# Tig welding?

**URL:** <https://forums.speedlife.net/t/tig-welding/193837>\
**Category:** PittSpeed Automotive\
**Created:** [November 25, 2007, 11:49pm UTC](https://forums.speedlife.net/t/tig-welding/193837 "2007-11-25T23:49:10Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![spoolinsteve](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/spoolinsteve/32/6026_2.png) [@spoolinsteve](https://forums.speedlife.net/u/spoolinsteve)\
**Post date:** [November 25, 2007, 11:49pm UTC](https://forums.speedlife.net/t/tig-welding/193837/1 "2007-11-25T23:49:10Z")

</div>

General inquire about anyone on the board that will do some tig welding at a good price if need be, I’m throwing around some ideas for intake and exhaust manifolds at some point. If I ever get around to it, I’d fabricate it all up and if its steel I would tack weld it as best I can. Not sure about doing aluminum with the mig.

I dont want you to get the wrong idea that I need this done right now, I’m just trying to get some options going.

---

<div class="post-metadata">

**Author:** ![dyingwish](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/dyingwish/32/6041_2.png) [@dyingwish](https://forums.speedlife.net/u/dyingwish)\
**Post date:** [November 26, 2007, 5:42am UTC](https://forums.speedlife.net/t/tig-welding/193837/2 "2007-11-26T05:42:59Z")

</div>

Talk to Jeff @ 1st Try, or Jay @ Domination Chassis. They should be able to help you.

---

<div class="post-metadata">

**Author:** ![whitey](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/whitey/32/5911_2.png) [@whitey](https://forums.speedlife.net/u/whitey)\
**Post date:** [November 26, 2007, 5:44am UTC](https://forums.speedlife.net/t/tig-welding/193837/3 "2007-11-26T05:44:50Z")

</div>

jeff from 1st try or dominick from dominick racing would probably be your best candidates.

---

<div class="post-metadata">

**Author:** ![bgblockelcamino](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bgblockelcamino/32/5997_2.png) [@bgblockelcamino](https://forums.speedlife.net/u/bgblockelcamino)\
**Post date:** [November 26, 2007, 6:10am UTC](https://forums.speedlife.net/t/tig-welding/193837/4 "2007-11-26T06:10:21Z")

</div>

let me know i can help guide you in the direction if you want to do as much as possible yourself. i can help locate some materials or see what i have in stock. good luck with what you decide to do.

---

<div class="post-metadata">

**Author:** ![SoLow](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/solow/32/6001_2.png) [@SoLow](https://forums.speedlife.net/u/SoLow)\
**Post date:** [November 27, 2007, 9:31am UTC](https://forums.speedlife.net/t/tig-welding/193837/5 "2007-11-27T09:31:28Z")

</div>

Jeff @ 1st-Try