# Universal Power/Performance Parts + 240/SR Specific **URL:** \ **Category:** Classifieds\ **Created:** [April 14, 2012, 3:00pm UTC](https://forums.speedlife.net/t/universal-power-performance-parts-240-sr-specific/222132 "2012-04-14T15:00:37Z")\ **Posts on this page:** 10\ **Page:** 1
**Author:** ![robbbby](https://avatars.discourse-cdn.com/v4/letter/r/b19c9b/32.png) [@robbbby](https://forums.speedlife.net/u/robbbby)\ **Post date:** [April 14, 2012, 3:00pm UTC](https://forums.speedlife.net/t/universal-power-performance-parts-240-sr-specific/222132/1 "2012-04-14T15:00:37Z")
I have a ton of stuff, probably will take me a full day to get pictures/price/upload/post everything so i’ll break it down into 2 parts. First will be just universal stuff not specific to 240/SR since i’ve already gathered all that info to post other places and later on i will update this with all my 240/SR stuff, or at least some parts to start. I AM LOCATED IN WINDSOR **Borg Warner/Bullseye S366 Turbo** Never used. Divided T4 Outlet. Believe it’s a .9x A/R turbine. Comes with oil return flange/gasket and turbine vband outlet/clamp [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) $1000 **Aeromotive Eliminator Fuel Pump** Used but in good working condition. Comes with inlet and outlet fittings (Believe -10, need to verify) [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) $380 **Aeromotive Compact FPR** Used but in good working condition. Comes with -6 fittings [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) $110 **Aeromotive Fuel Filter** Used. Don’t know the part number so no idea on micron filtration etc. Comes with 2 -8 fittings [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) $65 **Trick Flow Fuel Filter** New in box. Part number TFS-23005 [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) $60 **Earl’s -4 Filter** New in box. Part number 230304ERL Great for turbo oil feed. [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) $25 **K&N Air Filter** New in box. 4" Inlet, 5" in length, conical shape [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) $35 **MSD Wire** New in box. 8.5mm Super conductor plug wire 25ft. red [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) $40 **MSD Boots** 4 Straight boots 4 90 degree boots [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) $20 **2 - XO Racing Knockoff Wastegates** New. 44mm Believe there is some springs that come with it. [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) $50 each **Greddy RS BOV** Have no idea where I bought this, I can’t say it’s new with 100% certainty but it doesn’t look like it has ever been used. New gasket No flanges. [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) $120 **Cooling Mist Meth/Water Injection Kit** Used (Barely) Comes with all the parts, some misc. hoses and extra injector nozzles. If interested i’ll get a break down of every piece. [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) $230 **Autometer Carbon Gauges** Used, faces in great condition. Boost, Oil Temp, Oil Pressure. All gauges come with the needed fittings, senders, sensors. Only thing missing, boost needs new hose. [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) $40 each **Blitz FATT DCII Turbo Timer** Used, good working condition. [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) $45 **Professional Products Mustang Throttle Body** New, never used. 3" inlet Comes with all gaskets and misc parts. Also have used mustang IACV that fits throttle body if needed. [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) $110 **DMH Electric Exhaust Cutout** Used but in good working condition. 3" Comes with Y pipe, block off plate, cutout/switch etc. Does not come on the downpipe pictures [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) $130 **Catco High Flow Catalytic** $SOLD **Innovate Motorsports LM-1** Used, still works perfectly Comes with everything needed including bosch wideband o2 sensor. [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) $100 **Precision Turbo Intercooler** New. Bar and plate design. Bought this as a core started building my own end tanks and mounts, never finished. Core Size is 4.5" deep, 12" tall, 16" across. It is mostly complete minus a piece of round aluminum welded to endtank for IC piping Has a flange welded on to fit the greddy BOV If anyone is interested in this I will gladly help with LIGHT modifications of the endtank & welding, welding of the pipe connector at endtank and welding of brackets to fit your vehicle. [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) $315 **Summit Linelock** Used, works. Missing all the little crimps and switches that would come with it [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) $20 **Precision Turbo 1000cc Injectors** $SOLD **DSM Injector Box** Used obviously [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) $10 If you’re interested in anything PM me, don’t post here. Thanks. ---
**Author:** ![robbbby](https://avatars.discourse-cdn.com/v4/letter/r/b19c9b/32.png) [@robbbby](https://forums.speedlife.net/u/robbbby)\ **Post date:** [April 14, 2012, 9:58pm UTC](https://forums.speedlife.net/t/universal-power-performance-parts-240-sr-specific/222132/2 "2012-04-14T21:58:01Z")
I’ll use this post for all the S13/SR20 Stuff I have. Again, i’m located in Windsor and will gladly ship in Canada. Must make payments with EMT though, no money orders and no paypal. I’ll continue updating this post with new stuff as I dig it up, take pictures, etc. **Whiteline Front and Rear Sway Bars S13** Used, good condition for something that was under a car. I have all the nuts/bolts/bushings, ready to bolt on [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) $300 **SR20 IACV** Used. Have 2 of these. [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) $10 **Greddy Oil Pan - SR20** Used. Excellent condition. Hole drilled and tapped into top of pan for a -10 oil return. Can easily be capped off with a $3 -10AN cap from princess auto. [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) $200 **Z32 Master Cylinder** Bought as a refurbished/rebuilt unit. Honestly, not sure if it is 1" or 1-1/8" Tokico. [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) $100 **AEM EMS Version.1 - SR20** Used, great condition Still have original box. Serial on this is #3 for SR20. This is real OG shit. Comes with GM 3 bar map, boost solenoid and AIT [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) $875 **Ichiba 5 lug hubs** Used (barely) Car was driven very little with the 5 lugs, always on jacks, grease inside is still perfectly new. [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) $300 **OEM SR20 Fuel Rail** [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) $15 **SR20 Intake Manifold** Found this so figured i’d throw it up in case anyone is crazy enough to try. It was my (unfinished) attempt at building my own intake manifold for the SR. It’s been so long I don’t remember the volume of the plenum. All it really needs is a throttle body flange and vacuum ports. Was going to use the 3" mustang throttle body and IACV I have posted above on this. Each runner has venturi style intakes that you can see in the picture, don’t want to even think about what those cost me. [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) $150 **Sard SR20 Top Feed Fuel Rail** Used Comes with a -8 and -6 fitting (need to verify) Can also be run as a dual feed with a return on the middle (which is currently capped) SHOULD have all the parts (spacers) for this. If you’re interested PM me and i’ll double check, I know I saw them. [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) $120 **NGK BKR7E Plugs** New in box 24 BKR7E plugs + 4 VPower R5671A-8 Plugs [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) $40 **Nismo S13 SR20 Engine & Tranny Mounts** Used, good condition. [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) $225 **S13 DOHC Cluster** Used (imagine it wasn’t?) Perfect for a SR20 swap into a 89-90 SOHC S13 to get a OEM Tach. [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) $100 **Hotpipe** Used. I THINK this was from enjuku long ago. BOV flange welded on [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) $30 **SR20 HKS Flywheel** Used. Alright, I used this thing for all my sr20 days, it has holes drilled in it to “balance” it which was a mistake by a stupid machinist BUT it was fixed by a much more knowledgeable guy (reason for welds filling in holes). Had no trouble/balance/rev issues when my car dynoed Video of car the last time it ever ran [http://www.streetfire.net/video/sr20-gt3071r-tuned-by-eviltom-and-u2ndyno-and-kat\_129189.htm](http://www.streetfire.net/video/sr20-gt3071r-tuned-by-eviltom-and-u2ndyno-and-kat_129189.htm) Some feel good depressing nostalgia right there, going to go cry now. Not sure why I posted that… [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) $200 **SR20 Tomei 260/260 ProCams** Used. These have light wear marks on the journals but nothing crazy and gave me no issues [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) $210 [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) **SR20 Tomei 270/270 ProCams** Used. Sort of. WTF was I thinking? These were only used for a 3-4 hour dyno session, car retired afterwards. No pics, still installed in cylinder head which is at my parents house. $240 **R32 GTR 5 Bolt Wheel w/Tires** Used Awesome condition, have all 4 center caps with the weird tasty air foreign sayings. Has Kumho Supra Ecsta 712 Tires in half decent shape, very driveable. If anyone is really interested I can take pictures of each individual wheel for better inspection of condition. [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) $550 Will update later with more as I dig stuff up and grab boxes/stuff from parents house. Just a heads up of other things… Front z32 brakes/rotors, amazing condition Refurbed oem 240 rear calipers with 5 bolt rotors Nismo 2 way LSD installed in 1990 240sx open diff Fully built sr20 head - new guides/valves, light machine work, ferrea dual valve springs/retainers Built bottom end - eagle rods/cp pistons z32 tranny 3 s13/sr20 transmissions spare sr20 bottom end ---
**Author:** ![jamis33](https://avatars.discourse-cdn.com/v4/letter/j/ac91a4/32.png) [@jamis33](https://forums.speedlife.net/u/jamis33)\ **Post date:** [April 15, 2012, 6:44am UTC](https://forums.speedlife.net/t/universal-power-performance-parts-240-sr-specific/222132/3 "2012-04-15T06:44:51Z")
interested in meth kit and cutout. Please pm me. I tried to pm you but it won’t let me for some reason. So pm me an email so we can discuss meth kit and cutout. I’m from chatham. ---
**Author:** ![robbbby](https://avatars.discourse-cdn.com/v4/letter/r/b19c9b/32.png) [@robbbby](https://forums.speedlife.net/u/robbbby)\ **Post date:** [April 28, 2012, 4:57am UTC](https://forums.speedlife.net/t/universal-power-performance-parts-240-sr-specific/222132/4 "2012-04-28T04:57:30Z")
bump ---
**Author:** ![ILONGGO\_Z](https://avatars.discourse-cdn.com/v4/letter/i/47e85d/32.png) [@ILONGGO\_Z](https://forums.speedlife.net/u/ILONGGO_Z)\ **Post date:** [April 29, 2012, 2:35pm UTC](https://forums.speedlife.net/t/universal-power-performance-parts-240-sr-specific/222132/5 "2012-04-29T14:35:50Z")
Will u ship the 5lugs? ---
**Author:** ![74Celica](https://avatars.discourse-cdn.com/v4/letter/7/dfb087/32.png) [@74Celica](https://forums.speedlife.net/u/74Celica)\ **Post date:** [May 2, 2012, 8:55am UTC](https://forums.speedlife.net/t/universal-power-performance-parts-240-sr-specific/222132/6 "2012-05-02T08:55:46Z")
interested in line loc. pm if you still have it. ---
**Author:** ![robbbby](https://avatars.discourse-cdn.com/v4/letter/r/b19c9b/32.png) [@robbbby](https://forums.speedlife.net/u/robbbby)\ **Post date:** [May 26, 2012, 5:41pm UTC](https://forums.speedlife.net/t/universal-power-performance-parts-240-sr-specific/222132/7 "2012-05-26T17:41:38Z")
bump. Please PRIVATE MESSAGE me if you are interested in something or have a question, that way I get an email notification and can answer right away, I don’t come and check this post. ---
**Author:** ![Martino](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/martino/32/5674_2.png) [@Martino](https://forums.speedlife.net/u/Martino)\ **Post date:** [May 29, 2012, 5:16pm UTC](https://forums.speedlife.net/t/universal-power-performance-parts-240-sr-specific/222132/8 "2012-05-29T17:16:32Z")
Free bump for a legit seller. ---
**Author:** ![robbbby](https://avatars.discourse-cdn.com/v4/letter/r/b19c9b/32.png) [@robbbby](https://forums.speedlife.net/u/robbbby)\ **Post date:** [June 16, 2012, 4:38am UTC](https://forums.speedlife.net/t/universal-power-performance-parts-240-sr-specific/222132/9 "2012-06-16T04:38:16Z")
bump. Lots of stuff still sitting in my living room! ---
**Author:** ![karkas9](https://avatars.discourse-cdn.com/v4/letter/k/f14d63/32.png) [@karkas9](https://forums.speedlife.net/u/karkas9)\ **Post date:** [June 20, 2012, 9:23pm UTC](https://forums.speedlife.net/t/universal-power-performance-parts-240-sr-specific/222132/10 "2012-06-20T21:23:01Z")
bump. there is some legit amazing parts here for good prices.