# Vids of my runs from PRP 7/12.. new best

**URL:** <https://forums.speedlife.net/t/vids-of-my-runs-from-prp-7-12-new-best/191150>\
**Category:** PittSpeed Automotive\
**Created:** [July 13, 2007, 11:48am UTC](https://forums.speedlife.net/t/vids-of-my-runs-from-prp-7-12-new-best/191150 "2007-07-13T11:48:45Z")\
**Posts on this page:** 13\
**Page:** 1

<div class="post-metadata">

**Author:** ![Orr89rocz](https://avatars.discourse-cdn.com/v4/letter/o/ac91a4/32.png) [@Orr89rocz](https://forums.speedlife.net/u/Orr89rocz)\
**Post date:** [July 13, 2007, 11:48am UTC](https://forums.speedlife.net/t/vids-of-my-runs-from-prp-7-12-new-best/191150/1 "2007-07-13T11:48:45Z")

</div>

first time to the track this year with new setup.

Car now is a holley stealth rammed L98. I got rid of the TPI and put this manifold on a noticed a big improvement on the top end. pulls strong to 5200rpms, while TPI killed over at 4500.

traction problems all night, i had slight spins off the line. it would hook then unload then hook again so i think my suspension wasnt adjusted right. I shoud have either stiffened the front or possibly softened the rear. maybe stiffened the rear as well but the same setup was used to go 1.75 60 foots in the winter with TPI

Best run was this one

1.822 60 foot  
5.51 330  
8.62 at 75.36  
13.583 at 98.72 mph 1/4 mile

I’m happy with that. big improvement over stock TPI. TPI best was 13.63 at 96.9 in the november winter air. last night was lower mid 70s i’d say. cool for july, but the car has more in it for sure with cold weather and better 60 foot.

See vids of 3 of my runs here

[http://media.putfile.com/HSR-L98-track-times](http://media.putfile.com/HSR-L98-track-times)

---

<div class="post-metadata">

**Author:** ![SoLow](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/solow/32/6001_2.png) [@SoLow](https://forums.speedlife.net/u/SoLow)\
**Post date:** [July 13, 2007, 12:21pm UTC](https://forums.speedlife.net/t/vids-of-my-runs-from-prp-7-12-new-best/191150/2 "2007-07-13T12:21:53Z")

</div>

nice runs MPHBOY

---

<div class="post-metadata">

**Author:** ![Pewter](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pewter/32/5936_2.png) [@Pewter](https://forums.speedlife.net/u/Pewter)\
**Post date:** [July 13, 2007, 12:41pm UTC](https://forums.speedlife.net/t/vids-of-my-runs-from-prp-7-12-new-best/191150/3 "2007-07-13T12:41:15Z")

</div>

nice runs

---

<div class="post-metadata">

**Author:** ![GreekPower](https://avatars.discourse-cdn.com/v4/letter/g/9fc29f/32.png) [@GreekPower](https://forums.speedlife.net/u/GreekPower)\
**Post date:** [July 13, 2007, 12:45pm UTC](https://forums.speedlife.net/t/vids-of-my-runs-from-prp-7-12-new-best/191150/4 "2007-07-13T12:45:07Z")

</div>

nice runs, that stang in the last vid knows how to launch

---

<div class="post-metadata">

**Author:** ![Orr89rocz](https://avatars.discourse-cdn.com/v4/letter/o/ac91a4/32.png) [@Orr89rocz](https://forums.speedlife.net/u/Orr89rocz)\
**Post date:** [July 13, 2007, 12:45pm UTC](https://forums.speedlife.net/t/vids-of-my-runs-from-prp-7-12-new-best/191150/5 "2007-07-13T12:45:29Z")

</div>

it was fun racing that stang… he was pulling hard on the top end. i needed to out launch him to stand a chance lol… got him 1 out of 3 runs but the 3rd he redlighted so i guess i’m 2 for 3?

---

<div class="post-metadata">

**Author:** ![fmfkid250](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/fmfkid250/32/5973_2.png) [@fmfkid250](https://forums.speedlife.net/u/fmfkid250)\
**Post date:** [July 13, 2007, 1:10pm UTC](https://forums.speedlife.net/t/vids-of-my-runs-from-prp-7-12-new-best/191150/6 "2007-07-13T13:10:56Z")

</div>

nice!

time for the juice!

Was ali there last night?

---

<div class="post-metadata">

**Author:** ![Orr89rocz](https://avatars.discourse-cdn.com/v4/letter/o/ac91a4/32.png) [@Orr89rocz](https://forums.speedlife.net/u/Orr89rocz)\
**Post date:** [July 13, 2007, 1:18pm UTC](https://forums.speedlife.net/t/vids-of-my-runs-from-prp-7-12-new-best/191150/7 "2007-07-13T13:18:28Z")

</div>

didnt see her

and no nitrous, i want a cam

all 3 runs were with the same stang. that guy in the stang was cutting 1.79-1.83 60 foots with a stick and drag radials…definately drove it hard

---

<div class="post-metadata">

**Author:** ![fmfkid250](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/fmfkid250/32/5973_2.png) [@fmfkid250](https://forums.speedlife.net/u/fmfkid250)\
**Post date:** [July 13, 2007, 1:39pm UTC](https://forums.speedlife.net/t/vids-of-my-runs-from-prp-7-12-new-best/191150/8 "2007-07-13T13:39:26Z")

</div>

go get a cam!

when you want somethen go get it!

---

<div class="post-metadata">

**Author:** ![Orr89rocz](https://avatars.discourse-cdn.com/v4/letter/o/ac91a4/32.png) [@Orr89rocz](https://forums.speedlife.net/u/Orr89rocz)\
**Post date:** [July 13, 2007, 1:49pm UTC](https://forums.speedlife.net/t/vids-of-my-runs-from-prp-7-12-new-best/191150/9 "2007-07-13T13:49:58Z")

</div>

eh i’d have to pay for the cam and stuff…and i dont have the cash to do the whole swap lol… so the car must wait

---

<div class="post-metadata">

**Author:** ![eurodad](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/eurodad/32/5988_2.png) [@eurodad](https://forums.speedlife.net/u/eurodad)\
**Post date:** [July 13, 2007, 3:43pm UTC](https://forums.speedlife.net/t/vids-of-my-runs-from-prp-7-12-new-best/191150/10 "2007-07-13T15:43:44Z")

</div>

> [@OMG MUST READ](https://forums.speedlife.net/t/omg-must-read/31320/17):
>
> eh i’d have to pay for the cam and stuff…and i dont have the cash to do the whole swap lol… so the car must wait

i’ll give you an lt1 cam if you wanna try it. not sure if you would want to go through the trouble of the change since it’s only marginally bigger.

---

<div class="post-metadata">

**Author:** ![Orr89rocz](https://avatars.discourse-cdn.com/v4/letter/o/ac91a4/32.png) [@Orr89rocz](https://forums.speedlife.net/u/Orr89rocz)\
**Post date:** [July 13, 2007, 10:11pm UTC](https://forums.speedlife.net/t/vids-of-my-runs-from-prp-7-12-new-best/191150/11 "2007-07-13T22:11:26Z")

</div>

exactly…its only worth probly 15whp. not worth the trouble. but i’d take a LT4 Hotcam tho lol

---

<div class="post-metadata">

**Author:** ![Lazylaser](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/lazylaser/32/6033_2.png) [@Lazylaser](https://forums.speedlife.net/u/Lazylaser)\
**Post date:** [July 13, 2007, 10:56pm UTC](https://forums.speedlife.net/t/vids-of-my-runs-from-prp-7-12-new-best/191150/12 "2007-07-13T22:56:40Z")

</div>

nice runs! but your top end looks like it could use some cams,

---

<div class="post-metadata">

**Author:** ![Orr89rocz](https://avatars.discourse-cdn.com/v4/letter/o/ac91a4/32.png) [@Orr89rocz](https://forums.speedlife.net/u/Orr89rocz)\
**Post date:** [July 14, 2007, 11:25am UTC](https://forums.speedlife.net/t/vids-of-my-runs-from-prp-7-12-new-best/191150/13 "2007-07-14T11:25:57Z")

</div>

yep, its improved over TPI but definately needs a cam
