# The OFFICIAL Gun Thread. **URL:** \ **Category:** Shift518 Off Topic\ **Created:** [March 1, 2009, 9:19pm UTC](https://forums.speedlife.net/t/the-official-gun-thread/242496 "2009-03-01T21:19:43Z")\ **Posts on this page:** 1\ **Showing post:** 1732
**Author:** ![Cossey](https://avatars.discourse-cdn.com/v4/letter/c/3ec8ea/32.png) [@Cossey](https://forums.speedlife.net/u/Cossey)\ **Post date:** [March 31, 2012, 9:53pm UTC](https://forums.speedlife.net/t/the-official-gun-thread/242496/1732 "2012-03-31T21:53:58Z")
> [@WTH: Someone to move my toolbox to my new job](https://forums.speedlife.net/t/wth-someone-to-move-my-toolbox-to-my-new-job/48915/4): > > Put a BSA 4x30 scope on my SKS. And while this is up i might as well ask, What do i have to do to make this NYS compliant ? I also have the 20rd tapco Mag. Im pretty sure that has to be pinned to only hold 5 rounds though. Mag needs to be pinned to hold 10rds. Stock has to be pinned. Bayonet lug must be ground off. I am not 100% sure, but I believe converting to the Tapco stock means the whole rifle needs to be 922r compliant (which is a federal law, not just NYS). For 922r compliance, there needs to be 10 or less imported parts on the rifle out of a list of 14 that the SKS has on the list. Because you added a pistol grip, but it is US made, it kinda just cancels that one out. Here’s a list of the other 14 parts: 1. ``` Receiver ``` 2. ``` Barrel ``` 3. ``` Bolt ``` 4. ``` Bolt carrier ``` 5. ``` Gas piston ``` 6. ``` Trigger housing ``` 7. ``` Trigger ``` 8. ``` Hammer ``` 9. ``` Sear ``` 10. Disconnector 11. Stock - You have this, so mark that off the list. 12. Handguard - You have this, so mark that off the list. 13. Magazine body - You have this, so mark that off the list. 14. Follower - You have this, so mark that off the list. So as long as your mag is pinned to 10 rds, and your stock pinned in w/e position you want, and a bayo lug ground off if you have one, you are 100% good to go. The Tapco stock/mag set included all the 922r compliance stuff you needed, so no worries there. Just be careful because the second you put a magazine that’ll work but is not 100% made in the USA, the rifle is in violation of 922r. Blame Clinton for that one. --- _[View the full topic](https://forums.speedlife.net/t/the-official-gun-thread/242496)._