# Ugh, Delays

**URL:** <https://forums.speedlife.net/t/ugh-delays/14330>\
**Category:** NYSpeed Automotive\
**Created:** [July 9, 2006, 8:03pm UTC](https://forums.speedlife.net/t/ugh-delays/14330 "2006-07-09T20:03:13Z")\
**Posts on this page:** 1\
**Showing post:** 47

<div class="post-metadata">

**Author:** ![DrDoS](https://avatars.discourse-cdn.com/v4/letter/d/ccd318/32.png) [@DrDoS](https://forums.speedlife.net/u/DrDoS)\
**Post date:** [July 17, 2006, 8:22am UTC](https://forums.speedlife.net/t/ugh-delays/14330/47 "2006-07-17T08:22:37Z")

</div>

cliffs:

downpipe is now on and all set to go

test drove it, was boosting good… notice oil burning and smoke  
popped the hood small fire on wastegate  
looked into it.  
breather i am using on the valve cover is spitting out oil on the waste gate due to blowby.  
which could be 2 things  
cracked piston ring  
also it is a common problem w/ the IS300’s  
alot of people are running catch cans  
like these  
 ![http://mywebpages.comcast.net/lambchop11078/BoostLogic/Catch_Can.jpg](http://mywebpages.comcast.net/lambchop11078/BoostLogic/Catch_Can.jpg)  
Also which could cause so much blowby is the timing on the exhuast cam could not be right.

so today we are running a compression test to make sure i dident crack a piston ring ( i hope not)  
also gonna check the timing of make sure that is not off.

will keep you guys updated.

---

_[View the full topic](https://forums.speedlife.net/t/ugh-delays/14330)._