# turning rotors? **URL:** \ **Category:** NYSpeed Automotive\ **Created:** [July 24, 2007, 5:12am UTC](https://forums.speedlife.net/t/turning-rotors/32861 "2007-07-24T05:12:11Z")\ **Posts on this page:** 13\ **Page:** 1
**Author:** ![ultradriver10000](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ultradriver10000/32/7397_2.png) [@ultradriver10000](https://forums.speedlife.net/u/ultradriver10000)\ **Post date:** [July 24, 2007, 5:12am UTC](https://forums.speedlife.net/t/turning-rotors/32861/1 "2007-07-24T05:12:11Z")
Does anyone know a shop that will turn cross drilled/cut rotors? If so lemme know! thanks ---
**Author:** ![91MR2](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/91mr2/32/7217_2.png) [@91MR2](https://forums.speedlife.net/u/91MR2)\ **Post date:** [July 24, 2007, 7:20am UTC](https://forums.speedlife.net/t/turning-rotors/32861/2 "2007-07-24T07:20:50Z")
Try Skrapper. ---
**Author:** ![Phoenix\_305](https://avatars.discourse-cdn.com/v4/letter/p/977dab/32.png) [@Phoenix\_305](https://forums.speedlife.net/u/Phoenix_305)\ **Post date:** [July 24, 2007, 8:09am UTC](https://forums.speedlife.net/t/turning-rotors/32861/3 "2007-07-24T08:09:52Z")
I wouldnt try that. The teeth of the brake lathe get caught in the cuts and snap off. ---
**Author:** ![66impalass](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/66impalass/32/7429_2.png) [@66impalass](https://forums.speedlife.net/u/66impalass)\ **Post date:** [July 24, 2007, 8:23am UTC](https://forums.speedlife.net/t/turning-rotors/32861/4 "2007-07-24T08:23:18Z")
[quote=“Phoenix 305,post:3,topic:32861"”] I wouldnt try that. The teeth of the brake lathe get caught in the cuts and snap off. [/quote] not true, that is if the tech is a complete idiot and tries to turn the rotor at a normal speed, it will be find if you take at most 3/1000ths of an inch and turn at like 1/4 speed. ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\ **Post date:** [July 24, 2007, 8:53am UTC](https://forums.speedlife.net/t/turning-rotors/32861/5 "2007-07-24T08:53:41Z")
PHILS QUALITY AUTO SERVICE Clinton Street in West Seneca 674-8110 ---
**Author:** ![Jskrapper](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jskrapper/32/7570_2.png) [@Jskrapper](https://forums.speedlife.net/u/Jskrapper)\ **Post date:** [July 24, 2007, 9:04am UTC](https://forums.speedlife.net/t/turning-rotors/32861/6 "2007-07-24T09:04:48Z")
I have turned Xdrilled/slotted before. Just gotta take of smaller amounts at slower speeds just as 66ss stated. I can do them, but they take longer than regular rotors. I hold no responsibility if they are cheap and chip. (never happened yet) ---
**Author:** ![ultradriver10000](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ultradriver10000/32/7397_2.png) [@ultradriver10000](https://forums.speedlife.net/u/ultradriver10000)\ **Post date:** [July 24, 2007, 9:08am UTC](https://forums.speedlife.net/t/turning-rotors/32861/7 "2007-07-24T09:08:44Z")
this is for a guy i work with so i’ll let him know…jskrapper what would you charge? where are you located? ---
**Author:** ![Jskrapper](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jskrapper/32/7570_2.png) [@Jskrapper](https://forums.speedlife.net/u/Jskrapper)\ **Post date:** [July 24, 2007, 10:29am UTC](https://forums.speedlife.net/t/turning-rotors/32861/8 "2007-07-24T10:29:36Z")
Probably 15 a peice instead of the usual 10. Just because they take a little longer. I will be able to tell better once they are here. 577 englewood ave. Town of Tonawanda. ---
**Author:** ![Fry](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/fry/32/7284_2.png) [@Fry](https://forums.speedlife.net/u/Fry)\ **Post date:** [July 24, 2007, 10:58am UTC](https://forums.speedlife.net/t/turning-rotors/32861/9 "2007-07-24T10:58:12Z")
This isn’t for the 96 grand am in your profile is it? If it is just toss em and spend $12 a pop on new non-drilled rotors. They’re better for street applications anyways. It’s not like you get a lot of brake dust film buildup under the pads during street braking. (Removing that film is what slots/holes are for.) ---
**Author:** ![nitroinsane](https://avatars.discourse-cdn.com/v4/letter/n/d26b3c/32.png) [@nitroinsane](https://forums.speedlife.net/u/nitroinsane)\ **Post date:** [July 24, 2007, 5:17pm UTC](https://forums.speedlife.net/t/turning-rotors/32861/10 "2007-07-24T17:17:06Z")
i can get um done not at skrappers rate though. he so cheap and easy ---
**Author:** ![RedSoxDude19](https://avatars.discourse-cdn.com/v4/letter/r/919ad9/32.png) [@RedSoxDude19](https://forums.speedlife.net/u/RedSoxDude19)\ **Post date:** [July 24, 2007, 7:22pm UTC](https://forums.speedlife.net/t/turning-rotors/32861/11 "2007-07-24T19:22:51Z")
Smukalls Performance: 824-7628 ---
**Author:** ![Paulo](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/paulo/32/7328_2.png) [@Paulo](https://forums.speedlife.net/u/Paulo)\ **Post date:** [July 25, 2007, 1:54am UTC](https://forums.speedlife.net/t/turning-rotors/32861/12 "2007-07-25T01:54:30Z")
[quote=“BikerFry,post:9,topic:32861"”] This isn’t for the 96 grand am in your profile is it? If it is just toss em and spend $12 a pop on new non-drilled rotors. They’re better for street applications anyways. It’s not like you get a lot of brake dust film buildup under the pads during street braking. (Removing that film is what slots/holes are for.) [/quote] he doesn’t have that anymore, he drives a c5, but he said this is for someone that he works with. ---
**Author:** ![nappy1380](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nappy1380/32/7502_2.png) [@nappy1380](https://forums.speedlife.net/u/nappy1380)\ **Post date:** [July 25, 2007, 5:53pm UTC](https://forums.speedlife.net/t/turning-rotors/32861/13 "2007-07-25T17:53:57Z")
maybe for the impala??