# tranny wiring kade

**URL:** <https://forums.speedlife.net/t/tranny-wiring-kade/158100>\
**Category:** SON240sx Automotive\
**Created:** [July 20, 2010, 7:41am UTC](https://forums.speedlife.net/t/tranny-wiring-kade/158100 "2010-07-20T07:41:35Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![corymcarthur](https://avatars.discourse-cdn.com/v4/letter/c/8e8cbc/32.png) [@corymcarthur](https://forums.speedlife.net/u/corymcarthur)\
**Post date:** [July 20, 2010, 7:41am UTC](https://forums.speedlife.net/t/tranny-wiring-kade/158100/1 "2010-07-20T07:41:35Z")

</div>

alright just did my 5 speed swap, i kept the auto tranny harness but i got no speedo or reverse lights… can anybody help?

---

<div class="post-metadata">

**Author:** ![corymcarthur](https://avatars.discourse-cdn.com/v4/letter/c/8e8cbc/32.png) [@corymcarthur](https://forums.speedlife.net/u/corymcarthur)\
**Post date:** [July 20, 2010, 9:57am UTC](https://forums.speedlife.net/t/tranny-wiring-kade/158100/2 "2010-07-20T09:57:40Z")

</div>

you telling me no one on son has done this swap and know’s?

---

<div class="post-metadata">

**Author:** ![Lil\_Mike](https://avatars.discourse-cdn.com/v4/letter/l/258eb7/32.png) [@Lil\_Mike](https://forums.speedlife.net/u/Lil_Mike)\
**Post date:** [July 22, 2010, 6:37pm UTC](https://forums.speedlife.net/t/tranny-wiring-kade/158100/3 "2010-07-22T18:37:15Z")

</div>

the manual speed sensor should plug right in to where the automatic one was near the bellhousing. for the reverse lights, there are 3 plugs beside the fusebox. the middle one is the one you need to look at, green and white are the reverse wiring, just run some wires down to the reverse switch and it should work.

---

<div class="post-metadata">

**Author:** ![DirrtyDevo](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/dirrtydevo/32/5547_2.png) [@DirrtyDevo](https://forums.speedlife.net/u/DirrtyDevo)\
**Post date:** [July 22, 2010, 11:19pm UTC](https://forums.speedlife.net/t/tranny-wiring-kade/158100/4 "2010-07-22T23:19:41Z")

</div>

If the thin gauge green with a white stripe is going to the reverse lights you need to tap into a 12v souce anywhere and run that wire to the reverse sensor(i think the closest one to the engine or second) and then have a wire running back tapped into that green/white stripe wire.

When you put the tranny into reverse it connects the circuit and your reverse lights will get 12v.

---

<div class="post-metadata">

**Author:** ![corymcarthur](https://avatars.discourse-cdn.com/v4/letter/c/8e8cbc/32.png) [@corymcarthur](https://forums.speedlife.net/u/corymcarthur)\
**Post date:** [July 23, 2010, 7:40am UTC](https://forums.speedlife.net/t/tranny-wiring-kade/158100/5 "2010-07-23T07:40:00Z")

</div>

thanks boys!!! will try it tn/tmrw