# Turbo D16 part out **URL:** \ **Category:** Classifieds\ **Created:** [July 1, 2012, 7:28pm UTC](https://forums.speedlife.net/t/turbo-d16-part-out/224299 "2012-07-01T19:28:22Z")\ **Posts on this page:** 10\ **Page:** 1
**Author:** ![turbominime4door](https://avatars.discourse-cdn.com/v4/letter/t/bbe5ce/32.png) [@turbominime4door](https://forums.speedlife.net/u/turbominime4door)\ **Post date:** [July 1, 2012, 7:28pm UTC](https://forums.speedlife.net/t/turbo-d16-part-out/224299/1 "2012-07-01T19:28:22Z")
Well I have the oppurtunity to get a rsx type s for a awesome deal,but in order to do so i will need to part out my current project: Parts I have for sale:all have less than 5miles on them. Turbo Parts: Garrett .63 exhaust/70 a/r turbo Custom built top mount turbo manifold(built by zero5672) 3in downpipe ss(built by zero5672) custom built fmic(thing is a monster) 3in aluminum charge piping vibrant couplers and t bolt clamps stealhmode return oil line -10an drain line-braided line with black vibrant fittings precision 880cc injectors tial mv-s wastegate with dumptube tube knock off hks ssqv bov Engine Parts: D16y7 block-Notched for Eagle rods Eagle H beam rods Vitara pistons ACL race spec rod bearings D16y8 oil pan with -10an bung welded in d16z6 head-Freshly rebuilt-Port and polished Arp headstuds Brand new oil pump and water pump-Oem honda Gates timing belt Vision Motorsports adjustable cam gear Skunk2 pro series intake manifold Skunk2 Alpha series 70mm tb CJ Harness tucked wiring harness-has plug so can swap between stock map sensor and 3 bar,also has apexi avcr wired into it. Trans: D16y8 trans with 50k Misc Parts: AEM uego Skunk2 rad hoses Skunk2 Black series oil cap Skunk2 Radiator cap Skunk2 vtec solenoid cover black series Skunk2 black series lug nuts Downstar Inc D series bolt kit Downstar Inc Motor mount bolts Downstar Inc Clutch line Inline Earls Fuel Filter with -6an lines Walbro 255lph fuel pump Apexi avcr electronic boost controller with solenoid Brand new axles DEI heat wrap Catch can with -10an lines and fittings for back of block Freshly sandblasted valve cover Rims: HSR type c in silver with Falken azenis-tires will need to be replaced Suspension; Skunk2 Upper control arms could use a sandblasting-Have new skunk2 ball joints and also have a extra upper control arm with a new bushing I will have pics up Tuesday,I didnt list prices due to the fact this is just me testing the waters to see if I can sell the parts to get the rsx.Make me offers worst I can say is no. Either call or txt at 716 353-6209 ---
**Author:** ![honda4life](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/honda4life/32/5300_2.png) [@honda4life](https://forums.speedlife.net/u/honda4life)\ **Post date:** [July 1, 2012, 8:12pm UTC](https://forums.speedlife.net/t/turbo-d16-part-out/224299/2 "2012-07-01T20:12:13Z")
What you want for the wideband? ---
**Author:** ![turbominime4door](https://avatars.discourse-cdn.com/v4/letter/t/bbe5ce/32.png) [@turbominime4door](https://forums.speedlife.net/u/turbominime4door)\ **Post date:** [July 2, 2012, 4:37am UTC](https://forums.speedlife.net/t/turbo-d16-part-out/224299/3 "2012-07-02T04:37:35Z")
I just wired it into my car to see make sure it worked but other then that its basically brand new,I can do 180 dhipped ---------- Post added at 07:37 AM ---------- Previous post was at 07:36 AM ---------- Also forgot to add a chipped p28 ecu and can get any basemap put on for buyer ---
**Author:** ![honda4life](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/honda4life/32/5300_2.png) [@honda4life](https://forums.speedlife.net/u/honda4life)\ **Post date:** [July 2, 2012, 12:37pm UTC](https://forums.speedlife.net/t/turbo-d16-part-out/224299/4 "2012-07-02T12:37:56Z")
> [@turbominime4door](#): > > I just wired it into my car to see make sure it worked but other then that its basically brand new,I can do 180 dhipped > > ---------- Post added at 07:37 AM ---------- Previous post was at 07:36 AM ---------- > > Also forgot to add a chipped p28 ecu and can get any basemap put on for buyer Nm I if your price was lower I would of grabed it, thank you anyways ---
**Author:** ![turbominime4door](https://avatars.discourse-cdn.com/v4/letter/t/bbe5ce/32.png) [@turbominime4door](https://forums.speedlife.net/u/turbominime4door)\ **Post date:** [July 2, 2012, 4:48pm UTC](https://forums.speedlife.net/t/turbo-d16-part-out/224299/5 "2012-07-02T16:48:04Z")
Make me a offer on it ---
**Author:** ![budsdubbin](https://avatars.discourse-cdn.com/v4/letter/b/d2c977/32.png) [@budsdubbin](https://forums.speedlife.net/u/budsdubbin)\ **Post date:** [July 3, 2012, 3:32pm UTC](https://forums.speedlife.net/t/turbo-d16-part-out/224299/6 "2012-07-03T15:32:54Z")
What garret series is that? turbine housing doesn’t really tell me much of anything aswell as the turbine housing which they use in many of their chassis. I’m assuming journal bearing t3/t4 ---
**Author:** ![Radyjr](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/radyjr/32/5092_2.png) [@Radyjr](https://forums.speedlife.net/u/Radyjr)\ **Post date:** [July 11, 2012, 8:44am UTC](https://forums.speedlife.net/t/turbo-d16-part-out/224299/7 "2012-07-11T08:44:18Z")
Pics for Top mount manifold, turbo, and Injectors? ---
**Author:** ![turbominime4door](https://avatars.discourse-cdn.com/v4/letter/t/bbe5ce/32.png) [@turbominime4door](https://forums.speedlife.net/u/turbominime4door)\ **Post date:** [July 12, 2012, 6:56am UTC](https://forums.speedlife.net/t/turbo-d16-part-out/224299/8 "2012-07-12T06:56:31Z")
Shoot me a txt and 716 353-6209 and I can send pics,I been super busy lately my wife is pregnant and due next month so been busy ---
**Author:** ![yunvme666](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/yunvme666/32/5065_2.png) [@yunvme666](https://forums.speedlife.net/u/yunvme666)\ **Post date:** [July 12, 2012, 8:10am UTC](https://forums.speedlife.net/t/turbo-d16-part-out/224299/9 "2012-07-12T08:10:40Z")
here man i actually have a pic or two from when cory was making that manifold … one just tacked, and one fully welded… ---
**Author:** ![turbominime4door](https://avatars.discourse-cdn.com/v4/letter/t/bbe5ce/32.png) [@turbominime4door](https://forums.speedlife.net/u/turbominime4door)\ **Post date:** [July 12, 2012, 11:55am UTC](https://forums.speedlife.net/t/turbo-d16-part-out/224299/10 "2012-07-12T11:55:41Z")
Thanks alot man for posting them up,Im not runing that turbo any more but mani still looks the same except has a tial mv-s wastegate