# very reluctant sale. my 90' 240sx roller **URL:** \ **Category:** Classifieds\ **Created:** [April 22, 2010, 10:47am UTC](https://forums.speedlife.net/t/very-reluctant-sale-my-90-240sx-roller/153803 "2010-04-22T10:47:43Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![ricers\_r\_us](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ricers_r_us/32/5144_2.png) [@ricers\_r\_us](https://forums.speedlife.net/u/ricers_r_us)\ **Post date:** [April 22, 2010, 10:47am UTC](https://forums.speedlife.net/t/very-reluctant-sale-my-90-240sx-roller/153803/1 "2010-04-22T10:47:43Z")
THIS IS NOT THE END OF MY 300SX PROJECT!!! i am simply selling because when i bought this i was in a jam. i took out a loan for it. engine went bye bye. and it sits as i make payment and insure it… gay. i want to rid this car and get another 240 shell for cheap to continue my project. my thinking is, no payment=more cash flow. it rolls right now, no engine, trans, ecu, exhaust. old for sale thread [http://www.nyspeed.com/showthread.php?54857-TW-FS-1990-Nissan-240SX&highlight](http://www.nyspeed.com/showthread.php?54857-TW-FS-1990-Nissan-240SX&highlight) -Skunk2 Lowering Springs -17" Tenzo RS5’s -BFGoodrich KDW -battery box in rear -interior is near mint but dash, heater core is out. -still has walbro 255lh -low mileage for 20 some years… 115,000 and some change rusted areas…drivers frame 3" hole. was 1 inch when i bought it. it grew both rockers surface rust. very small. pass rear lower 1/4 small surface rust. bondod for temp repair ![http://i10.photobucket.com/albums/a148/articzap/240%20for%20sale/S5001179.jpg](http://i10.photobucket.com/albums/a148/articzap/240%20for%20sale/S5001179.jpg) 2500 FIRM!!! will not part out, dont even ask… Now $2100 ---
**Author:** ![IanK](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/iank/32/5016_2.png) [@IanK](https://forums.speedlife.net/u/IanK)\ **Post date:** [April 22, 2010, 10:59am UTC](https://forums.speedlife.net/t/very-reluctant-sale-my-90-240sx-roller/153803/2 "2010-04-22T10:59:23Z")
$2500 For a typically rusted S13 roller ??? ---
**Author:** ![newman](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/newman/32/7569_2.png) [@newman](https://forums.speedlife.net/u/newman)\ **Post date:** [April 22, 2010, 10:59am UTC](https://forums.speedlife.net/t/very-reluctant-sale-my-90-240sx-roller/153803/3 "2010-04-22T10:59:41Z")
GL w/ that price… ---
**Author:** ![MaximaSE98](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/maximase98/32/7600_2.png) [@MaximaSE98](https://forums.speedlife.net/u/MaximaSE98)\ **Post date:** [April 22, 2010, 11:00am UTC](https://forums.speedlife.net/t/very-reluctant-sale-my-90-240sx-roller/153803/4 "2010-04-22T11:00:03Z")
i like the wheels…but I wont ask u to sell them or trade lol ---
**Author:** ![ricers\_r\_us](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ricers_r_us/32/5144_2.png) [@ricers\_r\_us](https://forums.speedlife.net/u/ricers_r_us)\ **Post date:** [April 22, 2010, 11:10am UTC](https://forums.speedlife.net/t/very-reluctant-sale-my-90-240sx-roller/153803/5 "2010-04-22T11:10:19Z")
typical rust yes. but not that bad. sandpaper and a few hours can fix that. someone skilled at painting can blend it in real nice. and a hour or two with a welder and some sheet metal can fix the small hole. other then that the paint is great. and i really havent found many 90’ s13 with only 115k ---------- Post added at 02:10 PM ---------- Previous post was at 02:07 PM ---------- > [@MaximaSE98](#): > > i like the wheels…but I wont ask u to sell them or trade lol if there is a buyer, maybe you can work something out so u get the wheels and the buyer pays less[COLOR=“Silver”] ---
**Author:** ![IanK](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/iank/32/5016_2.png) [@IanK](https://forums.speedlife.net/u/IanK)\ **Post date:** [April 22, 2010, 11:23am UTC](https://forums.speedlife.net/t/very-reluctant-sale-my-90-240sx-roller/153803/6 "2010-04-22T11:23:57Z")
> [@ricers\_r'\_us](#): > > typical rust yes. but not that bad. sandpaper and a few hours can fix that. someone skilled at painting can blend it in real nice. and a hour or two with a welder and some sheet metal can fix the small hole. other then that the paint is great. and i really havent found many 90’ s13 with only 115k > > ---------- Post added at 02:10 PM ---------- Previous post was at 02:07 PM ---------- > > if there is a buyer, maybe you can work something out so u get the wheels and the buyer pays less[COLOR=“Silver”] Doesn’t matter how many miles are on it, its a roller, and the simple fact is that there are FAR cleaner examples for significantly less than that. Hell you can buy a pretty clean runner for less than what your asking. Just a heads up. ---
**Author:** ![ricers\_r\_us](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ricers_r_us/32/5144_2.png) [@ricers\_r\_us](https://forums.speedlife.net/u/ricers_r_us)\ **Post date:** [April 22, 2010, 11:37am UTC](https://forums.speedlife.net/t/very-reluctant-sale-my-90-240sx-roller/153803/7 "2010-04-22T11:37:39Z")
alright alright new price. 2100 dollars and i will break even. you can get an engine for 1.5k to 2k and with that added into the cost of the roller that is a decently price car ---
**Author:** ![TrueBlue](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/trueblue/32/7245_2.png) [@TrueBlue](https://forums.speedlife.net/u/TrueBlue)\ **Post date:** [April 22, 2010, 12:01pm UTC](https://forums.speedlife.net/t/very-reluctant-sale-my-90-240sx-roller/153803/8 "2010-04-22T12:01:09Z")
You may want to x-post this on our sister site, you know, the one that deals with 240s exclusively :tup: ---
**Author:** ![ricers\_r\_us](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ricers_r_us/32/5144_2.png) [@ricers\_r\_us](https://forums.speedlife.net/u/ricers_r_us)\ **Post date:** [April 22, 2010, 2:36pm UTC](https://forums.speedlife.net/t/very-reluctant-sale-my-90-240sx-roller/153803/9 "2010-04-22T14:36:35Z")
just did ---
**Author:** ![Jim1234664](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jim1234664/32/7438_2.png) [@Jim1234664](https://forums.speedlife.net/u/Jim1234664)\ **Post date:** [April 22, 2010, 4:53pm UTC](https://forums.speedlife.net/t/very-reluctant-sale-my-90-240sx-roller/153803/10 "2010-04-22T16:53:21Z")
dude you are nuts with that price, I bought my 90 coupe shell rust free from georgia with the same milage for $300 two years ago, yes that was a good deal but you are asking complete dual cam pricing, not rusty buffalo shell ---
**Author:** ![ricers\_r\_us](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ricers_r_us/32/5144_2.png) [@ricers\_r\_us](https://forums.speedlife.net/u/ricers_r_us)\ **Post date:** [April 22, 2010, 6:44pm UTC](https://forums.speedlife.net/t/very-reluctant-sale-my-90-240sx-roller/153803/11 "2010-04-22T18:44:13Z")
ya i know but thats what i owe still… the paint is only like 3 years old. ---
**Author:** ![travisn](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/travisn/32/5046_2.png) [@travisn](https://forums.speedlife.net/u/travisn)\ **Post date:** [April 22, 2010, 6:51pm UTC](https://forums.speedlife.net/t/very-reluctant-sale-my-90-240sx-roller/153803/12 "2010-04-22T18:51:12Z")
what you owe =/ what its worth in every case. if you are selling it to pay off the loan and buy another one you should just keep this and pay off the loan with the money that would have bought another 240 ---
**Author:** ![ricers\_r\_us](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ricers_r_us/32/5144_2.png) [@ricers\_r\_us](https://forums.speedlife.net/u/ricers_r_us)\ **Post date:** [April 23, 2010, 10:27am UTC](https://forums.speedlife.net/t/very-reluctant-sale-my-90-240sx-roller/153803/13 "2010-04-23T10:27:10Z")
i know. i figured i would try at least. anyways all my ca18 spare parts are going with the car. if someone wants it. so u’d need a ca long block harness and ecu to drive it ---
**Author:** ![dftsilvia](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/dftsilvia/32/7447_2.png) [@dftsilvia](https://forums.speedlife.net/u/dftsilvia)\ **Post date:** [April 23, 2010, 10:32am UTC](https://forums.speedlife.net/t/very-reluctant-sale-my-90-240sx-roller/153803/14 "2010-04-23T10:32:15Z")
holy fuck balls!!! 2100 for a ROLLER! ARE U FUCKIN NUTS??? just because u owe that much on it doesnt mean u can sell it for that much. i’ll give u 500 for it right now ---
**Author:** ![Axis](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/axis/32/5149_2.png) [@Axis](https://forums.speedlife.net/u/Axis)\ **Post date:** [April 23, 2010, 10:56am UTC](https://forums.speedlife.net/t/very-reluctant-sale-my-90-240sx-roller/153803/15 "2010-04-23T10:56:51Z")
Is this whats left of the Most Unique 240sx in Wny? What happend to the ca? ---
**Author:** ![BREETIME](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/breetime/32/5214_2.png) [@BREETIME](https://forums.speedlife.net/u/BREETIME)\ **Post date:** [April 23, 2010, 11:43am UTC](https://forums.speedlife.net/t/very-reluctant-sale-my-90-240sx-roller/153803/16 "2010-04-23T11:43:40Z")
i just picked up a 95 s14… 95% rust free. with motor and drivetrain from miami. 500 one dollar bills. smoke rocks. ---
**Author:** ![SI01](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/si01/32/7187_2.png) [@SI01](https://forums.speedlife.net/u/SI01)\ **Post date:** [April 23, 2010, 1:17pm UTC](https://forums.speedlife.net/t/very-reluctant-sale-my-90-240sx-roller/153803/17 "2010-04-23T13:17:30Z")
> [@BREETIME](#): > > 500 one dollar bills. $50,000? It must be MAD clean. Anyway, if you owed nothing you wouldn’t give it away. Therefor it ain’t worth what you owe. ---
**Author:** ![livin4hockey](https://avatars.discourse-cdn.com/v4/letter/l/d2c977/32.png) [@livin4hockey](https://forums.speedlife.net/u/livin4hockey)\ **Post date:** [April 23, 2010, 2:20pm UTC](https://forums.speedlife.net/t/very-reluctant-sale-my-90-240sx-roller/153803/18 "2010-04-23T14:20:13Z")
> [@BREETIME](#): > > 500 one dollar bills. > [@SI01](#): > > $50,000? It must be MAD clean. WAT?!?!? ---
**Author:** ![ricers\_r\_us](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ricers_r_us/32/5144_2.png) [@ricers\_r\_us](https://forums.speedlife.net/u/ricers_r_us)\ **Post date:** [April 23, 2010, 3:30pm UTC](https://forums.speedlife.net/t/very-reluctant-sale-my-90-240sx-roller/153803/19 "2010-04-23T15:30:14Z")
this is a thread to sell a car. not to shit on about. if your interested, post something. if not… zip it ---
**Author:** ![dirtye30](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/dirtye30/32/7333_2.png) [@dirtye30](https://forums.speedlife.net/u/dirtye30)\ **Post date:** [April 23, 2010, 4:01pm UTC](https://forums.speedlife.net/t/very-reluctant-sale-my-90-240sx-roller/153803/20 "2010-04-23T16:01:00Z")
im interested at 500 [Next page](https://forums.speedlife.net/t/very-reluctant-sale-my-90-240sx-roller/153803.md?page=2)