# THe Barf is still good for a good laugh every now and then
**URL:** https://forums.speedlife.net/t/the-barf-is-still-good-for-a-good-laugh-every-now-and-then/702
**Category:** NYSpeed Automotive
**Created:** [July 9, 2005, 9:06pm UTC](https://forums.speedlife.net/t/the-barf-is-still-good-for-a-good-laugh-every-now-and-then/702 "2005-07-09T21:06:45Z")
**Posts on this page:** 19
**Page:** 1
### Author:  [@Locutus](https://forums.speedlife.net/u/Locutus)
#### Post date: [July 9, 2005, 9:06pm UTC](https://forums.speedlife.net/t/the-barf-is-still-good-for-a-good-laugh-every-now-and-then/702/1 "2005-07-09T21:06:45Z")
they say pictures are 1000 words
> [@ieatpaint315 on the barf](#):
>
> Just put on rear quarter rust repair panels. They fit well, everything is snug, and I riveted it on. My question is, do I really need to weld these in as well? Either way I’d have to use body filler right? Would you use those fiberglass sheets and the resin, then filler, or just use straight filler?
OMFG bahwbhbhwhwhwhwwhabhwhwahwhwhwhwhwhwh
---
### Author:  [@91MR2](https://forums.speedlife.net/u/91MR2)
#### Post date: [July 9, 2005, 9:11pm UTC](https://forums.speedlife.net/t/the-barf-is-still-good-for-a-good-laugh-every-now-and-then/702/2 "2005-07-09T21:11:14Z")
Wow…
---
### Author:  [@HotRodKid](https://forums.speedlife.net/u/HotRodKid)
#### Post date: [July 9, 2005, 9:14pm UTC](https://forums.speedlife.net/t/the-barf-is-still-good-for-a-good-laugh-every-now-and-then/702/3 "2005-07-09T21:14:46Z")
yea … and the responses to that thread … um …
i informed him that he has to do the wheel wells b4 the 1/4’s … i would do all the welding he needs if he got the wheel wells, but they are kinda expensive from honda and he doesnt seam to weant to go that route
if he did, id be happy to do it all right and get it filled and primed … i have a welder and filler supplies …
---
### Author:  [@\_Karu](https://forums.speedlife.net/u/_Karu)
#### Post date: [July 9, 2005, 9:54pm UTC](https://forums.speedlife.net/t/the-barf-is-still-good-for-a-good-laugh-every-now-and-then/702/4 "2005-07-09T21:54:25Z")
omfg.
can’t believe it.
lmao.
---
### Author:  [@bladez](https://forums.speedlife.net/u/bladez)
#### Post date: [July 9, 2005, 9:56pm UTC](https://forums.speedlife.net/t/the-barf-is-still-good-for-a-good-laugh-every-now-and-then/702/5 "2005-07-09T21:56:19Z")
:bloated:
---
### Author:  [@HotRodKid](https://forums.speedlife.net/u/HotRodKid)
#### Post date: [July 9, 2005, 10:11pm UTC](https://forums.speedlife.net/t/the-barf-is-still-good-for-a-good-laugh-every-now-and-then/702/6 "2005-07-09T22:11:48Z")
well if he trimmed the panel down to just what he realy needs to repair the rust, it wouldnt be bad at all … no reason to screw w/ taillight , bumper, gas door, body moulding or side skirt fitment by layering on an extra panel if u dont need to tho
---
### Author:  [@SI01](https://forums.speedlife.net/u/SI01)
#### Post date: [July 10, 2005, 8:02am UTC](https://forums.speedlife.net/t/the-barf-is-still-good-for-a-good-laugh-every-now-and-then/702/7 "2005-07-10T08:02:19Z")
Thats…uh…special…
---
### Author:  [@Z24Challenge](https://forums.speedlife.net/u/Z24Challenge)
#### Post date: [July 10, 2005, 8:04am UTC](https://forums.speedlife.net/t/the-barf-is-still-good-for-a-good-laugh-every-now-and-then/702/8 "2005-07-10T08:04:55Z")
Why not remove the taillight before priming?
I mean come on… I’m nowhere near as knowledgable as a lot of you, but even I know that.
Eh well, hopefully he gets some help soon.
---
### Author:  [@HYPEville](https://forums.speedlife.net/u/HYPEville)
#### Post date: [July 10, 2005, 9:39am UTC](https://forums.speedlife.net/t/the-barf-is-still-good-for-a-good-laugh-every-now-and-then/702/9 "2005-07-10T09:39:59Z")
ok then…
---
### Author:  [@Carnut](https://forums.speedlife.net/u/Carnut)
#### Post date: [July 10, 2005, 11:44am UTC](https://forums.speedlife.net/t/the-barf-is-still-good-for-a-good-laugh-every-now-and-then/702/10 "2005-07-10T11:44:32Z")
yo thats hot…seriously, i would do that in a heart beat, a little more even i suppose then paint it primer or gun meatal and clear coat it…I ❤ fighter jets
---
### Author:  [@JEG](https://forums.speedlife.net/u/JEG)
#### Post date: [July 10, 2005, 12:00pm UTC](https://forums.speedlife.net/t/the-barf-is-still-good-for-a-good-laugh-every-now-and-then/702/11 "2005-07-10T12:00:13Z")
:lol: lmfaoatthattoolbox
---
### Author:  [@zwarbyt](https://forums.speedlife.net/u/zwarbyt)
#### Post date: [July 10, 2005, 5:56pm UTC](https://forums.speedlife.net/t/the-barf-is-still-good-for-a-good-laugh-every-now-and-then/702/12 "2005-07-10T17:56:04Z")
who posted that?
---
### Author:  [@HotRodKid](https://forums.speedlife.net/u/HotRodKid)
#### Post date: [July 10, 2005, 6:18pm UTC](https://forums.speedlife.net/t/the-barf-is-still-good-for-a-good-laugh-every-now-and-then/702/13 "2005-07-10T18:18:03Z")
> [@zwarbyt](#):
>
> who posted that?
> [@ieatpaint315](#):
>
> .
.
> [@Carnut](#):
>
> yo thats hot…seriously, i would do that in a heart beat, a little more even i suppose then paint it primer or gun meatal and clear coat it…I ❤ fighter jets
but at the same time … its not NEARLY as bad as the guys that buy the widebody kits, and they attempt to attach them by just driving wood screws through them
or for that matter, the guy that used the cabinetry hinges on his A pillar to make “Lambo doors”
---
### Author:  [@HotRodKid](https://forums.speedlife.net/u/HotRodKid)
#### Post date: [July 10, 2005, 6:21pm UTC](https://forums.speedlife.net/t/the-barf-is-still-good-for-a-good-laugh-every-now-and-then/702/14 "2005-07-10T18:21:12Z")
> [@Carnut](#):
>
> yo thats hot…seriously, i would do that in a heart beat, a little more even i suppose then paint it primer or gun meatal and clear coat it…I ❤ fighter jets
but at the same time … its not NEARLY as bad as the guys that buy the widebody kits, and they attempt to attach them by just driving wood screws through them
or for that matter, the guy that used the cabinetry hinges on his A pillar to make “Lambo doors”
---
### Author:  [@Zer0DazE](https://forums.speedlife.net/u/Zer0DazE)
#### Post date: [July 11, 2005, 5:16am UTC](https://forums.speedlife.net/t/the-barf-is-still-good-for-a-good-laugh-every-now-and-then/702/15 "2005-07-11T05:16:10Z")
i cant stand stupid people
---
### Author:  [@ly555is](https://forums.speedlife.net/u/ly555is)
#### Post date: [July 11, 2005, 7:09am UTC](https://forums.speedlife.net/t/the-barf-is-still-good-for-a-good-laugh-every-now-and-then/702/16 "2005-07-11T07:09:00Z")
omfg i’ve met that dude at mighty before… i didn’t think he’d do something like that, i think he has a '69 olds 442 as well that someone obviously needs to get away from him too
---
### Author:  [@93dx\_hatch](https://forums.speedlife.net/u/93dx_hatch)
#### Post date: [July 11, 2005, 8:29am UTC](https://forums.speedlife.net/t/the-barf-is-still-good-for-a-good-laugh-every-now-and-then/702/17 "2005-07-11T08:29:08Z")
its really not that bad of an idea. I’ve done this before on an accord that didn’t have any 1/4 panels left. I did it on both sides just like he did with rivits. I didn’t have a welder and it worked, Its not like its a show car.
BTW, I did the 1/4s in the accord 4 years ago and still no rust, cracking, nothing, still looks good.
Its not an M3 its a civic
---
### Author:  [@Bacon](https://forums.speedlife.net/u/Bacon)
#### Post date: [July 11, 2005, 9:51am UTC](https://forums.speedlife.net/t/the-barf-is-still-good-for-a-good-laugh-every-now-and-then/702/18 "2005-07-11T09:51:15Z")
Rusty Ranger 4 Life! Worked for a few years for me, then again it was pretty much the ugliest drivable truck in the state.
---
### Author:  [@RockKittie](https://forums.speedlife.net/u/RockKittie)
#### Post date: [July 11, 2005, 9:52am UTC](https://forums.speedlife.net/t/the-barf-is-still-good-for-a-good-laugh-every-now-and-then/702/19 "2005-07-11T09:52:25Z")
OMG lol