# turbo manifolds: cast verus tubular

**URL:** <https://forums.speedlife.net/t/turbo-manifolds-cast-verus-tubular/19095>\
**Category:** NYSpeed Automotive\
**Created:** [October 21, 2006, 12:01pm UTC](https://forums.speedlife.net/t/turbo-manifolds-cast-verus-tubular/19095 "2006-10-21T12:01:58Z")\
**Posts on this page:** 7\
**Page:** 2

<div class="post-metadata">

**Author:** ![Nikuk](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nikuk/32/7254_2.png) [@Nikuk](https://forums.speedlife.net/u/Nikuk)\
**Post date:** [October 21, 2006, 3:22pm UTC](https://forums.speedlife.net/t/turbo-manifolds-cast-verus-tubular/19095/21 "2006-10-21T15:22:21Z")

</div>

cossie services both, iirc.

> [@HotRodKid](#):
>
> i thought the cosworths were duratec motors ?
> 
> nicks zetec powered … will they swap ?

and no, most D20 D23 parts will not swap

---

<div class="post-metadata">

**Author:** ![Tkklemann](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/tkklemann/32/7298_2.png) [@Tkklemann](https://forums.speedlife.net/u/Tkklemann)\
**Post date:** [October 21, 2006, 3:31pm UTC](https://forums.speedlife.net/t/turbo-manifolds-cast-verus-tubular/19095/22 "2006-10-21T15:31:00Z")

</div>

> [@HotRodKid](#):
>
> im gonna have to say no to that
> 
> look at the quality on the wastegate … the nearest bolt hole is WAY of center in its mounting boss … wtf is that ?
> 
> if they gant drill a bolt hole centered, i wouldnt trust them to use quality materials
> 
> same w/ the wastegate flange on the mani itself … 2 are right on the edge of the flange

You have obviously never really worked in a heavy manufacturing environment have you…

Judging that piece because everything is not centered in that machined flat is rediculous.

And, if you would like, I can go and take a picture of my 4G63 from my Evo and show you that damn near every machied feature in the head is not dead centered in each of the cast bosses. Shit, for that matter, go take a look at virtually ANY motor out of ANY car and you will see that.

---

<div class="post-metadata">

**Author:** ![focusinprogress](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/focusinprogress/32/7227_2.png) [@focusinprogress](https://forums.speedlife.net/u/focusinprogress)\
**Post date:** [October 21, 2006, 4:00pm UTC](https://forums.speedlife.net/t/turbo-manifolds-cast-verus-tubular/19095/23 "2006-10-21T16:00:20Z")

</div>

> [@Nikuk](#):
>
> cossie services both, iirc.and no, most D20 D23 parts will not swap

cossie makes the powerwerks supercharger kit for zetecs, and con rods. thats it lol

---

<div class="post-metadata">

**Author:** ![HotRodKid](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/hotrodkid/32/7609_2.png) [@HotRodKid](https://forums.speedlife.net/u/HotRodKid)\
**Post date:** [October 21, 2006, 4:07pm UTC](https://forums.speedlife.net/t/turbo-manifolds-cast-verus-tubular/19095/24 "2006-10-21T16:07:46Z")

</div>

> [@Tkklemann](#):
>
> Judging that piece because everything is not centered in that machined flat is rediculous.
> 
> And, if you would like, I can go and take a picture of my 4G63 from my Evo and show you that damn near every machied feature in the head is not dead centered in each of the cast bosses. Shit, for that matter, go take a look at virtually ANY motor out of ANY car and you will see that.

theres also a big difference between “not dead center” and “on the very edge”

i dont expect the holes to be perfectly centered, but i would prefer my bolt holes to be more then an 1/8 inch from the edge

ive seen enough dsm’s to know that they dont do that shit on production parts … maybe here or there … but not on 5 holes out of 6 that hold any certian part on

---

<div class="post-metadata">

**Author:** ![layzie](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/layzie/32/7599_2.png) [@layzie](https://forums.speedlife.net/u/layzie)\
**Post date:** [October 22, 2006, 7:03pm UTC](https://forums.speedlife.net/t/turbo-manifolds-cast-verus-tubular/19095/25 "2006-10-22T19:03:56Z")

</div>

equal length tubular ftw

---

<div class="post-metadata">

**Author:** ![Carnut](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/carnut/32/7590_2.png) [@Carnut](https://forums.speedlife.net/u/Carnut)\
**Post date:** [October 22, 2006, 7:47pm UTC](https://forums.speedlife.net/t/turbo-manifolds-cast-verus-tubular/19095/26 "2006-10-22T19:47:47Z")

</div>

> [@layzie](#):
>
> equal length tubular ftw

his sig says it all

---

<div class="post-metadata">

**Author:** ![layzie](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/layzie/32/7599_2.png) [@layzie](https://forums.speedlife.net/u/layzie)\
**Post date:** [October 22, 2006, 9:10pm UTC](https://forums.speedlife.net/t/turbo-manifolds-cast-verus-tubular/19095/27 "2006-10-22T21:10:14Z")

</div>

> [@Carnut](#):
>
> his sig says it all

:tup:

[Previous page](https://forums.speedlife.net/t/turbo-manifolds-cast-verus-tubular/19095.md?page=1)