# turbo timer not working

**URL:** https://forums.speedlife.net/t/turbo-timer-not-working/104411
**Category:** SON240sx Automotive
**Created:** [March 11, 2007, 10:47pm UTC](https://forums.speedlife.net/t/turbo-timer-not-working/104411 "2007-03-11T22:47:06Z")
**Posts on this page:** 5
**Page:** 1

<div class="post-metadata">

### Author: ![Mista\_Sparkoh](https://avatars.discourse-cdn.com/v4/letter/m/3bc359/32.png) [@Mista\_Sparkoh](https://forums.speedlife.net/u/Mista_Sparkoh)
#### Post date: [March 11, 2007, 10:47pm UTC](https://forums.speedlife.net/t/turbo-timer-not-working/104411/1 "2007-03-11T22:47:06Z")

</div>

I have a Blitz Voiced Guided Turbo Timer which has the main harness running through the ignition and another harness for the hand brake and speed sensor (which I did not hook up). The first time I installed it, it ran perfect. Since then I tried to clean up the look by tucking the harness away. I unplugged it when I did that and after I finished plugged it back in and it doesn’t work. I can turn on the timer in ignition but when I shut the ignition off the timer shuts off as well. I checked and re-checked the harness connection and it’s connected properly, but I still can’t seem to find the problem.  
anyone know what the problem could be?  
Thanks

---

<div class="post-metadata">

### Author: ![Oni-Kyan](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/oni-kyan/32/5503_2.png) [@Oni-Kyan](https://forums.speedlife.net/u/Oni-Kyan)
#### Post date: [March 11, 2007, 11:16pm UTC](https://forums.speedlife.net/t/turbo-timer-not-working/104411/2 "2007-03-11T23:16:38Z")

</div>

sounds like your 12volt continus power wire what did you wire that to and does whateever you wired that to work still? maybe check fuses see if any are burned out.  
Mael

---

<div class="post-metadata">

### Author: ![Mista\_Sparkoh](https://avatars.discourse-cdn.com/v4/letter/m/3bc359/32.png) [@Mista\_Sparkoh](https://forums.speedlife.net/u/Mista_Sparkoh)
#### Post date: [March 12, 2007, 7:31am UTC](https://forums.speedlife.net/t/turbo-timer-not-working/104411/3 "2007-03-12T07:31:25Z")

</div>

I bought a timer harness so installation was a snap. Where should I check for the blown fuses?

---

<div class="post-metadata">

### Author: ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)
#### Post date: [March 14, 2007, 4:50pm UTC](https://forums.speedlife.net/t/turbo-timer-not-working/104411/4 "2007-03-14T16:50:00Z")

</div>

Im guessing then, that you dont know where the harness takes its power from?

---

<div class="post-metadata">

### Author: ![Cal](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/cal/32/5505_2.png) [@Cal](https://forums.speedlife.net/u/Cal)
#### Post date: [March 14, 2007, 4:52pm UTC](https://forums.speedlife.net/t/turbo-timer-not-working/104411/5 "2007-03-14T16:52:09Z")

</div>

The wire for the hand brake is not connected? In that case there is your problem.