# Tweeter Problem Question **URL:** \ **Category:** NYSpeed Automotive\ **Created:** [April 29, 2006, 7:52am UTC](https://forums.speedlife.net/t/tweeter-problem-question/11418 "2006-04-29T07:52:27Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![akkord](https://avatars.discourse-cdn.com/v4/letter/a/65b543/32.png) [@akkord](https://forums.speedlife.net/u/akkord)\ **Post date:** [April 29, 2006, 7:52am UTC](https://forums.speedlife.net/t/tweeter-problem-question/11418/1 "2006-04-29T07:52:27Z")
I have the MTX Biggest Boldest Loudest series Component Speakers/Tweeters which are amped by an Eclipse Amp. While driving earlier the right side door tweeter just stopped working. The component at the bottom of the door still works but the tweeter doesnt. Is it possible to just blow only one tweeter or did it short? Please let me know ---
**Author:** ![Adictd2b00st](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/adictd2b00st/32/7625_2.png) [@Adictd2b00st](https://forums.speedlife.net/u/Adictd2b00st)\ **Post date:** [April 29, 2006, 8:24am UTC](https://forums.speedlife.net/t/tweeter-problem-question/11418/2 "2006-04-29T08:24:14Z")
its possible, altho i’d lean towards it coming disconnected from the crossover. if it was blown it’d most likely still play but sound like ass. i’d check that first ---
**Author:** ![focusinprogress](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/focusinprogress/32/7227_2.png) [@focusinprogress](https://forums.speedlife.net/u/focusinprogress)\ **Post date:** [April 29, 2006, 11:17am UTC](https://forums.speedlife.net/t/tweeter-problem-question/11418/3 "2006-04-29T11:17:32Z")
dude i bet the connections just pulled out, the passenger side i forgot to double check your connections, the driverside i went over all of them. ---
**Author:** ![The\_Russian](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/the_russian/32/7414_2.png) [@The\_Russian](https://forums.speedlife.net/u/The_Russian)\ **Post date:** [April 29, 2006, 1:12pm UTC](https://forums.speedlife.net/t/tweeter-problem-question/11418/4 "2006-04-29T13:12:51Z")
speakers dont blow out like that unless you melted the voice coil ---
**Author:** ![ezfd](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ezfd/32/7334_2.png) [@ezfd](https://forums.speedlife.net/u/ezfd)\ **Post date:** [April 29, 2006, 3:03pm UTC](https://forums.speedlife.net/t/tweeter-problem-question/11418/5 "2006-04-29T15:03:10Z")
check to see if there is an oveload cut off breaker or something ---
**Author:** ![focusinprogress](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/focusinprogress/32/7227_2.png) [@focusinprogress](https://forums.speedlife.net/u/focusinprogress)\ **Post date:** [April 30, 2006, 9:11am UTC](https://forums.speedlife.net/t/tweeter-problem-question/11418/6 "2006-04-30T09:11:22Z")
i think its his amp cutting out, he says the volume gets cut out pretty bad if he goes above a certain volume, ill be checking it out tomarrow ---
**Author:** ![lightningbolt444](https://avatars.discourse-cdn.com/v4/letter/l/f17d59/32.png) [@lightningbolt444](https://forums.speedlife.net/u/lightningbolt444)\ **Post date:** [April 30, 2006, 4:22pm UTC](https://forums.speedlife.net/t/tweeter-problem-question/11418/7 "2006-04-30T16:22:56Z")
Check the crossover settings if here set to high the volume will cut in and out. also a speaker/woofer can stop working without melting a voice coil you can blow a tinsel lead which in that case no pwer goes to the coil so you get no noise but really it doesnt sound blown just trace the wiring and checkthe xove settings ---
**Author:** ![focusinprogress](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/focusinprogress/32/7227_2.png) [@focusinprogress](https://forums.speedlife.net/u/focusinprogress)\ **Post date:** [May 12, 2006, 10:33am UTC](https://forums.speedlife.net/t/tweeter-problem-question/11418/8 "2006-05-12T10:33:42Z")
after checking everything out the passenger tweeter WAS indeed blown. the volume problem was the DSO on the HU was set too high and kicking the amp into saftey mode.