1300 pounds** including driver to hit 10.5 sure charts are not always accurate to tenths, but shit that’s about 600 pounds under what the car/driver probably actually weighed. ---
**Author:** ![mindless](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/mindless/32/7286_2.png) [@mindless](https://forums.speedlife.net/u/mindless)\ **Post date:** [September 9, 2009, 2:24pm UTC](https://forums.speedlife.net/t/testing-water-fully-built-d-series/73224/17 "2009-09-09T14:24:11Z")
i dont see this motor breaking 200 whp ---
**Author:** ![Saxon](https://avatars.discourse-cdn.com/v4/letter/s/59ef9b/32.png) [@Saxon](https://forums.speedlife.net/u/Saxon)\ **Post date:** [September 9, 2009, 2:28pm UTC](https://forums.speedlife.net/t/testing-water-fully-built-d-series/73224/18 "2009-09-09T14:28:02Z")
no way in hell this D has more than 160whp IMO and if it hits that then thats pretty damn respectable imo good luck with the sale but… 300whp LMAO NO WAY, maybe 200chp im building a high compression K and thats my goals (pretty extensive build) seriously the highest whp 1.6L d i have seen put down high 180-190whp and it had custom built cams, header, race gas, pretty much one off everything ---
**Author:** ![shocker911](https://avatars.discourse-cdn.com/v4/letter/s/c0e974/32.png) [@shocker911](https://forums.speedlife.net/u/shocker911)\ **Post date:** [September 9, 2009, 2:30pm UTC](https://forums.speedlife.net/t/testing-water-fully-built-d-series/73224/19 "2009-09-09T14:30:08Z")
> [@mindless](#): > > i dont see this motor breaking 200 whp it wont…i have seen TONS of NA D’s that dont get to 200. if all you have is 13:1 pistons and rods you wont be anywhere near taht…you would need alot of head work and NASTY cam… but if you have what you think is a 300NA D get it dyno’d and put up the dyno sheet also bishis motor the D15 was a complete RACE motor 17:1 comp custom cams header head work beyond all head work by portflow ---
**Author:** ![luisitoR](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/luisitor/32/5135_2.png) [@luisitoR](https://forums.speedlife.net/u/luisitoR)\ **Post date:** [September 9, 2009, 4:20pm UTC](https://forums.speedlife.net/t/testing-water-fully-built-d-series/73224/20 "2009-09-09T16:20:46Z")
good info … > [@shocker911](#): > > it wont…i have seen TONS of NA D’s that dont get to 200. if all you have is 13:1 pistons and rods you wont be anywhere near taht…you would need alot of head work and NASTY cam… > > but if you have what you think is a 300NA D get it dyno’d and put up the dyno sheet > > also bishis motor the D15 was a complete RACE motor 17:1 comp custom cams header head work beyond all head work by portflow [Next page](https://forums.speedlife.net/t/testing-water-fully-built-d-series/73224.md?page=2)