# thoughts/ ideas / help on removing caliper bolts

**URL:** <https://forums.speedlife.net/t/thoughts-ideas-help-on-removing-caliper-bolts/159863>\
**Category:** NYSpeed Automotive\
**Created:** [September 1, 2010, 4:39pm UTC](https://forums.speedlife.net/t/thoughts-ideas-help-on-removing-caliper-bolts/159863 "2010-09-01T16:39:59Z")\
**Posts on this page:** 5\
**Page:** 2

<div class="post-metadata">

**Author:** ![rugsr](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/rugsr/32/7474_2.png) [@rugsr](https://forums.speedlife.net/u/rugsr)\
**Post date:** [September 3, 2010, 5:21am UTC](https://forums.speedlife.net/t/thoughts-ideas-help-on-removing-caliper-bolts/159863/21 "2010-09-03T05:21:06Z")

</div>

i agree…mapp torch

---

<div class="post-metadata">

**Author:** ![Mr\_T](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/mr_t/32/7454_2.png) [@Mr\_T](https://forums.speedlife.net/u/Mr_T)\
**Post date:** [September 3, 2010, 5:40pm UTC](https://forums.speedlife.net/t/thoughts-ideas-help-on-removing-caliper-bolts/159863/22 "2010-09-03T17:40:09Z")

</div>

hm i just dont feel comfortable torching shit soo close to the coil overs/ brake lines.

---

<div class="post-metadata">

**Author:** ![llink78](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/llink78/32/8037_2.png) [@llink78](https://forums.speedlife.net/u/llink78)\
**Post date:** [September 3, 2010, 5:48pm UTC](https://forums.speedlife.net/t/thoughts-ideas-help-on-removing-caliper-bolts/159863/23 "2010-09-03T17:48:26Z")

</div>

depending on where you live i can stop by with a 1/2 drive craftman set and try to break em for ya. id be free till about 4 give me a PM

---

<div class="post-metadata">

**Author:** ![Jam](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jam/32/7235_2.png) [@Jam](https://forums.speedlife.net/u/Jam)\
**Post date:** [September 3, 2010, 11:56pm UTC](https://forums.speedlife.net/t/thoughts-ideas-help-on-removing-caliper-bolts/159863/24 "2010-09-03T23:56:50Z")

</div>

> [@JayS](#):
>
> This includes using a 2 foot breaker bar with a 3 foot pipe that had to put all my weight on and actually bounce to get it to break loose. When that let go it sounded like a gun went off, but the socket was fine.

LOL

---

<div class="post-metadata">

**Author:** ![Freek](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/freek/32/7357_2.png) [@Freek](https://forums.speedlife.net/u/Freek)\
**Post date:** [September 4, 2010, 12:05am UTC](https://forums.speedlife.net/t/thoughts-ideas-help-on-removing-caliper-bolts/159863/25 "2010-09-04T00:05:24Z")

</div>

> [@newman](#):
>
> Mapp torch is what’s up for sure.
> 
> And you’re probably using cheap sockets if they’re breaking.

This.  
Another trick I’ve used to cooling as well for slider bolts. After using an impact gun to take the caliper bolts out and still having very frozen sliders a combination of the torch ( be careful you don’t melt the steel) then throw it in a deep freezer. Continue this for a bit along with PB blaster. It’'ll either eventually work or snap the slider bolt.

[Previous page](https://forums.speedlife.net/t/thoughts-ideas-help-on-removing-caliper-bolts/159863.md?page=1)
