# Ugh, Delays

**URL:** <https://forums.speedlife.net/t/ugh-delays/14330>\
**Category:** NYSpeed Automotive\
**Created:** [July 9, 2006, 8:03pm UTC](https://forums.speedlife.net/t/ugh-delays/14330 "2006-07-09T20:03:13Z")\
**Posts on this page:** 1\
**Showing post:** 31

<div class="post-metadata">

**Author:** ![DrDoS](https://avatars.discourse-cdn.com/v4/letter/d/ccd318/32.png) [@DrDoS](https://forums.speedlife.net/u/DrDoS)\
**Post date:** [July 10, 2006, 12:15pm UTC](https://forums.speedlife.net/t/ugh-delays/14330/31 "2006-07-10T12:15:50Z")

</div>

> [@HotRodKid](#):
>
> ^^^wtf ??? they wont fix it ?
> 
> partial charge back by your CC company FTW

they said it should fit fine , if you just play around w/ it/ by bolting on the flange first to the waste gate and mess around w/ the v-band clamp. and i quote the IS boards

> [@Malekreza11](#):
>
> no you are not missing anything. Every PFS kit i have installed (about 5 of them) have that same exact fitment issue. Not as bad as yours, but there is a definete issue on fitment. Its not perfectly flush. But if you play around, you should be able to create a seal.

> [@Kanine21](#):
>
> I had this same issue when I first got my kit way back in 03’. What Peter told me to do was to make sure I hooked up the whole exhaust system and everything, and the pipe would rotate into position. Leave the V-band tightening for last.
> 
> I did, and sure enough it lined up perfectly. I’ve helped about 10 people with this issue, and they all lined up just fine once the complete exhaust was hooked up.
> 
> If you have everything installed, loosen the v-band and rotate the pipe if possible and see if you can get it closer.
> 
> Kane

> [@Malekreza11](#):
>
> Kane’s idea has worked for some of the PFS kits i have installed. Some had ok fitment, some had rather poor fitment like the one pictured above. With the way yours looks, you will have a major leak one way or another. Either from the Vband or from your wastegate.
> 
> **I simply suggest getting that portion of the pipe redone and extended for better fitment. It wont cost ya much.**

so im gonna have to look into this.

---

_[View the full topic](https://forums.speedlife.net/t/ugh-delays/14330)._