# turbos **URL:** \ **Category:** PittSpeed Automotive\ **Created:** [June 26, 2007, 7:18pm UTC](https://forums.speedlife.net/t/turbos/190786 "2007-06-26T19:18:08Z")\ **Posts on this page:** 1\ **Showing post:** 29
**Author:** ![69camaro](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/69camaro/32/6046_2.png) [@69camaro](https://forums.speedlife.net/u/69camaro)\ **Post date:** [July 4, 2007, 7:51pm UTC](https://forums.speedlife.net/t/turbos/190786/29 "2007-07-04T19:51:40Z")
> [@The infamous punch](https://forums.speedlife.net/t/the-infamous-punch/31049/38): > > The ebay and master whatever T70’s are 60mm inducers, thats why they’re so cheap. > > You’re going to want to run something with a .80 or larger A/R on a motor like that. > > I run a .69A/R “P” trim 70 with a .75A/R cold side. I wish I would have gotten the Q wheel even tho it’s bigger it’s lighter. those ebay turbos are not master power they are xs power which are chinese,those are the ones which are 60mm. i have done a lot of searches on master power and all the people who have them dont have problems. the turbo i was looking at has a turbine wheel exducer 64.26mm, major 73.91mm, compressor wheel exducer 69.09mm, major 90.93mm, turbine housing a/r .68 with a t4 inlet, compressor housing a/r .70 with a 4 inch inlet. do you think this is a big enough turbo. i think it is a good price at $590 --- _[View the full topic](https://forums.speedlife.net/t/turbos/190786)._