# TW: SBF 331 Stroker **URL:** \ **Category:** Classifieds\ **Created:** [June 6, 2010, 2:35pm UTC](https://forums.speedlife.net/t/tw-sbf-331-stroker/252509 "2010-06-06T14:35:27Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![94Gt5.0](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/94gt5.0/32/6377_2.png) [@94Gt5.0](https://forums.speedlife.net/u/94Gt5.0)\ **Post date:** [June 6, 2010, 2:35pm UTC](https://forums.speedlife.net/t/tw-sbf-331-stroker/252509/1 "2010-06-06T14:35:27Z")
Thinking of selling my 331 Stroker setup and moving on to something larger. Has been an excellent motor and has not given me any problems. This motor went [11.81@113](mailto:11.81@113) with a stock suspension, AOD-E 94 Gt without being dyno tuned. Id say there is a little bit more in it with a spot-on tune. Heres the rundown of the motor. Stock block(Bored, honed, decked to .0) JE Pistons Pt#170856 .040 Bore 3.250 Stroke .0045 Wal/CLR Rings Top .064- Sec, .064- Oil .218- PINS .927/2.750 Eagle Rods Pt#SIR5400CB-Bearings Pt#CLV-CB1227P Scat Crank-9000 Series Custom ground camshaft Roller timing set High Volume Oil Pump Ported Edlebrock Heads(1.90/1.60 valves) Unported Edlebrock RPMII Upper/Lower Intake Edlebrock 70mm T/B & Adapter(for 94-95 models). ProFlow Electric Waterpump March Underdrive pullies Might part with headers if interested(MAC 1-3/4’’ Longtubes, Cer coated) $3600 With everything(headers etc) $3350 Everything minus headers $3000 For longblock minus Intake/ T/B Quick pic of it, sorry its a bit dusty: ![http://i290.photobucket.com/albums/ll257/Allgo5oh/94MustangProject006.jpg](http://i290.photobucket.com/albums/ll257/Allgo5oh/94MustangProject006.jpg) ---
**Author:** ![88slowmarro](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/88slowmarro/32/6339_2.png) [@88slowmarro](https://forums.speedlife.net/u/88slowmarro)\ **Post date:** [June 6, 2010, 2:43pm UTC](https://forums.speedlife.net/t/tw-sbf-331-stroker/252509/2 "2010-06-06T14:43:54Z")
i knew the lt1 had ya scared lol good luck man ---
**Author:** ![94Gt5.0](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/94gt5.0/32/6377_2.png) [@94Gt5.0](https://forums.speedlife.net/u/94Gt5.0)\ **Post date:** [June 6, 2010, 2:46pm UTC](https://forums.speedlife.net/t/tw-sbf-331-stroker/252509/3 "2010-06-06T14:46:52Z")
:lol Not scared, just time for somethin new man! ---
**Author:** ![88slowmarro](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/88slowmarro/32/6339_2.png) [@88slowmarro](https://forums.speedlife.net/u/88slowmarro)\ **Post date:** [June 6, 2010, 2:57pm UTC](https://forums.speedlife.net/t/tw-sbf-331-stroker/252509/4 "2010-06-06T14:57:57Z")
i know ---
**Author:** ![PJB](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pjb/32/6389_2.png) [@PJB](https://forums.speedlife.net/u/PJB)\ **Post date:** [June 6, 2010, 3:35pm UTC](https://forums.speedlife.net/t/tw-sbf-331-stroker/252509/5 "2010-06-06T15:35:21Z")
so this is worth $3600 but my complete running car with a 500 mile motor is only worth $4k? WTF? ---
**Author:** ![94Gt5.0](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/94gt5.0/32/6377_2.png) [@94Gt5.0](https://forums.speedlife.net/u/94Gt5.0)\ **Post date:** [June 6, 2010, 3:39pm UTC](https://forums.speedlife.net/t/tw-sbf-331-stroker/252509/6 "2010-06-06T15:39:52Z")
> [@Two strokes on the streets of baltimore](https://forums.speedlife.net/t/two-strokes-on-the-streets-of-baltimore/32366/39): > > so this is worth $3600 but my complete running car with a 500 mile motor is only worth $4k? WTF? Do you really not know how this works Paul? Holy shit. Youd make MORE money parting your car out than you would selling it as a whole. This motor when built was over $6400(not including the intake assy which was $1200). ---
**Author:** ![PJB](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pjb/32/6389_2.png) [@PJB](https://forums.speedlife.net/u/PJB)\ **Post date:** [June 6, 2010, 3:42pm UTC](https://forums.speedlife.net/t/tw-sbf-331-stroker/252509/7 "2010-06-06T15:42:07Z")
Im not saying your shit isnt worth it, Im just saying I cant believe how people low ball shit. Even as a roller my car or yours would be worth more than $400 (the difference in the price of your motor and what everybody says my car is worth). ---
**Author:** ![94Gt5.0](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/94gt5.0/32/6377_2.png) [@94Gt5.0](https://forums.speedlife.net/u/94Gt5.0)\ **Post date:** [June 6, 2010, 3:47pm UTC](https://forums.speedlife.net/t/tw-sbf-331-stroker/252509/8 "2010-06-06T15:47:47Z")
You could get a decent amount for a clean fox roller, def more than $400!! ---
**Author:** ![PJB](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pjb/32/6389_2.png) [@PJB](https://forums.speedlife.net/u/PJB)\ **Post date:** [June 6, 2010, 3:50pm UTC](https://forums.speedlife.net/t/tw-sbf-331-stroker/252509/9 "2010-06-06T15:50:16Z")
> [@My Father's hott little DIY](https://forums.speedlife.net/t/my-fathers-hott-little-diy/32409/24): > > You could get a decent amount for a clean fox roller, def more than $400!! I know. Thats what Im saying. People keep saying my car is only worth $4k running though so Im just factoring in the cost of the motor and what the motor should be worth (Id think mine would be worth what yours is, especially since its got such low mileage) and the difference. ---
**Author:** ![zee\_oh\_sex](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/zee_oh_sex/32/6451_2.png) [@zee\_oh\_sex](https://forums.speedlife.net/u/zee_oh_sex)\ **Post date:** [June 6, 2010, 5:23pm UTC](https://forums.speedlife.net/t/tw-sbf-331-stroker/252509/10 "2010-06-06T17:23:48Z")
Adam your heads only have 1.90 intake valves??? I thought all those performers had 1.94’s. No shit! ---
**Author:** ![kramerbuccs24](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/kramerbuccs24/32/6397_2.png) [@kramerbuccs24](https://forums.speedlife.net/u/kramerbuccs24)\ **Post date:** [June 6, 2010, 7:53pm UTC](https://forums.speedlife.net/t/tw-sbf-331-stroker/252509/11 "2010-06-06T19:53:48Z")
paul shut the fuckkkkk upppppp ---
**Author:** ![94Gt5.0](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/94gt5.0/32/6377_2.png) [@94Gt5.0](https://forums.speedlife.net/u/94Gt5.0)\ **Post date:** [June 6, 2010, 7:56pm UTC](https://forums.speedlife.net/t/tw-sbf-331-stroker/252509/12 "2010-06-06T19:56:43Z")
> [@zee oh sex"](#): > > Adam your heads only have 1.90 intake valves??? I thought all those performers had 1.94’s. No shit! Nah, they the hella dumpy 1.90’s! > [@Race Wars are ON!](https://forums.speedlife.net/t/race-wars-are-on/31552/80): > > paul shut the fuckkkkk upppppp :lmao ---
**Author:** ![Wayne64SS](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/wayne64ss/32/6365_2.png) [@Wayne64SS](https://forums.speedlife.net/u/Wayne64SS)\ **Post date:** [June 6, 2010, 8:01pm UTC](https://forums.speedlife.net/t/tw-sbf-331-stroker/252509/13 "2010-06-06T20:01:18Z")
PJB, so help me god if you don’t STFU about your dumpy car. Sell it or don’t. Either way STFU. Adam, cleaned this thread up for you man. GLWS, motor sure ran good!!! ---
**Author:** ![SSmokinn\_SS](https://avatars.discourse-cdn.com/v4/letter/s/ec9cab/32.png) [@SSmokinn\_SS](https://forums.speedlife.net/u/SSmokinn_SS)\ **Post date:** [June 6, 2010, 8:11pm UTC](https://forums.speedlife.net/t/tw-sbf-331-stroker/252509/14 "2010-06-06T20:11:02Z")
swapping in a LSX huh? smart move! good luck with sale! This motor would be badass in my dads fast back. Too bad he is too cheap for it! ---
**Author:** ![94Gt5.0](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/94gt5.0/32/6377_2.png) [@94Gt5.0](https://forums.speedlife.net/u/94Gt5.0)\ **Post date:** [June 6, 2010, 8:27pm UTC](https://forums.speedlife.net/t/tw-sbf-331-stroker/252509/15 "2010-06-06T20:27:28Z")
> [@Thoughts on these rear bumpers.](https://forums.speedlife.net/t/thoughts-on-these-rear-bumpers/32436/16): > > PJB, so help me god if you don’t STFU about your dumpy car. Sell it or don’t. Either way STFU. Adam, cleaned this thread up for you man. GLWS, motor sure ran good!!! :rofl thanks bro. > [@Race Wars are ON!](https://forums.speedlife.net/t/race-wars-are-on/31552/84): > > swapping in a LSX huh? smart move! > > good luck with sale! This motor would be badass in my dads fast back. Too bad he is too cheap for it! Haha no LSx, dont wanna go slower!! :tongue Let me know if your old man is interested. Im sure he’d be doing a carb setup so he wouldnt need any of the EFI shit, or the headers… We could work somethin out! ---
**Author:** ![SSmokinn\_SS](https://avatars.discourse-cdn.com/v4/letter/s/ec9cab/32.png) [@SSmokinn\_SS](https://forums.speedlife.net/u/SSmokinn_SS)\ **Post date:** [June 6, 2010, 8:36pm UTC](https://forums.speedlife.net/t/tw-sbf-331-stroker/252509/16 "2010-06-06T20:36:43Z")
> [@Thoughts on these rear bumpers.](https://forums.speedlife.net/t/thoughts-on-these-rear-bumpers/32436/21): > > :rofl thanks bro. > > Haha no LSx, dont wanna go slower!! :tongue > > Let me know if your old man is interested. Im sure he’d be doing a carb setup so he wouldnt need any of the EFI shit, or the headers… We could work somethin out! well, are you interested in a cammed 289??? ---
**Author:** ![94Gt5.0](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/94gt5.0/32/6377_2.png) [@94Gt5.0](https://forums.speedlife.net/u/94Gt5.0)\ **Post date:** [June 6, 2010, 8:39pm UTC](https://forums.speedlife.net/t/tw-sbf-331-stroker/252509/17 "2010-06-06T20:39:04Z")
> [@Thoughts on these rear bumpers.](https://forums.speedlife.net/t/thoughts-on-these-rear-bumpers/32436/24): > > well, are you interested in a cammed 289??? Eh, not so much, sorry mang lol. ---
**Author:** ![Mk4\_30R\_Ban](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/mk4_30r_ban/32/6347_2.png) [@Mk4\_30R\_Ban](https://forums.speedlife.net/u/Mk4_30R_Ban)\ **Post date:** [June 6, 2010, 8:42pm UTC](https://forums.speedlife.net/t/tw-sbf-331-stroker/252509/18 "2010-06-06T20:42:42Z")
bump for the car never running again! ---
**Author:** ![big\_red](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/big_red/32/6328_2.png) [@big\_red](https://forums.speedlife.net/u/big_red)\ **Post date:** [June 6, 2010, 8:48pm UTC](https://forums.speedlife.net/t/tw-sbf-331-stroker/252509/19 "2010-06-06T20:48:07Z")
> [@WTB: Header for a B18](https://forums.speedlife.net/t/wtb-header-for-a-b18/32335/9): > > bump for the car never running again! just thinking the same LOL GLWS wish it was in my budget for the rustang ---
**Author:** ![zee\_oh\_sex](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/zee_oh_sex/32/6451_2.png) [@zee\_oh\_sex](https://forums.speedlife.net/u/zee_oh_sex)\ **Post date:** [June 6, 2010, 8:54pm UTC](https://forums.speedlife.net/t/tw-sbf-331-stroker/252509/20 "2010-06-06T20:54:53Z")
> [@WTB: Header for a B18](https://forums.speedlife.net/t/wtb-header-for-a-b18/32335/9): > > bump for the car never running again! :rofl [Next page](https://forums.speedlife.net/t/tw-sbf-331-stroker/252509.md?page=2)