# TWO 2.5'' 90 degree bends ASAP **URL:** \ **Category:** Classifieds\ **Created:** [November 15, 2013, 7:47pm UTC](https://forums.speedlife.net/t/two-2-5-90-degree-bends-asap/233873 "2013-11-15T19:47:40Z")\ **Posts on this page:** 10\ **Page:** 1
**Author:** ![robftw](https://avatars.discourse-cdn.com/v4/letter/r/6bbea6/32.png) [@robftw](https://forums.speedlife.net/u/robftw)\ **Post date:** [November 15, 2013, 7:47pm UTC](https://forums.speedlife.net/t/two-2-5-90-degree-bends-asap/233873/1 "2013-11-15T19:47:40Z")
I need two 90degree 2.5’’ pipe bends asap. They need to be really tight, no more than 7’’ [ATTACH=CONFIG]25080[/ATTACH] ---
**Author:** ![cougarspeed](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/cougarspeed/32/7468_2.png) [@cougarspeed](https://forums.speedlife.net/u/cougarspeed)\ **Post date:** [November 15, 2013, 9:35pm UTC](https://forums.speedlife.net/t/two-2-5-90-degree-bends-asap/233873/2 "2013-11-15T21:35:40Z")
I have a 180 that I could cut in half. What material are you looking for? It is stainless. ---
**Author:** ![robftw](https://avatars.discourse-cdn.com/v4/letter/r/6bbea6/32.png) [@robftw](https://forums.speedlife.net/u/robftw)\ **Post date:** [November 15, 2013, 9:52pm UTC](https://forums.speedlife.net/t/two-2-5-90-degree-bends-asap/233873/3 "2013-11-15T21:52:07Z")
Can it be welded to a regular flange? I don’t need anything fancy its just going to dump near the tires with straight pipes for the time being ---
**Author:** ![cougarspeed](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/cougarspeed/32/7468_2.png) [@cougarspeed](https://forums.speedlife.net/u/cougarspeed)\ **Post date:** [November 15, 2013, 10:16pm UTC](https://forums.speedlife.net/t/two-2-5-90-degree-bends-asap/233873/4 "2013-11-15T22:16:54Z")
I can weld it to non stainless. But since stainless is expensive you might want to find some mild 90s. If you dont care if they are mandrel just hit a muffler shop. KnS has some bends. Classic tube as well. ---
**Author:** ![turbociv](https://avatars.discourse-cdn.com/v4/letter/t/dfb087/32.png) [@turbociv](https://forums.speedlife.net/u/turbociv)\ **Post date:** [November 16, 2013, 11:50am UTC](https://forums.speedlife.net/t/two-2-5-90-degree-bends-asap/233873/5 "2013-11-16T11:50:04Z")
that tight of a radius you may need a donut. [http://www.ebay.com/itm/Mandrel-Bend-Donut-Exhaust-Intake-Mild-Steel-Turbo-acc-2-5-2-5in-2-50in-2-50-/251052917495?pt=Motors\_Car\_Truck\_Parts\_Accessories&hash=item3a73eb82f7&vxp=mtr](http://www.ebay.com/itm/Mandrel-Bend-Donut-Exhaust-Intake-Mild-Steel-Turbo-acc-2-5-2-5in-2-50in-2-50-/251052917495?pt=Motors_Car_Truck_Parts_Accessories&hash=item3a73eb82f7&vxp=mtr) ---
**Author:** ![robftw](https://avatars.discourse-cdn.com/v4/letter/r/6bbea6/32.png) [@robftw](https://forums.speedlife.net/u/robftw)\ **Post date:** [November 16, 2013, 9:43pm UTC](https://forums.speedlife.net/t/two-2-5-90-degree-bends-asap/233873/6 "2013-11-16T21:43:46Z")
> [@turbociv](#): > > that tight of a radius you may need a donut. > > [http://www.ebay.com/itm/Mandrel-Bend-Donut-Exhaust-Intake-Mild-Steel-Turbo-acc-2-5-2-5in-2-50in-2-50-/251052917495?pt=Motors\_Car\_Truck\_Parts\_Accessories&hash=item3a73eb82f7&vxp=mtr](http://www.ebay.com/itm/Mandrel-Bend-Donut-Exhaust-Intake-Mild-Steel-Turbo-acc-2-5-2-5in-2-50in-2-50-/251052917495?pt=Motors_Car_Truck_Parts_Accessories&hash=item3a73eb82f7&vxp=mtr) i checked out the 3’’ 180\* bends at pepboys, a 180 cut in half will work. They just don’t stock a 2.5’’ ---
**Author:** ![Haenszel](https://avatars.discourse-cdn.com/v4/letter/h/e68b1a/32.png) [@Haenszel](https://forums.speedlife.net/u/Haenszel)\ **Post date:** [November 16, 2013, 9:46pm UTC](https://forums.speedlife.net/t/two-2-5-90-degree-bends-asap/233873/7 "2013-11-16T21:46:30Z")
Only have alum here. ---
**Author:** ![cougarspeed](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/cougarspeed/32/7468_2.png) [@cougarspeed](https://forums.speedlife.net/u/cougarspeed)\ **Post date:** [November 16, 2013, 10:11pm UTC](https://forums.speedlife.net/t/two-2-5-90-degree-bends-asap/233873/8 "2013-11-16T22:11:58Z")
Still have my stainless ---
**Author:** ![robftw](https://avatars.discourse-cdn.com/v4/letter/r/6bbea6/32.png) [@robftw](https://forums.speedlife.net/u/robftw)\ **Post date:** [November 16, 2013, 10:13pm UTC](https://forums.speedlife.net/t/two-2-5-90-degree-bends-asap/233873/9 "2013-11-16T22:13:41Z")
> [@cougarspeed](#): > > Still have my stainless That’s too fancy for the rest of the car ---
**Author:** ![cougarspeed](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/cougarspeed/32/7468_2.png) [@cougarspeed](https://forums.speedlife.net/u/cougarspeed)\ **Post date:** [November 16, 2013, 10:53pm UTC](https://forums.speedlife.net/t/two-2-5-90-degree-bends-asap/233873/10 "2013-11-16T22:53:14Z")
They are like $30.