# UB question for tools and stuff
**URL:** https://forums.speedlife.net/t/ub-question-for-tools-and-stuff/8378
**Category:** NYSpeed Off Topic
**Created:** [February 20, 2006, 6:12am UTC](https://forums.speedlife.net/t/ub-question-for-tools-and-stuff/8378 "2006-02-20T06:12:37Z")
**Posts on this page:** 16
**Page:** 1
### Author:  [@Willybeen](https://forums.speedlife.net/u/Willybeen)
#### Post date: [February 20, 2006, 6:12am UTC](https://forums.speedlife.net/t/ub-question-for-tools-and-stuff/8378/1 "2006-02-20T06:12:37Z")
at the bottom of one of the buildings near the governors lots… there are a bunch of like drill presses, bandsaws, etc etc… what are the requirements to get use out of those machines? anybody have a hook up… i just need to fab up a licence plate bracket for the new bike… and i know last year some dude used the one building over between knox and the union to make an exhaust mount on his sv1000… and it turned out really nice…
thank
-will
---
### Author:  [@fairgentleman\_Z](https://forums.speedlife.net/u/fairgentleman_Z)
#### Post date: [February 20, 2006, 6:24am UTC](https://forums.speedlife.net/t/ub-question-for-tools-and-stuff/8378/2 "2006-02-20T06:24:25Z")
1. UB student
2. Safety course (like 1 hour, general walkthrough)
3. Valid reason to use shop (you are doing this for a design project, right 😉 )
---
### Author:  [@Willybeen](https://forums.speedlife.net/u/Willybeen)
#### Post date: [February 20, 2006, 6:38am UTC](https://forums.speedlife.net/t/ub-question-for-tools-and-stuff/8378/3 "2006-02-20T06:38:20Z")
ok… how do u get to this place… what building… is there a specific time i should do it?
thanks julie 🙂
---
### Author:  [@fairgentleman\_Z](https://forums.speedlife.net/u/fairgentleman_Z)
#### Post date: [February 20, 2006, 6:39am UTC](https://forums.speedlife.net/t/ub-question-for-tools-and-stuff/8378/4 "2006-02-20T06:39:24Z")
Jarvis 105
anytime between 8am and 4 pm
---
### Author:  [@Willybeen](https://forums.speedlife.net/u/Willybeen)
#### Post date: [February 20, 2006, 6:44am UTC](https://forums.speedlife.net/t/ub-question-for-tools-and-stuff/8378/5 "2006-02-20T06:44:13Z")
your my hero ❤ thanks… hmm now which design class is this gonna be for???
---
### Author:  [@vq30de](https://forums.speedlife.net/u/vq30de)
#### Post date: [February 20, 2006, 6:46am UTC](https://forums.speedlife.net/t/ub-question-for-tools-and-stuff/8378/6 "2006-02-20T06:46:20Z")
Is there anywhere on campus that has a CNC lathe? I have an arc project that it would be quite handy for…
---
### Author:  [@fairgentleman\_Z](https://forums.speedlife.net/u/fairgentleman_Z)
#### Post date: [February 20, 2006, 6:58am UTC](https://forums.speedlife.net/t/ub-question-for-tools-and-stuff/8378/7 "2006-02-20T06:58:18Z")
CNC :lol: this _is_ UB.
---
### Author:  [@Paulo](https://forums.speedlife.net/u/Paulo)
#### Post date: [February 20, 2006, 7:28am UTC](https://forums.speedlife.net/t/ub-question-for-tools-and-stuff/8378/8 "2006-02-20T07:28:32Z")
this is interesting. i need to look into this as well…should def come in handy.
> [@fairgentleman Z](#):
>
> CNC :lol: this is UB.
Even ECC has CNC lathes and mills WTF!
---
### Author:  [@Willybeen](https://forums.speedlife.net/u/Willybeen)
#### Post date: [February 20, 2006, 8:26am UTC](https://forums.speedlife.net/t/ub-question-for-tools-and-stuff/8378/9 "2006-02-20T08:26:42Z")
ok i went to the lab and i got shutdown… i went to the one in fronzac…they told me the lab in jarvis was strictly for engineering majors… can anybody confirm this… im going to try to go there in about 10 minutes
---
### Author:  [@fairgentleman\_Z](https://forums.speedlife.net/u/fairgentleman_Z)
#### Post date: [February 20, 2006, 8:39am UTC](https://forums.speedlife.net/t/ub-question-for-tools-and-stuff/8378/10 "2006-02-20T08:39:30Z")
We have non majors in SAE that use it all the time, but then again, they are in SAE.
---
### Author:  [@Willybeen](https://forums.speedlife.net/u/Willybeen)
#### Post date: [February 20, 2006, 8:41am UTC](https://forums.speedlife.net/t/ub-question-for-tools-and-stuff/8378/11 "2006-02-20T08:41:33Z")
what should i say when i go there… think if i “was” or PLAN to be in engineering i can get in?
EDIT:: i tried to get the team a cbr 600 rectifier… “im a team player” lol
---
### Author:  [@Blue\_Eyed\_Devil](https://forums.speedlife.net/u/Blue_Eyed_Devil)
#### Post date: [February 20, 2006, 9:00am UTC](https://forums.speedlife.net/t/ub-question-for-tools-and-stuff/8378/12 "2006-02-20T09:00:17Z")
> [@93z24](#):
>
> this is interesting. i need to look into this as well…should def come in handy.
>
> Even ECC has CNC lathes and mills WTF!
ECC has a great machining program that I have tried to promote in the past.🙂
---
### Author:  [@Willybeen](https://forums.speedlife.net/u/Willybeen)
#### Post date: [February 20, 2006, 9:09am UTC](https://forums.speedlife.net/t/ub-question-for-tools-and-stuff/8378/13 "2006-02-20T09:09:03Z")
anybody in engineering mind accompaning me to the lab later… if you have access previously i seem to think i will have an easier time getting in… thanks
---
### Author:  [@Willybeen](https://forums.speedlife.net/u/Willybeen)
#### Post date: [February 20, 2006, 9:20am UTC](https://forums.speedlife.net/t/ub-question-for-tools-and-stuff/8378/14 "2006-02-20T09:20:05Z")
i have off and will be on campus from 2-4 if anybody could please help me it would be appreciated…
btw when i go to jarvis 105… what sshould i expect… a person at a desk? just go in and do what i gotta do? is there supervision?
thanks
---
### Author:  [@fairgentleman\_Z](https://forums.speedlife.net/u/fairgentleman_Z)
#### Post date: [February 20, 2006, 10:01am UTC](https://forums.speedlife.net/t/ub-question-for-tools-and-stuff/8378/15 "2006-02-20T10:01:27Z")
> [@Willybeen](#):
>
> i have off and will be on campus from 2-4 if anybody could please help me it would be appreciated…
>
> btw when i go to jarvis 105… what sshould i expect… a person at a desk? just go in and do what i gotta do? is there supervision?
> thanks
Just walk in like you know what you are doing, grab a pair of safety glasses to the right. Just say you wanted to check out the formula or baja car.
I’d go and hold your hand but I have a lab then.
---
### Author:  [@Willybeen](https://forums.speedlife.net/u/Willybeen)
#### Post date: [February 20, 2006, 10:05am UTC](https://forums.speedlife.net/t/ub-question-for-tools-and-stuff/8378/16 "2006-02-20T10:05:11Z")
awww thanks… lol… i guess i will do that… i should only be about 20 minutes… unless i get antsy and wanna make it pretty…
pretty much just gonna make it out of an old erector set if i can get the piece i need…
do u think they will have any scrap metal laying around in there?
i just want to be able to make it pivot so i can change the angle of my plate