# Unrelated "Carbon Fiber Pole" Project \*PHASE 2 Complete\*

**URL:** <https://forums.speedlife.net/t/unrelated-carbon-fiber-pole-project-phase-2-complete/22396>\
**Category:** Builds\
**Created:** [January 1, 2007, 8:00am UTC](https://forums.speedlife.net/t/unrelated-carbon-fiber-pole-project-phase-2-complete/22396 "2007-01-01T08:00:38Z")\
**Posts on this page:** 1\
**Showing post:** 195

<div class="post-metadata">

**Author:** ![LAFENGAS](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/lafengas/32/7573_2.png) [@LAFENGAS](https://forums.speedlife.net/u/LAFENGAS)\
**Post date:** [February 24, 2007, 3:33pm UTC](https://forums.speedlife.net/t/unrelated-carbon-fiber-pole-project-phase-2-complete/22396/195 "2007-02-24T15:33:40Z")

</div>

[quote=“Anonymity,post:194,topic:22396"”]

na, mang car looks nice. what is the adhisive that you used? and are you just applying it where the spot welds used to be.

[/quote]

I used a 3M Black Urethane, same as used for windshields. It was the reccomended route. I was going to use 3M Body Panel epoxy, but it’s a two part mix and gives me a short 20-30mins window to get everything done and in place. I wanted the extra time with the Urethane, it takes about 2hrs to set. I applied at all the way around the perimeter, to ensure no leaks.

For the most part, it just assembly that’s left at this point. But since i have everything gutted, it’s a great time to re-run wiring from my past DIY’s so everything is nice a clean and even run extra wiring for future projects.

---

_[View the full topic](https://forums.speedlife.net/t/unrelated-carbon-fiber-pole-project-phase-2-complete/22396)._