# Ugly Betty : The winter project.

**URL:** <https://forums.speedlife.net/t/ugly-betty-the-winter-project/240569>\
**Category:** Builds\
**Created:** [December 4, 2008, 3:17pm UTC](https://forums.speedlife.net/t/ugly-betty-the-winter-project/240569 "2008-12-04T15:17:15Z")\
**Posts on this page:** 20\
**Page:** 2

<div class="post-metadata">

**Author:** ![mcflurry](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/mcflurry/32/6468_2.png) [@mcflurry](https://forums.speedlife.net/u/mcflurry)\
**Post date:** [December 4, 2008, 7:32pm UTC](https://forums.speedlife.net/t/ugly-betty-the-winter-project/240569/21 "2008-12-04T19:32:57Z")

</div>

ill be quitin in the next week or so…they wanted to fire me for being in the hospital for a week… :nuts

---

<div class="post-metadata">

**Author:** ![kramerbuccs24](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/kramerbuccs24/32/6397_2.png) [@kramerbuccs24](https://forums.speedlife.net/u/kramerbuccs24)\
**Post date:** [December 4, 2008, 8:29pm UTC](https://forums.speedlife.net/t/ugly-betty-the-winter-project/240569/22 "2008-12-04T20:29:04Z")

</div>

Shoot me a PM if you need some help cleaning her up ;D

---

<div class="post-metadata">

**Author:** ![xreaction](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/xreaction/32/6409_2.png) [@xreaction](https://forums.speedlife.net/u/xreaction)\
**Post date:** [December 4, 2008, 10:30pm UTC](https://forums.speedlife.net/t/ugly-betty-the-winter-project/240569/23 "2008-12-04T22:30:15Z")

</div>

> [@Hooked on 240](#):
>
> bought a shitload of stuff. didnt get a oil filter bc like sean said ive read they hate aftermarket crap.
> 
> The car came with brand new pads. so the brakes are next. all the rotors look fine but the driver rear. and the caliper has a broken bolt…All and all i say this car will be done next week. then off to inline or syanpase or somewhere for an exhaust then done ;D

punishment racing 3"Dp+test pipe+ebay catback+thermal R&D muffler=non overpowering decent sounding budget exhaust :nod

---

<div class="post-metadata">

**Author:** ![Hooked\_on\_240](https://avatars.discourse-cdn.com/v4/letter/h/b9e5f3/32.png) [@Hooked\_on\_240](https://forums.speedlife.net/u/Hooked_on_240)\
**Post date:** [December 5, 2008, 5:20am UTC](https://forums.speedlife.net/t/ugly-betty-the-winter-project/240569/24 "2008-12-05T05:20:29Z")

</div>

> [@xreaction122](#):
>
> punishment racing 3"Dp+test pipe+ebay catback+thermal R&D muffler=non overpowering decent sounding budget exhaust :nod

how much for all that to my house. i was just looking for mandrel bent tube. BASIC. as i dont want to spend money on the car where its not really needed.

---

<div class="post-metadata">

**Author:** ![Hooked\_on\_240](https://avatars.discourse-cdn.com/v4/letter/h/b9e5f3/32.png) [@Hooked\_on\_240](https://forums.speedlife.net/u/Hooked_on_240)\
**Post date:** [December 7, 2008, 8:41pm UTC](https://forums.speedlife.net/t/ugly-betty-the-winter-project/240569/25 "2008-12-07T20:41:16Z")

</div>

First post updated

---

<div class="post-metadata">

**Author:** ![Mk4\_30R\_Ban](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/mk4_30r_ban/32/6347_2.png) [@Mk4\_30R\_Ban](https://forums.speedlife.net/u/Mk4_30R_Ban)\
**Post date:** [December 7, 2008, 8:48pm UTC](https://forums.speedlife.net/t/ugly-betty-the-winter-project/240569/26 "2008-12-07T20:48:51Z")

</div>

DSM???  
 ![http://farm4.static.flickr.com/3094/3091957530_02acc290ea.jpg?v=0](http://farm4.static.flickr.com/3094/3091957530_02acc290ea.jpg?v=0)

---

<div class="post-metadata">

**Author:** ![Mk4\_30R\_Ban](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/mk4_30r_ban/32/6347_2.png) [@Mk4\_30R\_Ban](https://forums.speedlife.net/u/Mk4_30R_Ban)\
**Post date:** [December 7, 2008, 8:52pm UTC](https://forums.speedlife.net/t/ugly-betty-the-winter-project/240569/27 "2008-12-07T20:52:29Z")

</div>

![http://farm4.static.flickr.com/3189/3091961524_49f2b63319.jpg?v=0](http://farm4.static.flickr.com/3189/3091961524_49f2b63319.jpg?v=0)

---

<div class="post-metadata">

**Author:** ![tdi\_logik](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/tdi_logik/32/6310_2.png) [@tdi\_logik](https://forums.speedlife.net/u/tdi_logik)\
**Post date:** [December 7, 2008, 8:53pm UTC](https://forums.speedlife.net/t/ugly-betty-the-winter-project/240569/28 "2008-12-07T20:53:32Z")

</div>

where’s the balance shafts on those???

---

<div class="post-metadata">

**Author:** ![Hooked\_on\_240](https://avatars.discourse-cdn.com/v4/letter/h/b9e5f3/32.png) [@Hooked\_on\_240](https://forums.speedlife.net/u/Hooked_on_240)\
**Post date:** [December 7, 2008, 8:54pm UTC](https://forums.speedlife.net/t/ugly-betty-the-winter-project/240569/29 "2008-12-07T20:54:39Z")

</div>

> [@Mk4 30R](#):
>
> ![http://farm4.static.flickr.com/3189/3091961524_49f2b63319.jpg?v=0](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/3X/1/5/15c0d05899c9b57549de346b4150b2c0592db739.jpeg)

idk what the point of posting those was, but it just help me solve 3 problems. :lol

---

<div class="post-metadata">

**Author:** ![Mk4\_30R\_Ban](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/mk4_30r_ban/32/6347_2.png) [@Mk4\_30R\_Ban](https://forums.speedlife.net/u/Mk4_30R_Ban)\
**Post date:** [December 7, 2008, 9:00pm UTC](https://forums.speedlife.net/t/ugly-betty-the-winter-project/240569/30 "2008-12-07T21:00:26Z")

</div>

> [@30r\_logik](#):
>
> where’s the balance shafts on those???

---

<div class="post-metadata">

**Author:** ![xreaction](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/xreaction/32/6409_2.png) [@xreaction](https://forums.speedlife.net/u/xreaction)\
**Post date:** [December 7, 2008, 9:04pm UTC](https://forums.speedlife.net/t/ugly-betty-the-winter-project/240569/31 "2008-12-07T21:04:12Z")

</div>

send that VC out to get it powdercoated if you can cuz 99.9% chance that its going to leak oil

> [@Hooked on 240](#):
>
> how much for all that to my house. i was just looking for mandrel bent tube. BASIC. as i dont want to spend money on the car where its not really needed.

downpipe is 115 and testpipe is around 30 bucks and ebay exhausts are in the mid 100s. so id be looking at 300 for everything with the muffler

---

<div class="post-metadata">

**Author:** ![Hooked\_on\_240](https://avatars.discourse-cdn.com/v4/letter/h/b9e5f3/32.png) [@Hooked\_on\_240](https://forums.speedlife.net/u/Hooked_on_240)\
**Post date:** [December 7, 2008, 9:05pm UTC](https://forums.speedlife.net/t/ugly-betty-the-winter-project/240569/32 "2008-12-07T21:05:56Z")

</div>

> [@xreaction122](#):
>
> send that VC out to get it powdercoated if you can cuz 99.9% chance that its going to leak oil

possible this car is a .01 exception? :lol

---

<div class="post-metadata">

**Author:** ![Mk4\_30R\_Ban](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/mk4_30r_ban/32/6347_2.png) [@Mk4\_30R\_Ban](https://forums.speedlife.net/u/Mk4_30R_Ban)\
**Post date:** [December 7, 2008, 9:07pm UTC](https://forums.speedlife.net/t/ugly-betty-the-winter-project/240569/33 "2008-12-07T21:07:29Z")

</div>

> [@xreaction122](#):
>
> send that VC out to get it powdercoated if you can cuz 99.9% chance that its going to leak oil

its either the gasket, or the oil cap… unless a moron installed it, over tightened the hardware and hairline cracked the tabs.

---

<div class="post-metadata">

**Author:** ![xreaction](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/xreaction/32/6409_2.png) [@xreaction](https://forums.speedlife.net/u/xreaction)\
**Post date:** [December 7, 2008, 9:09pm UTC](https://forums.speedlife.net/t/ugly-betty-the-winter-project/240569/34 "2008-12-07T21:09:23Z")

</div>

> [@Mk4 30R](#):
>
> its either the gasket, or the oil cap… unless a moron installed it, over tightened the hardware and hairline cracked the tabs.

yeah thats what happens to most of them. because people think that you should torque down the vc as much as you can and it cracks :lol

---

<div class="post-metadata">

**Author:** ![Hooked\_on\_240](https://avatars.discourse-cdn.com/v4/letter/h/b9e5f3/32.png) [@Hooked\_on\_240](https://forums.speedlife.net/u/Hooked_on_240)\
**Post date:** [December 7, 2008, 9:10pm UTC](https://forums.speedlife.net/t/ugly-betty-the-winter-project/240569/35 "2008-12-07T21:10:37Z")

</div>

> [@xreaction122](#):
>
> yeah thats what happens to most of them. because people think that you should torque down the vc as much as you can and it cracks :lol

lol. well it has a new vc gasket now, and shouldnt leak. powercoating is out bc its only a winter DD. paint ftw.

---

<div class="post-metadata">

**Author:** ![xreaction](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/xreaction/32/6409_2.png) [@xreaction](https://forums.speedlife.net/u/xreaction)\
**Post date:** [December 7, 2008, 9:12pm UTC](https://forums.speedlife.net/t/ugly-betty-the-winter-project/240569/36 "2008-12-07T21:12:28Z")

</div>

> [@Hooked on 240](#):
>
> lol. well it has a new vc gasket now, and shouldnt leak. powercoating is out bc its only a winter DD. paint ftw.

should be fine :nod dupli-color engine enamel at the dollar shop will do the trick

---

<div class="post-metadata">

**Author:** ![Hooked\_on\_240](https://avatars.discourse-cdn.com/v4/letter/h/b9e5f3/32.png) [@Hooked\_on\_240](https://forums.speedlife.net/u/Hooked_on_240)\
**Post date:** [December 7, 2008, 9:14pm UTC](https://forums.speedlife.net/t/ugly-betty-the-winter-project/240569/37 "2008-12-07T21:14:28Z")

</div>

> [@xreaction122](#):
>
> should be fine :nod dupli-color engine enamel at the dollar shop will do the trick

ideas?

was thinking about doing an aqua teen hunger force theme. with those paint pens.  
[http://forums.nicoclub.com/zerothread/351406](http://forums.nicoclub.com/zerothread/351406)

---

<div class="post-metadata">

**Author:** ![xreaction](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/xreaction/32/6409_2.png) [@xreaction](https://forums.speedlife.net/u/xreaction)\
**Post date:** [December 7, 2008, 9:24pm UTC](https://forums.speedlife.net/t/ugly-betty-the-winter-project/240569/38 "2008-12-07T21:24:07Z")

</div>

> [@Hooked on 240](#):
>
> ideas?
> 
> was thinking about doing an aqua teen hunger force theme. with those paint pens.  
> [http://forums.nicoclub.com/zerothread/351406](http://forums.nicoclub.com/zerothread/351406)

haha i wish i had the skills to pull that one off :nod  
i always liked black with red letters but i personally have black with silver

---

<div class="post-metadata">

**Author:** ![Hooked\_on\_240](https://avatars.discourse-cdn.com/v4/letter/h/b9e5f3/32.png) [@Hooked\_on\_240](https://forums.speedlife.net/u/Hooked_on_240)\
**Post date:** [December 7, 2008, 9:26pm UTC](https://forums.speedlife.net/t/ugly-betty-the-winter-project/240569/39 "2008-12-07T21:26:30Z")

</div>

> [@xreaction122](#):
>
> haha i wish i had the skills to pull that one off :nod  
> i always liked black with red letters but i personally have black with silver

3 coats of paint. dry 1 day.

take mechanical pencil, and draw then draw in with pen. actually not that hard. but hard enough that i cant do it :lol im doing something. idk…

---

<div class="post-metadata">

**Author:** ![xreaction](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/xreaction/32/6409_2.png) [@xreaction](https://forums.speedlife.net/u/xreaction)\
**Post date:** [December 7, 2008, 9:29pm UTC](https://forums.speedlife.net/t/ugly-betty-the-winter-project/240569/40 "2008-12-07T21:29:01Z")

</div>

> [@Hooked on 240](#):
>
> 3 coats of paint. dry 1 day.
> 
> take mechanical pencil, and draw then draw in with pen. actually not that hard. but hard enough that i cant do it :lol im doing something. idk…

that aqua teen theme would be sick with shaved letters :cool

[Previous page](https://forums.speedlife.net/t/ugly-betty-the-winter-project/240569.md?page=1)

[Next page](https://forums.speedlife.net/t/ugly-betty-the-winter-project/240569.md?page=3)
