# TrueBlue's new project. 56K warn.

**URL:** https://forums.speedlife.net/t/trueblues-new-project-56k-warn/20399
**Category:** NYSpeed Automotive
**Created:** [November 19, 2006, 4:10pm UTC](https://forums.speedlife.net/t/trueblues-new-project-56k-warn/20399 "2006-11-19T16:10:00Z")
**Posts on this page:** 20
**Page:** 1

<div class="post-metadata">

### Author: ![TrueBlue](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/trueblue/32/7245_2.png) [@TrueBlue](https://forums.speedlife.net/u/TrueBlue)
#### Post date: [November 19, 2006, 4:10pm UTC](https://forums.speedlife.net/t/trueblues-new-project-56k-warn/20399/1 "2006-11-19T16:10:00Z")

</div>

Well, after many many moons of looking, almost-purchasing, couple of bodily threats, ( 😃 ) etc., I finally found one. Been a big dream of mine and it’s here. Enjoy fellas (and ladies).

**_1968 Mustang Fastback C-code_**

Here’s what’s there.

Engine:  
Stock 302  
Upgraded to 4bbl 4160 Holley carb (rebuilt)  
Holley electric choke kit installed  
Pertronix Ignitor I

Driveline:  
Tremec TKO 3550 5 speed transmission  
10.5" King Cobra cable clutch with Dual Friction disc  
Ford Racing aluminum flywheel  
Cable clutch pedal conversion with pivot bearing  
New u-joints on balanced shortened driveshaft  
Stock 9" rear end, 3.0:1 limited slip (Trac-Loc)

Brakes:  
Front: New Wilwood 4 piston Dynalite 11" front disc brakes  
Rear: New drums, shoes, springs, slave cylinders, e-brake hardware  
Stock dual resevoir master cyl, manual (no booster)  
All new brake lines with stainless braided flex hoses  
Wilwood proportioning valve

Suspension Front:  
New upper/lower control arms  
New spring perches  
New ball joints  
New strut rod bushings (rubber)  
New 1" front anti-sway bar  
New KYB (white) shocks  
New 620# drop coil springs

Chassis:  
New left side frame rail extension  
New left side front fender aprons  
New outer shock towers (both sides)  
New fender mounting brackets  
New right side frame rail extension repair (at bumper mount)  
New battery tray  
New export brace

Steering:  
Manual. Expect built forearms. 😛  
New idler arm, inner/outer tie rods  
Real Grant wood steering wheel

Exhaust:  
New Tri-Y headers  
Mustangs Unlimited aluminized turbo mufflers  
New 2" pipes all the way back

Wheels:  
15" x 8" Wheel Vintiques Magnum 500s  
BF Goodrich Radial T/A white-letters(with \< 500 miles)

Fuel System:  
New gas tank w/sending unit  
New stainless steel fuel lines  
New stock fuel pump

Body:  
Driver’s door restored (new window regulator, linkages, latch assembly,  
exterior handle, sealed interior metal with POR-15)  
All panels original

Extras:  
Boxed set of subframe-connectors  
Original 1968 shop manual  
Second set of OEM door panels

The original build sheet is here, IMG is big but pretty cool. This car was one of under 5k made with this paint and interior…

[Marti Report](http://www.supermotors.net/vehicles/registry/media/449657_1)

YES the original color is Highland Green on black bucket interior - same as Steve McQueen’s 1968 GT Mustang in _Bullitt_. 😃 Not a deciding factor, but that’s what the car will go back to. Not familiar with the scene?  
[_THE_ Chase, Google Video](http://video.google.com/videoplay?docid=-2632604639835233062&q=Bullitt+car&hl=en)

Here she is.

![http://www.supermotors.net/getfile/458205/fullsize/front-3.4.jpg](http://www.supermotors.net/getfile/458205/fullsize/front-3.4.jpg)

 ![http://www.supermotors.net/getfile/458206/fullsize/302-pony.jpg](http://www.supermotors.net/getfile/458206/fullsize/302-pony.jpg)

OEM dash. Interior needs a carpet and some goodies.  
 ![http://www.supermotors.net/getfile/458207/fullsize/dashboard.jpg](http://www.supermotors.net/getfile/458207/fullsize/dashboard.jpg)

![http://www.supermotors.net/getfile/458216/fullsize/interior-passenger.jpg](http://www.supermotors.net/getfile/458216/fullsize/interior-passenger.jpg)  
Rear air extractors. Sorry 'bout the bluriness.  
 ![http://www.supermotors.net/getfile/458223/fullsize/rear-vents.jpg](http://www.supermotors.net/getfile/458223/fullsize/rear-vents.jpg)

![http://www.supermotors.net/getfile/458225/fullsize/rearseat-up.jpg](http://www.supermotors.net/getfile/458225/fullsize/rearseat-up.jpg)

![http://www.supermotors.net/getfile/458224/fullsize/rearseat-down.jpg](http://www.supermotors.net/getfile/458224/fullsize/rearseat-down.jpg)

Documentation. That’s not the price I got her for.  
 ![http://www.supermotors.net/getfile/458208/fullsize/documents.jpg](http://www.supermotors.net/getfile/458208/fullsize/documents.jpg)

If you know vintage unitbody - domestic or imported - you know this is a key area to look at:

 ![http://www.supermotors.net/getfile/458209/fullsize/driverside-doorjamb.jpg](http://www.supermotors.net/getfile/458209/fullsize/driverside-doorjamb.jpg)

![http://www.supermotors.net/getfile/458210/fullsize/passenger-door-open.jpg](http://www.supermotors.net/getfile/458210/fullsize/passenger-door-open.jpg)

 ![http://www.supermotors.net/getfile/458211/fullsize/passenger-doorjamb.jpg](http://www.supermotors.net/getfile/458211/fullsize/passenger-doorjamb.jpg)

---

<div class="post-metadata">

### Author: ![TrueBlue](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/trueblue/32/7245_2.png) [@TrueBlue](https://forums.speedlife.net/u/TrueBlue)
#### Post date: [November 19, 2006, 4:11pm UTC](https://forums.speedlife.net/t/trueblues-new-project-56k-warn/20399/2 "2006-11-19T16:11:10Z")

</div>

302, 5-sp. Tremec TKO, Holley 4-bbl.

 ![http://www.supermotors.net/getfile/458212/fullsize/engine-front.jpg](http://www.supermotors.net/getfile/458212/fullsize/engine-front.jpg)

![http://www.supermotors.net/getfile/450732/fullsize/68_mustang_24_tko.jpg](http://www.supermotors.net/getfile/450732/fullsize/68_mustang_24_tko.jpg)

![http://www.supermotors.net/getfile/458230/fullsize/underside-front.jpg](http://www.supermotors.net/getfile/458230/fullsize/underside-front.jpg)

From the rear. 2" Exhaust and 9" Ford Trac-Loc. (Or a “posi” to the uneducated.)  
 ![http://www.supermotors.net/getfile/458228/fullsize/underbody-rear.jpg](http://www.supermotors.net/getfile/458228/fullsize/underbody-rear.jpg)

Note the clean structural parts - shock towers, export, etc are rust free.  
 ![http://www.supermotors.net/getfile/458213/fullsize/engine-side.jpg](http://www.supermotors.net/getfile/458213/fullsize/engine-side.jpg)

![http://www.supermotors.net/getfile/458215/fullsize/gascap.jpg](http://www.supermotors.net/getfile/458215/fullsize/gascap.jpg)

Wilwood 4-pistons w/ proportioning valve.  
 ![http://www.supermotors.net/getfile/450731/fullsize/68_mustang_23_rh_susp.jpg](http://www.supermotors.net/getfile/450731/fullsize/68_mustang_23_rh_susp.jpg)

One of the sexiest hands-down rear-ends in all autodom.  
 ![http://www.supermotors.net/getfile/458218/fullsize/rear-3.4.jpg](http://www.supermotors.net/getfile/458218/fullsize/rear-3.4.jpg)

![http://www.supermotors.net/getfile/458219/fullsize/rear-3.4-close.jpg](http://www.supermotors.net/getfile/458219/fullsize/rear-3.4-close.jpg)

 ![http://www.supermotors.net/getfile/458220/fullsize/rear-sideshot-1.jpg](http://www.supermotors.net/getfile/458220/fullsize/rear-sideshot-1.jpg)

Spare OEM door panels and in the box, subframe connectors. Owner was an incredible guy and threw these in.  
 ![http://www.supermotors.net/getfile/458226/fullsize/trunk.jpg](http://www.supermotors.net/getfile/458226/fullsize/trunk.jpg)

Even though it was a re-paint, OEM decals. These’ll be saved.  
 ![http://www.supermotors.net/getfile/458229/fullsize/underhood-decals.jpg](http://www.supermotors.net/getfile/458229/fullsize/underhood-decals.jpg)

The end.  
 ![http://www.supermotors.net/getfile/458214/fullsize/frontend-side.jpg](http://www.supermotors.net/getfile/458214/fullsize/frontend-side.jpg)

Thanks for looking NYSpeed. :tup:

-Tom

---

<div class="post-metadata">

### Author: ![newman](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/newman/32/7569_2.png) [@newman](https://forums.speedlife.net/u/newman)
#### Post date: [November 19, 2006, 4:13pm UTC](https://forums.speedlife.net/t/trueblues-new-project-56k-warn/20399/3 "2006-11-19T16:13:06Z")

</div>

looks pretty cool. I like the shape of these cars. Always have.

put a good import motor in it and make it worthwhile. Like a nissan or bmw inline 6.

---

<div class="post-metadata">

### Author: ![Jack](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jack/32/7613_2.png) [@Jack](https://forums.speedlife.net/u/Jack)
#### Post date: [November 19, 2006, 4:13pm UTC](https://forums.speedlife.net/t/trueblues-new-project-56k-warn/20399/4 "2006-11-19T16:13:12Z")

</div>

:word:

Hottness…

---

<div class="post-metadata">

### Author: ![JustinH](https://avatars.discourse-cdn.com/v4/letter/j/9fc29f/32.png) [@JustinH](https://forums.speedlife.net/u/JustinH)
#### Post date: [November 19, 2006, 4:14pm UTC](https://forums.speedlife.net/t/trueblues-new-project-56k-warn/20399/5 "2006-11-19T16:14:16Z")

</div>

Very cool, most of those are rot boxes, that one is very clean.  
Good luck with the project.

---

<div class="post-metadata">

### Author: ![bladez](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bladez/32/7237_2.png) [@bladez](https://forums.speedlife.net/u/bladez)
#### Post date: [November 19, 2006, 4:14pm UTC](https://forums.speedlife.net/t/trueblues-new-project-56k-warn/20399/6 "2006-11-19T16:14:24Z")

</div>

Thats excellent Tom!!! I always knew you had a thing for the stangs ;). Any major plans for the car? You have an excellent base to start from, the body looks like its in amazing shape! I might have to come check this thing out :headbang:

---

<div class="post-metadata">

### Author: ![The\_Russian](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/the_russian/32/7414_2.png) [@The\_Russian](https://forums.speedlife.net/u/The_Russian)
#### Post date: [November 19, 2006, 4:17pm UTC](https://forums.speedlife.net/t/trueblues-new-project-56k-warn/20399/7 "2006-11-19T16:17:17Z")

</div>

WOW, really nice find. Always loved the fastbacks.

---

<div class="post-metadata">

### Author: ![newman](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/newman/32/7569_2.png) [@newman](https://forums.speedlife.net/u/newman)
#### Post date: [November 19, 2006, 4:17pm UTC](https://forums.speedlife.net/t/trueblues-new-project-56k-warn/20399/8 "2006-11-19T16:17:29Z")

</div>

And this is why i hate calssic car people.

OMG OEM STICKERS OMG SWEEEEEEEEEEEEEEEEEEET.

whatever. lame.

> [@TrueBlue](#):
>
> Even though it was a re-paint, OEM decals. These’ll be saved.  
> ![http://www.supermotors.net/getfile/458229/fullsize/underhood-decals.jpg](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/3X/2/6/26e38becfd3893d1d1fbb4baeb578ff5ad18546a.jpeg)

A guy at my work was all bent out of shape because the corvette he is working on had a gas cap that had a slightly silverish hue whereas the original was supposed to be white. He has probably mentioned it every day for the past 3 weeks.

---

<div class="post-metadata">

### Author: ![TrueBlue](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/trueblue/32/7245_2.png) [@TrueBlue](https://forums.speedlife.net/u/TrueBlue)
#### Post date: [November 19, 2006, 4:36pm UTC](https://forums.speedlife.net/t/trueblues-new-project-56k-warn/20399/9 "2006-11-19T16:36:19Z")

</div>

> [@bladez](#):
>
> Thats excellent Tom!!! I always knew you had a thing for the stangs ;). Any major plans for the car? You have an excellent base to start from, the body looks like its in amazing shape! I might have to come check this thing out :headbang:

Just a lot of body work and bringing it back into being straight. It needs a cowl and a driver-side floor pan. Anytime you want Ken, you owe me a ride in Cobra anyway. 🙂 Beer is on me.

---

<div class="post-metadata">

### Author: ![rj-92](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/rj-92/32/7310_2.png) [@rj-92](https://forums.speedlife.net/u/rj-92)
#### Post date: [November 19, 2006, 4:39pm UTC](https://forums.speedlife.net/t/trueblues-new-project-56k-warn/20399/10 "2006-11-19T16:39:34Z")

</div>

Aweome!! Sexy looking car. Turbo the SHO motor and drop it in that bish!! 😉

---

<div class="post-metadata">

### Author: ![psphinx81](https://avatars.discourse-cdn.com/v4/letter/p/e9a140/32.png) [@psphinx81](https://forums.speedlife.net/u/psphinx81)
#### Post date: [November 19, 2006, 5:12pm UTC](https://forums.speedlife.net/t/trueblues-new-project-56k-warn/20399/11 "2006-11-19T17:12:03Z")

</div>

wow that thing is in amazing shape :tup:

sick project :tup:

---

<div class="post-metadata">

### Author: ![Mike93](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/mike93/32/7325_2.png) [@Mike93](https://forums.speedlife.net/u/Mike93)
#### Post date: [November 19, 2006, 5:52pm UTC](https://forums.speedlife.net/t/trueblues-new-project-56k-warn/20399/12 "2006-11-19T17:52:48Z")

</div>

> [@newman](#):
>
> And this is why i hate calssic car people.
> 
> OMG OEM STICKERS OMG SWEEEEEEEEEEEEEEEEEEET.
> 
> whatever. lame.

Good thing your opinion doesn’t matter…

Tom, congrats on the new car! One of my favorites as well…seems like a decent upgrade from the SHO;)

---

<div class="post-metadata">

### Author: ![TrueBlue](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/trueblue/32/7245_2.png) [@TrueBlue](https://forums.speedlife.net/u/TrueBlue)
#### Post date: [November 19, 2006, 5:57pm UTC](https://forums.speedlife.net/t/trueblues-new-project-56k-warn/20399/13 "2006-11-19T17:57:43Z")

</div>

Still got the block from the old motor there Mike. If you want to stop in for a BS session, you’re always welcome down at my house buddy :tup:

Planning to put in an RB26DETT :snky:

---

<div class="post-metadata">

### Author: ![focusinprogress](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/focusinprogress/32/7227_2.png) [@focusinprogress](https://forums.speedlife.net/u/focusinprogress)
#### Post date: [November 19, 2006, 6:28pm UTC](https://forums.speedlife.net/t/trueblues-new-project-56k-warn/20399/14 "2006-11-19T18:28:50Z")

</div>

SWEEET. thats awesome  
next year or the year after me and my dad want to do a project car together, and this is one of the cars on the list we would like to do.

:tup:

---

<div class="post-metadata">

### Author: ![BuickGN](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/buickgn/32/7200_2.png) [@BuickGN](https://forums.speedlife.net/u/BuickGN)
#### Post date: [November 19, 2006, 6:36pm UTC](https://forums.speedlife.net/t/trueblues-new-project-56k-warn/20399/15 "2006-11-19T18:36:28Z")

</div>

> [@TrueBlue](#):
>
> Still got the block from the old motor there Mike. If you want to stop in for a BS session, you’re always welcome down at my house buddy :tup:
> 
> Planning to put in an RB26DETT :snky:

hopefully thats a joke, why ruin such a nice car with some import pos.

very nice car too, congrats on getting what u wanted.

---

<div class="post-metadata">

### Author: ![camarojoe](https://avatars.discourse-cdn.com/v4/letter/c/c67d28/32.png) [@camarojoe](https://forums.speedlife.net/u/camarojoe)
#### Post date: [November 19, 2006, 6:41pm UTC](https://forums.speedlife.net/t/trueblues-new-project-56k-warn/20399/16 "2006-11-19T18:41:06Z")

</div>

Tom… Did you finally get it delivered?  
It looks even better than you have been describing… Now get to ripping it apart so you can have it for the spring.

Start stripping it down, label all your parts and get the body soda blasted. PM suzukiriderman Jesse on NYSpeed.

Remember, it always takes longer than you anticipate…

Maybe I’ll have to take a swing out that way and check it out.

---

<div class="post-metadata">

### Author: ![taurusho](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/taurusho/32/7184_2.png) [@taurusho](https://forums.speedlife.net/u/taurusho)
#### Post date: [November 19, 2006, 7:08pm UTC](https://forums.speedlife.net/t/trueblues-new-project-56k-warn/20399/17 "2006-11-19T19:08:48Z")

</div>

:tup: This was my dad’s first car…

---

<div class="post-metadata">

### Author: ![LeetWoah](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/leetwoah/32/5013_2.png) [@LeetWoah](https://forums.speedlife.net/u/LeetWoah)
#### Post date: [November 19, 2006, 7:25pm UTC](https://forums.speedlife.net/t/trueblues-new-project-56k-warn/20399/18 "2006-11-19T19:25:47Z")

</div>

nice buy man

have fun with it

---

<div class="post-metadata">

### Author: ![TrueBlue](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/trueblue/32/7245_2.png) [@TrueBlue](https://forums.speedlife.net/u/TrueBlue)
#### Post date: [November 19, 2006, 7:32pm UTC](https://forums.speedlife.net/t/trueblues-new-project-56k-warn/20399/19 "2006-11-19T19:32:08Z")

</div>

> [@camarojoe](#):
>
> Tom… Did you finally get it delivered?

I did Joe :tup: The semi dropped it off on a side street so I drove it back through the village with no plates, no registration, and no lights - I found the switch when I got back to the house :lol: Cop pulled into my driveway after I got out. :hay:

Start tearing it down in a few weeks here.

---

<div class="post-metadata">

### Author: ![camarojoe](https://avatars.discourse-cdn.com/v4/letter/c/c67d28/32.png) [@camarojoe](https://forums.speedlife.net/u/camarojoe)
#### Post date: [November 19, 2006, 7:34pm UTC](https://forums.speedlife.net/t/trueblues-new-project-56k-warn/20399/20 "2006-11-19T19:34:40Z")

</div>

> [@TrueBlue](#):
>
> I did Joe :tup: The semi dropped it off on a side street so I drove it back through the village with no plates, no registration, and no lights - I found the switch when I got back to the house :lol: Cop pulled into my driveway after I got out. :hay:
> 
> Start tearing it down in a few weeks here.

haha, sweet. Like an early Christmas present :tup:

You sleeping on the garage or the car tonight? 🙂

[Next page](https://forums.speedlife.net/t/trueblues-new-project-56k-warn/20399.md?page=2)
