# Throttle Bodies **URL:** \ **Category:** PittSpeed Automotive\ **Created:** [April 30, 2007, 4:56pm UTC](https://forums.speedlife.net/t/throttle-bodies/189641 "2007-04-30T16:56:03Z")\ **Posts on this page:** 19\ **Page:** 1
**Author:** ![wrayzor](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/wrayzor/32/6021_2.png) [@wrayzor](https://forums.speedlife.net/u/wrayzor)\ **Post date:** [April 30, 2007, 4:56pm UTC](https://forums.speedlife.net/t/throttle-bodies/189641/1 "2007-04-30T16:56:03Z")
These question are going to seem redundant but I didn’t want this to get over looked if I just added it in the other thread, (Attn Brian! I need to regain thread starter of the year title) but anyways… What’s the deal with throttle bodies? Heard that I should go with a gsr throttle body, anyone chime in on this. Any other throttle bodies recommendend, it will be teamed with the Skunk2 manifold I just bought. ---
**Author:** ![JackdUp](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jackdup/32/6015_2.png) [@JackdUp](https://forums.speedlife.net/u/JackdUp)\ **Post date:** [April 30, 2007, 5:18pm UTC](https://forums.speedlife.net/t/throttle-bodies/189641/2 "2007-04-30T17:18:26Z")
I’m happy with the GSR TB on my Skunk 2…need a GSR TB? ---
**Author:** ![wrayzor](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/wrayzor/32/6021_2.png) [@wrayzor](https://forums.speedlife.net/u/wrayzor)\ **Post date:** [April 30, 2007, 5:41pm UTC](https://forums.speedlife.net/t/throttle-bodies/189641/3 "2007-04-30T17:41:04Z")
> [@Sirius Vs. MP3](https://forums.speedlife.net/t/sirius-vs-mp3/29830/7): > > I’m happy with the GSR TB on my Skunk 2…need a GSR TB? why yes I do! I just picked up the skunk2 manifold, you have any issues with oem sensor and things for it? ---
**Author:** ![imported\_gearhead](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/imported_gearhead/32/5957_2.png) [@imported\_gearhead](https://forums.speedlife.net/u/imported_gearhead)\ **Post date:** [April 30, 2007, 5:51pm UTC](https://forums.speedlife.net/t/throttle-bodies/189641/4 "2007-04-30T17:51:27Z")
B series and H series interchange, so i want to say JDM H22’s come big dog style. ---
**Author:** ![wrayzor](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/wrayzor/32/6021_2.png) [@wrayzor](https://forums.speedlife.net/u/wrayzor)\ **Post date:** [April 30, 2007, 5:59pm UTC](https://forums.speedlife.net/t/throttle-bodies/189641/5 "2007-04-30T17:59:36Z")
Any idea how big gsr or H series throttle bodies are? ---
**Author:** ![Pewter](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pewter/32/5936_2.png) [@Pewter](https://forums.speedlife.net/u/Pewter)\ **Post date:** [April 30, 2007, 6:21pm UTC](https://forums.speedlife.net/t/throttle-bodies/189641/6 "2007-04-30T18:21:45Z")
> [@R32 Skyline winter build-up](https://forums.speedlife.net/t/r32-skyline-winter-build-up/24030/145): > > New thread starter of the year? :dunno: :kekegay: ---
**Author:** ![wrayzor](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/wrayzor/32/6021_2.png) [@wrayzor](https://forums.speedlife.net/u/wrayzor)\ **Post date:** [April 30, 2007, 6:47pm UTC](https://forums.speedlife.net/t/throttle-bodies/189641/7 "2007-04-30T18:47:14Z")
> [@How does this audi a6 look?](https://forums.speedlife.net/t/how-does-this-audi-a6-look/29865/3): > > :kekegay: :asshole ---
**Author:** ![Black\_Integra](https://avatars.discourse-cdn.com/v4/letter/b/5daacb/32.png) [@Black\_Integra](https://forums.speedlife.net/u/Black_Integra)\ **Post date:** [April 30, 2007, 7:33pm UTC](https://forums.speedlife.net/t/throttle-bodies/189641/8 "2007-04-30T19:33:38Z")
i have the edelbrock 65mm and its the exact same port size as my skunk 2 manifold ---
**Author:** ![wrayzor](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/wrayzor/32/6021_2.png) [@wrayzor](https://forums.speedlife.net/u/wrayzor)\ **Post date:** [April 30, 2007, 7:47pm UTC](https://forums.speedlife.net/t/throttle-bodies/189641/9 "2007-04-30T19:47:32Z")
never mind using a gsr tb cuz its the exact same size as a b16, so what would the plus of port matching tb to mani or of getting a bigger tb? ---
**Author:** ![JackdUp](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jackdup/32/6015_2.png) [@JackdUp](https://forums.speedlife.net/u/JackdUp)\ **Post date:** [April 30, 2007, 7:58pm UTC](https://forums.speedlife.net/t/throttle-bodies/189641/10 "2007-04-30T19:58:39Z")
Port matching smooths flow? That Edelbrock sounds good. ---
**Author:** ![Black\_Integra](https://avatars.discourse-cdn.com/v4/letter/b/5daacb/32.png) [@Black\_Integra](https://forums.speedlife.net/u/Black_Integra)\ **Post date:** [April 30, 2007, 8:01pm UTC](https://forums.speedlife.net/t/throttle-bodies/189641/11 "2007-04-30T20:01:17Z")
the air flow would be going small to big. by only a few mm. (i wouldnt be too worried about it, unless you want the extra .5-1 hp.) but if u had a tb larger than your intake manifold, and not port matched you would be defeating the purpose and creating an abrupt bottleneck for the air flow. all and all its a honda it will run and drive fine with no matter what you decide to put on it. ---
**Author:** ![wrayzor](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/wrayzor/32/6021_2.png) [@wrayzor](https://forums.speedlife.net/u/wrayzor)\ **Post date:** [April 30, 2007, 8:24pm UTC](https://forums.speedlife.net/t/throttle-bodies/189641/12 "2007-04-30T20:24:12Z")
> [@\*\*\*\*Official: Southgate Meet Thread\*\*\*\*](https://forums.speedlife.net/t/official-southgate-meet-thread/29171/549): > > Port matching smooths flow? That Edelbrock sounds good. its a very nice > [@Stay off my lawn!](https://forums.speedlife.net/t/stay-off-my-lawn/29870/5): > > the air flow would be going small to big. by only a few mm. (i wouldnt be too worried about it, unless you want the extra .5-1 hp.) but if u had a tb larger than your intake manifold, and not port matched you would be defeating the purpose and creating an abrupt bottleneck for the air flow. all and all its a honda it will run and drive fine with no matter what you decide to put on it. where did you buy your tb from? ---
**Author:** ![Black\_Integra](https://avatars.discourse-cdn.com/v4/letter/b/5daacb/32.png) [@Black\_Integra](https://forums.speedlife.net/u/Black_Integra)\ **Post date:** [April 30, 2007, 8:27pm UTC](https://forums.speedlife.net/t/throttle-bodies/189641/13 "2007-04-30T20:27:19Z")
i brought it off a friend who bought it from Summit. ---
**Author:** ![wrayzor](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/wrayzor/32/6021_2.png) [@wrayzor](https://forums.speedlife.net/u/wrayzor)\ **Post date:** [April 30, 2007, 8:30pm UTC](https://forums.speedlife.net/t/throttle-bodies/189641/14 "2007-04-30T20:30:48Z")
> [@iPhone?](https://forums.speedlife.net/t/iphone/29412/10): > > i brought it off a friend who bought it from Summit. alright thanks ---
**Author:** ![Black\_Integra](https://avatars.discourse-cdn.com/v4/letter/b/5daacb/32.png) [@Black\_Integra](https://forums.speedlife.net/u/Black_Integra)\ **Post date:** [April 30, 2007, 8:33pm UTC](https://forums.speedlife.net/t/throttle-bodies/189641/15 "2007-04-30T20:33:31Z")
i think they’re around $300 ---
**Author:** ![wrayzor](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/wrayzor/32/6021_2.png) [@wrayzor](https://forums.speedlife.net/u/wrayzor)\ **Post date:** [April 30, 2007, 8:35pm UTC](https://forums.speedlife.net/t/throttle-bodies/189641/16 "2007-04-30T20:35:05Z")
> [@Drug test question...](https://forums.speedlife.net/t/drug-test-question/29871/2): > > i think they’re around $300 wonderful! ---
**Author:** ![imported\_showtime](https://avatars.discourse-cdn.com/v4/letter/i/51bf81/32.png) [@imported\_showtime](https://forums.speedlife.net/u/imported_showtime)\ **Post date:** [May 1, 2007, 6:57am UTC](https://forums.speedlife.net/t/throttle-bodies/189641/17 "2007-05-01T06:57:22Z")
h22 is 60mm i think… ive seen a shunk2 thats 68mm blox makes a 70mm bdl has similar sizes there is a guy on honda-tech that bores them out & cleans them up real nice…& reasonable. $100 here is the Honda-tech thread showing his work…good stuf IMO [http://www.honda-tech.com/zerothread?id=771875](http://www.honda-tech.com/zerothread?id=771875) ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\ **Post date:** [May 1, 2007, 7:03am UTC](https://forums.speedlife.net/t/throttle-bodies/189641/18 "2007-05-01T07:03:12Z")
> [@Callout MARCUS](https://forums.speedlife.net/t/callout-marcus/29791/129): > > there is a guy on honda-tech that bores them out & cleans them up real nice…& reasonable. $100 > here is the Honda-tech thread showing his work…good stuf IMO > [Big bore throttle bodies $100. - Honda-Tech - Honda Forum Discussion](http://www.honda-tech.com/zerothread?id=771875) i had my throttlebody done by maxbore. he does excellent work for the money. mines at 66mm and still uses a factory type r gasket. if you can spare a week or so without the throttlebody i also suggest max bore. just make sure you overly clear with the return address. ---
**Author:** ![wrayzor](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/wrayzor/32/6021_2.png) [@wrayzor](https://forums.speedlife.net/u/wrayzor)\ **Post date:** [May 1, 2007, 8:51am UTC](https://forums.speedlife.net/t/throttle-bodies/189641/19 "2007-05-01T08:51:02Z")
> [@Callout MARCUS](https://forums.speedlife.net/t/callout-marcus/29791/129): > > h22 is 60mm i think… ive seen a shunk2 thats 68mm > blox makes a 70mm > bdl has similar sizes > > there is a guy on honda-tech that bores them out & cleans them up real nice…& reasonable. $100 > here is the Honda-tech thread showing his work…good stuf IMO > [Big bore throttle bodies $100. - Honda-Tech - Honda Forum Discussion](http://www.honda-tech.com/zerothread?id=771875) > [@Niagara (Canada) meet details - May 27th](https://forums.speedlife.net/t/niagara-canada-meet-details-may-27th/24896/53): > > i had my throttlebody done by maxbore. he does excellent work for the money. mines at 66mm and still uses a factory type r gasket. if you can spare a week or so without the throttlebody i also suggest max bore. just make sure you overly clear with the return address. thanks alot