# thread pitch on s13 shifter

**URL:** <https://forums.speedlife.net/t/thread-pitch-on-s13-shifter/91876>\
**Category:** SON240sx Automotive\
**Created:** [January 13, 2006, 4:11pm UTC](https://forums.speedlife.net/t/thread-pitch-on-s13-shifter/91876 "2006-01-13T16:11:54Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![MBs13](https://avatars.discourse-cdn.com/v4/letter/m/ba8739/32.png) [@MBs13](https://forums.speedlife.net/u/MBs13)\
**Post date:** [January 13, 2006, 4:11pm UTC](https://forums.speedlife.net/t/thread-pitch-on-s13-shifter/91876/1 "2006-01-13T16:11:54Z")

</div>

Looking to buy a new shift knob but not sure what the thread pitch is…The one i’m looking at has a 10 mm thread pitch. Any ideas?

---

<div class="post-metadata">

**Author:** ![spilner](https://avatars.discourse-cdn.com/v4/letter/s/f17d59/32.png) [@spilner](https://forums.speedlife.net/u/spilner)\
**Post date:** [January 13, 2006, 4:40pm UTC](https://forums.speedlife.net/t/thread-pitch-on-s13-shifter/91876/2 "2006-01-13T16:40:05Z")

</div>

get some nuts and see which one fits on the shifter, make sure u mark them and then you’ll know

---

<div class="post-metadata">

**Author:** ![spd-dmn](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/spd-dmn/32/5513_2.png) [@spd-dmn](https://forums.speedlife.net/u/spd-dmn)\
**Post date:** [January 13, 2006, 4:58pm UTC](https://forums.speedlife.net/t/thread-pitch-on-s13-shifter/91876/3 "2006-01-13T16:58:52Z")

</div>

10mm is the diameter. the thread pitch, if i recall correctly, is 1.25