# Tooslohatch's turbo civic build **URL:** \ **Category:** Builds\ **Created:** [December 1, 2008, 7:04am UTC](https://forums.speedlife.net/t/tooslohatchs-turbo-civic-build/200880 "2008-12-01T07:04:42Z")\ **Posts on this page:** 20\ **Page:** 2
**Author:** ![kilmer420](https://avatars.discourse-cdn.com/v4/letter/k/d6d6ee/32.png) [@kilmer420](https://forums.speedlife.net/u/kilmer420)\ **Post date:** [December 10, 2008, 2:19pm UTC](https://forums.speedlife.net/t/tooslohatchs-turbo-civic-build/200880/21 "2008-12-10T14:19:41Z")
Nice numbers… ---
**Author:** ![Mark\_Morris](https://avatars.discourse-cdn.com/v4/letter/m/a9a28c/32.png) [@Mark\_Morris](https://forums.speedlife.net/u/Mark_Morris)\ **Post date:** [December 11, 2008, 10:44am UTC](https://forums.speedlife.net/t/tooslohatchs-turbo-civic-build/200880/22 "2008-12-11T10:44:34Z")
Watch what you say about those German cars. :bigok: Looking good Micah-- glad to hear you got the turbo setup on-- now it’s time for the 2-bar MAP sensor. ---
**Author:** ![turbob16](https://avatars.discourse-cdn.com/v4/letter/t/da6949/32.png) [@turbob16](https://forums.speedlife.net/u/turbob16)\ **Post date:** [December 11, 2008, 10:48am UTC](https://forums.speedlife.net/t/tooslohatchs-turbo-civic-build/200880/23 "2008-12-11T10:48:19Z")
goodluck with the turbo stuff man, you should be able to push out some good numbers with all the stuff you got from me, hope it works out, let me know if u need any help ---
**Author:** ![imported\_gearhead](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/imported_gearhead/32/5957_2.png) [@imported\_gearhead](https://forums.speedlife.net/u/imported_gearhead)\ **Post date:** [December 11, 2008, 2:36pm UTC](https://forums.speedlife.net/t/tooslohatchs-turbo-civic-build/200880/24 "2008-12-11T14:36:39Z")
all with a $100 turbo… 👼 ---
**Author:** ![tooslohatch](https://avatars.discourse-cdn.com/v4/letter/t/839c29/32.png) [@tooslohatch](https://forums.speedlife.net/u/tooslohatch)\ **Post date:** [December 11, 2008, 3:49pm UTC](https://forums.speedlife.net/t/tooslohatchs-turbo-civic-build/200880/25 "2008-12-11T15:49:28Z")
> [@Is this ethical/legal?](https://forums.speedlife.net/t/is-this-ethical-legal/38965/7): > > all with a $100 turbo… 👼 And i thank you very much for that! ![http://i229.photobucket.com/albums/ee111/tooslojetta/civic033.jpg](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/3X/d/9/d9297b4c3efba570909cdc96bcda962c2607a8d6.jpeg) a picture of my setup (dumptube, is in the making and will recirculate into the exhaust) sorry about here being no updates. here’s a update/writeup on how i relocated my battery. I didn’t have enough money to buy all the wire to put it in the trunk and, being this is a FWD car, i wanted to keep the weight over the front wheels if possible. so here’s what i did. taking the front end off my first attempt was using the stock battery. that didn’t work because my wheel rubbed on the tray when i took a left turn. i believe if you have the stock wheels on the stock battery should work just fine. i moved the battery inside the fender and made some minor adjustments to the battery tray. it clears the bumper and bumper cover just fine, but as said before, hits the wheel during a turn. my next attempt was using a Deka battery. these weigh just 11lbs!! to clear the front wheels i had to cut the battery tray to the size of the battery. next i drilled and tapped holes in the frame to mount the tray. to hold the tray up, i cut a piece of steel with holes and twisted it. upon setting the battery in, i noticed the hold down from my previous attemp wouldn’t hold _this_ battery down, it was too small. fortunately, we have lots of scrap steel and i was able to find a peice of angle steel with holes in it. i cut this to the length of the battery. i then used the long hold down rods to secure the angle steel against the battery. once i tightened it down, i gave the battery a few yanks just to see if it might fall out. the whole entire car moved up and down, so i dont think the battery is going anywhere! Also, my rotors were warped, so while i had the car apart, i replaced them. * * * this is the bodywork i did on the car during the Fall. it took up a whole Saturday just to get the metal welded in. here’s the where the rust was on the right and the left next, i grabbed a piece of sheet metal and started cutting. i measured the size i would need for the right side, cut it out, and welded it on. sorry, im new to welding and relatively new to body work. once i had that welded and ground down i cut the piece for the underside. i ground the welds down and applied a thin layer of tiger hair just to make sure no more water got in. i did the same thing on the left side also, i wanted to keep the black strip of rubber on the inner fender so that it looked like there was no bodywork done on the quarters. to do this, i had to re-make the metal lip i did this on both sides. i dont know where the picture of the other side is, though. now for the bondo and primer down on the ground again. unfortunately, i have to wait until next spring to paint it. it’s just too cold right now. p.s. sorry for the horrible pictures ---
**Author:** ![SmokinDiesel](https://avatars.discourse-cdn.com/v4/letter/s/57b2e6/32.png) [@SmokinDiesel](https://forums.speedlife.net/u/SmokinDiesel)\ **Post date:** [December 11, 2008, 6:29pm UTC](https://forums.speedlife.net/t/tooslohatchs-turbo-civic-build/200880/26 "2008-12-11T18:29:13Z")
Pics aren’t horrible at all. I think its freakin’ awesome that you are doing such a great job, being as young as you are, and on a budget … and doing things the right way. Keep up the amazing work … ---
**Author:** ![06se-r](https://avatars.discourse-cdn.com/v4/letter/0/c5a1d2/32.png) [@06se-r](https://forums.speedlife.net/u/06se-r)\ **Post date:** [December 11, 2008, 8:33pm UTC](https://forums.speedlife.net/t/tooslohatchs-turbo-civic-build/200880/27 "2008-12-11T20:33:06Z")
wow, it looks great, keep it up. for being so young, it looks very well put together, you should be very proud. keep it up. ---
**Author:** ![Mark\_Morris](https://avatars.discourse-cdn.com/v4/letter/m/a9a28c/32.png) [@Mark\_Morris](https://forums.speedlife.net/u/Mark_Morris)\ **Post date:** [December 12, 2008, 5:45am UTC](https://forums.speedlife.net/t/tooslohatchs-turbo-civic-build/200880/28 "2008-12-12T05:45:03Z")
Nice work Micah. Run the dump tube straight down and leave it open-- it will be simpler and make more power than a recirculated setup-- especially if your exhaust is on the small side. ---
**Author:** ![1badx](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/1badx/32/6052_2.png) [@1badx](https://forums.speedlife.net/u/1badx)\ **Post date:** [December 12, 2008, 5:48am UTC](https://forums.speedlife.net/t/tooslohatchs-turbo-civic-build/200880/29 "2008-12-12T05:48:32Z")
> [@Long car ride with a dog: what to do?](https://forums.speedlife.net/t/long-car-ride-with-a-dog-what-to-do/38969/3): > > fortunately, we have lots of scrap steel and i was able to find a peice of angle steel with holes in it. i cut this to the length of the battery. Hey!! I was going to use that angle for the dyno mufflers!! I’ll send you the bill… ---
**Author:** ![dyingwish](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/dyingwish/32/6041_2.png) [@dyingwish](https://forums.speedlife.net/u/dyingwish)\ **Post date:** [December 12, 2008, 5:50am UTC](https://forums.speedlife.net/t/tooslohatchs-turbo-civic-build/200880/30 "2008-12-12T05:50:11Z")
Body work doesn’t look too bad…but I would remove that weatherstrip immediately. I know it looks nicer, but that is the very reason it rusts in the first place. That rubber traps dirt and water inside and makes a very opportune place to start rusting. Seen it a billion times. ---
**Author:** ![imported\_gearhead](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/imported_gearhead/32/5957_2.png) [@imported\_gearhead](https://forums.speedlife.net/u/imported_gearhead)\ **Post date:** [December 12, 2008, 6:32am UTC](https://forums.speedlife.net/t/tooslohatchs-turbo-civic-build/200880/31 "2008-12-12T06:32:17Z")
> [@Christmas Gift Opinion...](https://forums.speedlife.net/t/christmas-gift-opinion/38971/6): > > Hey!! I was going to use that angle for the dyno mufflers!! I’ll send you the bill… 🤣 ---
**Author:** ![1badx](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/1badx/32/6052_2.png) [@1badx](https://forums.speedlife.net/u/1badx)\ **Post date:** [December 12, 2008, 6:41am UTC](https://forums.speedlife.net/t/tooslohatchs-turbo-civic-build/200880/32 "2008-12-12T06:41:38Z")
Yeah, and so much for my rule of “no working on cars on the dyno”… ---
**Author:** ![tooslohatch](https://avatars.discourse-cdn.com/v4/letter/t/839c29/32.png) [@tooslohatch](https://forums.speedlife.net/u/tooslohatch)\ **Post date:** [December 13, 2008, 6:00am UTC](https://forums.speedlife.net/t/tooslohatchs-turbo-civic-build/200880/33 "2008-12-13T06:00:24Z")
thanks, guys. i cant wait to get a job and money so i can build a REAL motor for this. 600whp wouldn’t be too bad! ---
**Author:** ![kilmer420](https://avatars.discourse-cdn.com/v4/letter/k/d6d6ee/32.png) [@kilmer420](https://forums.speedlife.net/u/kilmer420)\ **Post date:** [December 13, 2008, 7:24am UTC](https://forums.speedlife.net/t/tooslohatchs-turbo-civic-build/200880/34 "2008-12-13T07:24:07Z")
> [@Long car ride with a dog: what to do?](https://forums.speedlife.net/t/long-car-ride-with-a-dog-what-to-do/38969/16): > > thanks, guys. i cant wait to get a job and money so i can build a REAL motor for this. 600whp wouldn’t be too bad! figure out how this ‘feels/drives/performs’ first before you make such a huge HP jump :burnout: ---
**Author:** ![bgblockelcamino](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bgblockelcamino/32/5997_2.png) [@bgblockelcamino](https://forums.speedlife.net/u/bgblockelcamino)\ **Post date:** [December 13, 2008, 9:30am UTC](https://forums.speedlife.net/t/tooslohatchs-turbo-civic-build/200880/35 "2008-12-13T09:30:02Z")
nice job on the body work. but i vote for remove rubber peice. think that was the factory rust option you check off when you order it. ---
**Author:** ![tooslohatch](https://avatars.discourse-cdn.com/v4/letter/t/839c29/32.png) [@tooslohatch](https://forums.speedlife.net/u/tooslohatch)\ **Post date:** [March 28, 2009, 5:29pm UTC](https://forums.speedlife.net/t/tooslohatchs-turbo-civic-build/200880/36 "2009-03-28T17:29:56Z")
Well, it’s been a while since I last posted here. But since then I got my license and have driven the car quite a bit. It’s awesome!!! And it’s fast!! i recirculated the dump tube back into the down pipe and it is much more quite to drive. I love it. I also got the quarters painted and got some M/T street ET’s mounted on the stock 13’s. I/m going racing up at Sunset next Sunday and I cant wait!! here’s some pictures! ![http://i229.photobucket.com/albums/ee111/tooslojetta/civic078.jpg](http://i229.photobucket.com/albums/ee111/tooslojetta/civic078.jpg) ![http://i229.photobucket.com/albums/ee111/tooslojetta/civic085.jpg](http://i229.photobucket.com/albums/ee111/tooslojetta/civic085.jpg) ![http://i229.photobucket.com/albums/ee111/tooslojetta/civic084-1.jpg](http://i229.photobucket.com/albums/ee111/tooslojetta/civic084-1.jpg) ![http://i229.photobucket.com/albums/ee111/tooslojetta/civic086.jpg](http://i229.photobucket.com/albums/ee111/tooslojetta/civic086.jpg) ![http://i229.photobucket.com/albums/ee111/tooslojetta/civic087.jpg](http://i229.photobucket.com/albums/ee111/tooslojetta/civic087.jpg) ![http://i229.photobucket.com/albums/ee111/tooslojetta/civic088.jpg](http://i229.photobucket.com/albums/ee111/tooslojetta/civic088.jpg) ![http://i229.photobucket.com/albums/ee111/tooslojetta/civic089.jpg](http://i229.photobucket.com/albums/ee111/tooslojetta/civic089.jpg) ![http://i229.photobucket.com/albums/ee111/tooslojetta/civic090.jpg](http://i229.photobucket.com/albums/ee111/tooslojetta/civic090.jpg) ![http://i229.photobucket.com/albums/ee111/tooslojetta/civic091.jpg](http://i229.photobucket.com/albums/ee111/tooslojetta/civic091.jpg) ![http://i229.photobucket.com/albums/ee111/tooslojetta/civic092.jpg](http://i229.photobucket.com/albums/ee111/tooslojetta/civic092.jpg) ![http://i229.photobucket.com/albums/ee111/tooslojetta/civic093.jpg](http://i229.photobucket.com/albums/ee111/tooslojetta/civic093.jpg) ![http://i229.photobucket.com/albums/ee111/tooslojetta/civic094.jpg](http://i229.photobucket.com/albums/ee111/tooslojetta/civic094.jpg) ![http://i229.photobucket.com/albums/ee111/tooslojetta/civic095.jpg](http://i229.photobucket.com/albums/ee111/tooslojetta/civic095.jpg) ---
**Author:** ![bgblockelcamino](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bgblockelcamino/32/5997_2.png) [@bgblockelcamino](https://forums.speedlife.net/u/bgblockelcamino)\ **Post date:** [March 28, 2009, 6:41pm UTC](https://forums.speedlife.net/t/tooslohatchs-turbo-civic-build/200880/37 "2009-03-28T18:41:36Z")
nice job looks great ---
**Author:** ![averagewhiteboy](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/averagewhiteboy/32/6018_2.png) [@averagewhiteboy](https://forums.speedlife.net/u/averagewhiteboy)\ **Post date:** [March 29, 2009, 10:31am UTC](https://forums.speedlife.net/t/tooslohatchs-turbo-civic-build/200880/38 "2009-03-29T10:31:53Z")
Really like the color-matched valve cover. Nice job, dude. ---
**Author:** ![imported\_gearhead](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/imported_gearhead/32/5957_2.png) [@imported\_gearhead](https://forums.speedlife.net/u/imported_gearhead)\ **Post date:** [March 29, 2009, 3:45pm UTC](https://forums.speedlife.net/t/tooslohatchs-turbo-civic-build/200880/39 "2009-03-29T15:45:09Z")
she’s going to be a monster at the track! :bigthumb: ---
**Author:** ![tooslohatch](https://avatars.discourse-cdn.com/v4/letter/t/839c29/32.png) [@tooslohatch](https://forums.speedlife.net/u/tooslohatch)\ **Post date:** [March 30, 2009, 4:22am UTC](https://forums.speedlife.net/t/tooslohatchs-turbo-civic-build/200880/40 "2009-03-30T04:22:32Z")
Thanks guys! I can’t wait to race!!! [Previous page](https://forums.speedlife.net/t/tooslohatchs-turbo-civic-build/200880.md?page=1) [Next page](https://forums.speedlife.net/t/tooslohatchs-turbo-civic-build/200880.md?page=3)