# /testing water Fully built d series **URL:** \ **Category:** Classifieds\ **Created:** [September 8, 2009, 4:51pm UTC](https://forums.speedlife.net/t/testing-water-fully-built-d-series/73224 "2009-09-08T16:51:32Z")\ **Posts on this page:** 16\ **Page:** 2
**Author:** ![cfrat1](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/cfrat1/32/5315_2.png) [@cfrat1](https://forums.speedlife.net/u/cfrat1)\ **Post date:** [September 9, 2009, 9:48pm UTC](https://forums.speedlife.net/t/testing-water-fully-built-d-series/73224/21 "2009-09-09T21:48:18Z")
pics or ban ---
**Author:** ![boostedhatch](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/boostedhatch/32/5327_2.png) [@boostedhatch](https://forums.speedlife.net/u/boostedhatch)\ **Post date:** [September 10, 2009, 11:28am UTC](https://forums.speedlife.net/t/testing-water-fully-built-d-series/73224/22 "2009-09-10T11:28:49Z")
ive seen a fully built d series with p30 pistons, custom rods, head work, a bisimoto header put down a lil over 160whp and run 11’s…oh yea it was in a 4 door ---
**Author:** ![Saxon](https://avatars.discourse-cdn.com/v4/letter/s/59ef9b/32.png) [@Saxon](https://forums.speedlife.net/u/Saxon)\ **Post date:** [September 10, 2009, 12:45pm UTC](https://forums.speedlife.net/t/testing-water-fully-built-d-series/73224/23 "2009-09-10T12:45:02Z")
how do 81mm p30 pistons fit in a 75mm bore D series? ---
**Author:** ![BREETIME](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/breetime/32/5214_2.png) [@BREETIME](https://forums.speedlife.net/u/BREETIME)\ **Post date:** [September 10, 2009, 1:13pm UTC](https://forums.speedlife.net/t/testing-water-fully-built-d-series/73224/24 "2009-09-10T13:13:41Z")
> [@alpha earl](#): > > how do 81mm p30 pistons fit in a 75mm bore D series? i didnt want to say anything but…lol ---
**Author:** ![luisitoR](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/luisitor/32/5135_2.png) [@luisitoR](https://forums.speedlife.net/u/luisitoR)\ **Post date:** [September 10, 2009, 3:20pm UTC](https://forums.speedlife.net/t/testing-water-fully-built-d-series/73224/25 "2009-09-10T15:20:34Z")
some people think nyspeeders are dumb…lol ---
**Author:** ![cfrat1](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/cfrat1/32/5315_2.png) [@cfrat1](https://forums.speedlife.net/u/cfrat1)\ **Post date:** [September 10, 2009, 3:52pm UTC](https://forums.speedlife.net/t/testing-water-fully-built-d-series/73224/26 "2009-09-10T15:52:21Z")
> [@alpha earl](#): > > how do 81mm p30 pistons fit in a 75mm bore D series? he had them in there…i have him on myspace or something i dont remember but he barely had any cylinder wall i didnt think it would last but it did and ran pretty strong ---
**Author:** ![mindless](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/mindless/32/7286_2.png) [@mindless](https://forums.speedlife.net/u/mindless)\ **Post date:** [September 10, 2009, 3:58pm UTC](https://forums.speedlife.net/t/testing-water-fully-built-d-series/73224/27 "2009-09-10T15:58:10Z")
> [@luisitoR](#): > > some people think nyspeeders are dumb…lol Most of them are ---
**Author:** ![Saxon](https://avatars.discourse-cdn.com/v4/letter/s/59ef9b/32.png) [@Saxon](https://forums.speedlife.net/u/Saxon)\ **Post date:** [September 10, 2009, 9:03pm UTC](https://forums.speedlife.net/t/testing-water-fully-built-d-series/73224/28 "2009-09-10T21:03:12Z")
> [@cfrat1](#): > > he had them in there…i have him on myspace or something i dont remember but he barely had any cylinder wall i didnt think it would last but it did and ran pretty strong 81mm pistons in a 75mm bored (max with sleaves is 79mm) is not possible unless they had the pistons custom made in that size, even then for the amount of money spent there are much better pistons that bolt right in such as d16a1 pistons ---
**Author:** ![mindless](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/mindless/32/7286_2.png) [@mindless](https://forums.speedlife.net/u/mindless)\ **Post date:** [September 11, 2009, 7:16am UTC](https://forums.speedlife.net/t/testing-water-fully-built-d-series/73224/29 "2009-09-11T07:16:16Z")
> [@alpha earl](#): > > 81mm pistons in a 75mm bored (max with sleaves is 79mm) is not possible unless they had the pistons custom made in that size, even then for the amount of money spent there are much better pistons that bolt right in such as d16a1 pistons Dont be stupid they probably just machined down the pistons to fit… :rimshot: ---
**Author:** ![deebo](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/deebo/32/5218_2.png) [@deebo](https://forums.speedlife.net/u/deebo)\ **Post date:** [September 11, 2009, 7:23am UTC](https://forums.speedlife.net/t/testing-water-fully-built-d-series/73224/30 "2009-09-11T07:23:48Z")
great thread here :lol: ---
**Author:** ![Zer0DazE](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/zer0daze/32/7624_2.png) [@Zer0DazE](https://forums.speedlife.net/u/Zer0DazE)\ **Post date:** [September 11, 2009, 8:12am UTC](https://forums.speedlife.net/t/testing-water-fully-built-d-series/73224/31 "2009-09-11T08:12:55Z")
> [@alpha earl](#): > > how do 81mm p30 pistons fit in a 75mm bore D series? > [@alpha earl](#): > > 81mm pistons in a 75mm bored (max with sleaves is 79mm) is not possible unless they had the pistons custom made in that size, even then for the amount of money spent there are much better pistons that bolt right in such as d16a1 pistons It has been done in the past. I doubt any of you are old enough to have been on the old Endyn forums. It didn’t make 300whp, but it has been done. Bisi use to hang out on the sohc forums before the monstrosity that is the dseries forums came about. He ran a D series for a long time, and if memory serves, it was destroked to 1.4l, and had a pretty slick carb setup. Last I spoke with him, it was a F series with an adapter plate so he can continue using the D series trans. Anywho, if you aren’t posting dyno charts, then do not hit the “Submit Reply” button. You have all been warned. ---
**Author:** ![mindless](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/mindless/32/7286_2.png) [@mindless](https://forums.speedlife.net/u/mindless)\ **Post date:** [September 11, 2009, 5:34pm UTC](https://forums.speedlife.net/t/testing-water-fully-built-d-series/73224/32 "2009-09-11T17:34:31Z")
Bisi’s current set up: F22A1 17:1 COMPRESSION RATIO 420+ WHP BISIMOTO H2D/F2D KIT BISIMOTO VALVE SPRINGS BISIMOTO CAM GEAR BISIMOTO LEVEL X CAMSHAFT BISIMOTO HEADER BISIMOTO HEAT SHIELD GASKET BISIMOTO SPEC. ARIAS PISTONS SUPERTECH VALVES KINSLER 60mm ITB KINSLER MECHANICAL FUEL PUMP ALUMINUM PISTON ROD AEM EMS WITH COIL PLUGS AEM TWIN FIRE SPINWERKES WHEEL TOY0 SLICK TIRES ---
**Author:** ![shocker911](https://avatars.discourse-cdn.com/v4/letter/s/c0e974/32.png) [@shocker911](https://forums.speedlife.net/u/shocker911)\ **Post date:** [September 12, 2009, 2:06pm UTC](https://forums.speedlife.net/t/testing-water-fully-built-d-series/73224/33 "2009-09-12T14:06:00Z")
> [@boostedhatch](#): > > ive seen a fully built d series with p30 pistons, custom rods, head work, a bisimoto header put down a lil over 160whp and run 11’s…oh yea it was in a 4 door i have seen p29’s in a D15he is on my myspace he is in Seattle Wa. there was like no cylinder wall at all on the black here are P29s in a D15 note not much cylinder wall ---
**Author:** ![Saxon](https://avatars.discourse-cdn.com/v4/letter/s/59ef9b/32.png) [@Saxon](https://forums.speedlife.net/u/Saxon)\ **Post date:** [September 12, 2009, 2:57pm UTC](https://forums.speedlife.net/t/testing-water-fully-built-d-series/73224/34 "2009-09-12T14:57:36Z")
the p29 pistons are pistons from the d16a1 i was talking about, and they are made for the d series bore, thats plenty of cylinder wall, if you had an 81mm piston they would be about touching each other ---
**Author:** ![shocker911](https://avatars.discourse-cdn.com/v4/letter/s/c0e974/32.png) [@shocker911](https://forums.speedlife.net/u/shocker911)\ **Post date:** [September 12, 2009, 4:58pm UTC](https://forums.speedlife.net/t/testing-water-fully-built-d-series/73224/35 "2009-09-12T16:58:03Z")
yea i kno what you were talking about saxon…i think hodge was thinking of that since i showed him that picture 1 night ---
**Author:** ![Willybeen](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/willybeen/32/7351_2.png) [@Willybeen](https://forums.speedlife.net/u/Willybeen)\ **Post date:** [September 12, 2009, 5:02pm UTC](https://forums.speedlife.net/t/testing-water-fully-built-d-series/73224/36 "2009-09-12T17:02:37Z")
IN for results. [Previous page](https://forums.speedlife.net/t/testing-water-fully-built-d-series/73224.md?page=1)